•Need to reserve a space on the work for head. —► Projection on work —► Hang up to head —► Need to form countersunk or put a cover on work to mask screw head. —> Difficult to reduce weight of work. <New material/method/structure etc.>• Resolve uncomfortable feeling of appearance and touch. • Assist your products to be lighter and mailer. • Bigger head diameter (bigger Contact area on bearing surface) Two choices of head height are available; Compare to conventional Pan head screw, LAMIX is Technical point D Bigger contact area of bearing surface and reinforce under the head effect to raise tightening torque. As it makes easy to control torque control, workability will be 0 improved especially in fastening by power tool. o

Head configuration shall be same for both of Machine screw & TAPTITE®*. Only for M2 screw, H shall be 0.3mm. Head configuration shall be same for both of Machine screw & TAPTITE®*. Only for M3 screw, H shall be 0.6mm. Nominal dia.(d) *TAPTITE® is registered trademark of RESEARCH ENGINEERING & MANUFACTURING INC.