NlTTOSElKD Minimize workpiece waste due to defects. Single-axis automatic screw driving machines FM513VZR Self-weight cancellation function Calculate and offset the weight of the screwdriver bit lift mechanism Ultra-low thrust Minimizing the load on the workpiece and reducing screw-tightening defects Reducing defects previously difficult to prevent © Easy thrust setting Set thrust [N] directly, regardless of the installed driver or tightening direction reduced by. approxsf/ O 70 by self-weight cancellation if unction i Prevent ±- diagonal tightening Reduce ^ the load on * Compared to the conventional mode 1 Thrust is set at the tip of the bit. * The maximum thrust is as same as that of the conventional model the workpiece Shortening cycle time Advanced thrust control y Maxspeedapproxf Control processing speed UP 1 Compared to the conventional model

Operation panel Screw driver controller Sensor cable (only case of NX driver) Motor cable Encoder cable H External signal cable Power cable Motor cable Encoder cable External signal cable (Option) Power cable External signal cable External signal cable Air hose (Provided by customer) Cable carrier is standard equipment Contributes to cable protection and maintainability •1: The type of driver varies depending on target torque. *2: Products will be built up based on specificatio of screws, therefore it can be used for one kind of screw only. *3: Application range of screws will be changed by type...