Set up distance between each device Power cable is not include a plug. -*2 Power cable is include a plug. ^3 Depends on Driver Type. ^4 An available points in model is max 12 when it using 64 models. Unit configuration diagram T type Arm-Driver ADI 00T T type Arm-Driver ADI OOTE with built-in the position checking function Application example \\ It will be fitted for the cell or small-rot multi production The arm-driver with built-in the position checking function which an arm portion is mounted encoder is not only providing the high accuracy screw driving by hand working but also it will be...

Performs stable screw driving quality which isn't depend on the skill of operator. Driver controller and Switch box Example of machine configuration ■ It can be reduced operator's burden by absorbing the torque reaction which is arising from during fastening with arm. ■ It can be moving easily the hanging driver or something. ■ The mounted driver is our own standard one, it's possible to setup the condition of multi-channel and can be handled the changeover products flexibly. ■ Lineup of two type, T type for small-footprint and V type for wide moving space. ■ It's easy installed and will be a...

Outside dimension(mm)and Working areaADIOOTE t Outside dimension and working area will be commonly utilized for both built-in position checking and not built-in this

Outside dimension (mm)and Working areaAD100VE % Outside dimension and working area will be commonly utilized for both built-in position checking and not built-in this

Selecting chart of driving tool 100N*m Torque of output shaft ^1 It's mounted the optional AC power supply unit. Please make sure the setting torque which is within an allowable torque to be used the balance arm. Here is for the introduction video of products. •Specifications and other matters are subject to modifications for performance improvements without notice. •Unique nouns like the product name indicated in this brochure are registered or not registered trademark of each company.