Screw Feeders

Entrust your parts feeding to NITTOSEIKO! NITTOSEIKO supplies 4 models of 3 different parts feeder types: disk type, drum (rotary cylinder) type and centerboard type. Their cost and noise level are lower and the required installation space is smaller compared with the other parts feeders. More than 50,000 feeders have been sold in Japan and overseas since they were introduced into the market. Small space Utilizing that accumulated expertize and experience, we can feed any part with confidence. NITTOSEIKO, a leading company in the field of screws and screw fastening machines, meets all of your feeding...

For precision screws and micro screws Disk Type Micro Screw Feeder Solution for Precision and Micro Screws Simple mechanism which is using rotary disk system. High efficiency is achieved because of very low incidence of jamming. Easy operation Disk can be changed to feed different diameter screws. No other adjustments are required. Any screw with the same shaf t diameter, no mat ter head-type or thread type, can be fed with the same disk. Precision screw/micro screw feeding Installation in automatic lines 0.6 mm dia., flat head, short length, micro screw, and other screws with captive washers can...

Drum Type Screw Feeder FF311DR The solution for screws with captive springs and plain washers A simple mechanism that lines up screws on the chute rail, clears screw jamming and stuck screws. This model is recommended if you use screws with captive springs and plain washers in PCB assembly. Screws with captive springs and plain washers rarely jam. Easy operation Removable drum makes supplying screws easy. Compact body Approx. 2/3 of A4 size. Body can be placed almost anywhere and can downsize the production line. Model number Note 1: Products will be built up based on specification of screws,...

Centerboard Type Screw Feeder Higher-quality screw feeding! Rivets, nuts, pins, steel balls, etc., can also be fed as well as screws and bolts. The compact body design enables installation almost anywhere and easy repositioning. Quickly Blow Feed Screws Singulate screws and feed by air. ※Dual escapement to feed two screws at once is available. Screw-friendly centerboard hopper The vertically driven track scoops and lines up screws. Price and noise are lower compared with oscillating bowl feeders. Very mild on screws and coatings. Horizontal linear feeding for screws minimizes jamming. Oscillation...

Large volume feeding Tumbling Barrel Type Auxiliary Hopper SH200 / SH300 Auxiliary hopper for less frequent screw filling (Optional) Separate installation space is not needed. Easy screw filling The barrel is removable. The hopper is directly mounted on the screw feeder and does not need as much installation space needed by a conventional auxiliary hopper. Low noise The motor-driven hopper generates very low running noise, Easy mounting and dismounting [ Specifications ] The hopper is a hanger type and can be easily mounted and dismounted. Model number Note 1: Screw length is 30mm or less and...