Delvo S Series Dk323
12Pages

Electric Screwdrivers Brushless Delvo S Series (Variable speed type) DLV30S/45S Model Brushless Motor Industry First Automatic 3 step Speed Control Built-in Screw Counting Functions Easy Setup with the Remote Controller (0.4 - 4.5 Nm) Lever Start / Push to Start s the Screwdriver ed Flexibility Help Add SP site

Setting Range for Standard Models The low speed level is effective in hard-to-fasten applications such as tapped holes in sheet metal, stainless steel, and plastic. The high speed level is effective in shortening the cycle time in an assembly line. 8.0 Speed Level Speed Level Speed Level *Graphs are for reference only. The actual values depend on usage conditions.

Brushless Delvo S Series • Standard Accessories • Power Supply • Remote Controller ‘Power cord included Main LED mounted on the screwdriver OK or NG operation and various setting statuses displayed/indicated on/by LCD and LED. ‘The Remote Controller is available as an option. Part Names of the Remote Controller LEDs and Setting Buttons on the Screwdriver Main LED Power Switch Setting Buttons

ESD Protection Compliant with IEC61340-5-1. ESD is the abbreviation of Electro-Static-Discharge. Drivers that display this are protected against static discharge. 1 - 9 speed setting available Wide range of specifications meet various screw fastening conditions. Speed Level Speed Level Speed Level • Setting Range of Speed and Torque (for reference only) 1 Setting Range of MAX 650 min-1 Series *Speed and torque are for reference only. The actual values depend on the materials to be fastened and size of screws. The values are not guaranteed.

Built-in Automatic Speed Control Function Industry first built-in Automatic three-step speed control improves efficiency and quality of screw fastening work. (Combines low starting speed, high feeding speed and slower speed at final stage of fastening.) Operation Timing Chart (an example of speed and time) Speed Speed level at middle Speed level at finish Speed level at start Rotation time at start Low speed starting helps reduce ・Reduces damage to screw head if the bit is not fully seated at start-up. ・Helps prevent cross-threading and screw damage if the threads are not clean. Rotation...

Screw Fastening Time measuring (see page 26 in the instruction manual.) The upper and lower limits of screw fastening time can be measured and set. (This prevents improper length screws or partially seated screws from being set and can check for damaged threads.) Stopped before Lower limit time Stopped within Upper limit and Lower limit time Stopped after Upper limit time Upper limit Built-in Auto Reverse Mode (see page 28 in the instruction manual.) The screwdriver automatically reverses after torque-up or reaching the preset time. Auto reverse mode can be used for temporarily fastening...

'see the instruction manual for the Remote Controller.) Built-in Security Function ;r) A password can be set to each screwdriver. When the power switch is turned on, the password will be required to operate the screwdriver. ‘Security function can be changed to on/off.

Up to eight types of motion setting or up to 8 channels can be saved in the screwdriver (see page 22 in the instruction manual.) Eleven functions in motion setting can be saved in each channel. Example of motion setting 1 : Number of screw fastening 2 : Speed level at start 3 : Rotation time at start 4 : Speed level at middle 5 : Rotation time at middle 6 : Speed level at finish 7 : Min. screw fastening time 8 : Max. screw fastening time 2 pieces Level 2 0.20 sec. Level 7 0.30 sec. Level 2 0.60 sec. 1.0 sec. 3 pieces Level 1 0.30 sec. Level 9 0.50 sec. Level 1 0.80 sec. 1.2 sec. 1 piece...

Built-in Bit Brake Function (see page 40 in the instruction manual) Upon releasing the start switch of the screwdriver, the bit will stop instantly. *Bit brake function can be changed to on/off. Upon releasing the start switch, the bit will stop instantly. Equipped with the External Signal Connector The screwdriver can accept an external signal or output a signal externally through the external signal connector. ‘Either Pin No.4 or 7 must be selected, but not both. Link Function (see page 55 in the instruction manual.) The screwdrivers operate in the screw fastening sequence. Up to 10...

Optional Accessories Power Supply Power Supply Signal Cable Ass’y Torque Checker Remote Controller Relay Cord (To connect DLW9073 and DLW9073) Pistol Grip Tool Balancer

External Dimensions (compact size) Saving Space Power Switch Infrared data transmission part 0.67” (17)

About certifications Nitto Kohki's Delvo electric screwdrivers are safe, secure and high quality products that are compliant with the international standards. SHIRAKAWA NITTO KOHKI CO., LTD. The logo for delvo is registered trademark or a trademark of Nitto Kohki Co., Ltd. in Japan, the United States and/or certain other countries. NITTO KOHKI U.S.A., INC. 46 Chancellor Drive, Roselle, IL 60172, U.S.A. Phone: (630) 924-9393 Toll Free: (800) 323-8828 Fax: (630) 924-0303 info@nittokohki.com www.nittokohki.com/