Single Spindle Screw Driving Machine (Enviromental loard reducction type)

Product catalog summary

Overview: This document provides technical specifications and system details for a screw feeder and screw driving unit by Nittoseiko. It outlines the components, connections, and advantages of the system, emphasizing its efficiency in screw supply and tightening processes.

Specifications: The screw driving unit is compatible with various screw types, including machine screws and self-tapping screws, with a torque range of 0.3 to 3.8 N・m. The unit supports different driver types based on target torque and is designed for specific screw specifications. The tightening stroke varies from 50 to 150 mm, with options for longer strokes.

System Components: The system includes a screw driving unit, driver controller, screw feeder, and customer's control equipment. The components are interconnected, with specified distances for optimal operation. The system diagram illustrates these connections.

Power and Air Supply: The system operates on a DC24V power supply with single-phase AC options. Air supply requirements are specified in MPa, ensuring proper operation of the vacuum and screw holding systems.

Error Detection and Safety: The system includes error detection features for torque failure, screw shortage, and screw height faults, with photoelectric sensors available for precise detection.

Advantages: Nittoseiko's screw tightening system offers reduced cycle times compared to traditional methods, enhancing productivity and efficiency.

Additional Information: The document notes that specifications are subject to change for performance improvements. Contact details for the Assembly Machine Division in Kyoto, Japan, are provided for further inquiries.

Catalog excerpts

Single Spindle Screw Driving Machine (Enviromental loard reducction type)-1

Eco-friendly Single Spindle Screw Driving Machine Ease in handling For those seeking balanceScrew Driving Unit with Eelectric Actuator on Z-AXIS.Well-balanced combination of sustainability, screw tightening quality, and ease in handling. Sustainability environmental impact Speed control and thrust control function Ease in handling like pneumatic Z-axis type Speed : High Thrust: High CO2 emissions of up-down motion for screw tightening Pneumatic FM515VE Z-axis type Speed and thrust are adjustable in the lowering and tightening process. Prevent thread damage Reduce impact It can be controlled only with parallel I/O input/output, making it simple ^Values vary depending on usage conditions. (Compared to our conventional products) It is also possible to pause when sucking up screws. Prevent screw suction failure Easy to replace from pneumatic Z-axis type Up-downsettingcanbesetupfrom ^ a remote place with a dedicated remote control unit, (option)

Open the catalog to page 1

Single Spindle Screw Driving Machine (Enviromental loard reducction type)-2

screw tightening. Outside dimensions of screw tightening unit （Unit：mm） A（Overall Length） Screw Driver Controller Screw Driving Unit Vacuum generator Customer's Control Equipment Drilled holes Screw feeder counterbore depth on the back side Tightening stroke Unit name Tightening stroke A （Overall Length） 5 0 st ※Compared to [Pick up type] （Tolerance of locating hole） Screw Driving Unit ⇔ Driver Controller Screw Driving Unit ⇔ Customer's Control Equipment Screw Driving Unit ⇔ Screw Feeder Customer's Control Equipment ⇔ Driver Controller Customer's Control Equipment ⇔ Screw Feeder Sp e c if ications...

Open the catalog to page 2