Applicable fluids for braided hose connection type depend upon the specifications of braided hoses to be used. • SUS316 is available as option. • Working pressure and working temperature range of TSP Cupla for braided hoses depend upon the specifications of braided hoses to be used. • Seal material for braided hoses is nitrile rubber. Working pressure Note: Depending on the temperature of steam/hot water, the heat may damage seal materials. Please contact one of our distributors. Water Hydraulic oil Chemicals Valveless structure suits high viscosity fluids! Various body materials, sizes and end configurations. Braided hose connection types are newly added. • Valveless construction drastically saves pressure loss and achieves high flow rate. • Suitable for high viscosity fluids (such as grease). • Available in various standard body materials, sizes and end configurations to cope with diversified applications and operating situations. • No hose clamp required! Simple and secure connection to braided hose. Note: See the pages of Seal Material Selection Table at the end of this catalog for the suitability of seal materials to fluids. Specifications Max. Tightening Torque • Tighten the nut for braided hoses until it is flush against the hose barb base. Flow DirectionInterchangeability If the first digit of model number of socket is the same as that of plug, they can be connected regardless of the end configurations. Min. Cross-Sectional Area (mm2) Model End configurations''-^

TPH type (Hose barb) Socket TSH type (Hose barb) WAF : WAF stands for width across flats. Application (Hose) Application (Hose) Plug TPM type (Male thread) Socket TSM type (Male thread) Plug TPF type (Female thread) Socket TSF type (Female thread) Model Application Steel Brass Plug TPN type (For braided hose connection) Socket TSN type (For braided hose connection) *1 : 1TSP steel is a made-to-order item. *2 : Stainless steel: 54 x 060 *3 : Stainless steel: 54 x 059 *4 : Stainless steel: 58 x 065 *5 : Braided hoses for TPN type and TSN type should be made of soft PVC and woven by reinforcement...

One-way shut-off Working pressure Seal material Working temperature range Applicable fluids Cupla Part Ball Valve Part Body material For low pressure general applications Valve structure Size (Thread) Socket with Ball Valve Working pressure Fluoro rubber Fluoropolymer resin Working temperature range One-piece design of TSP Cupla socket and ball valve. Sleeve stopper mechanism prevent accidental disconnection during connection. (when the valve is open.) Flow Direction Fluid may flow in either direction from plug or from socket side when coupled. • Socket valve can be opened and shut off while...

WAF : WAF stands for width across flats. Application TSP Cupla Socket with Ball Valve Socket BV-TSF type (Female thread) TSP Cupla Socket with Ball Valve Model TSP Cupla Socket + Commercially Available Ball Valve Connection part between a Standard TSP Cupla socket and a commercially available ball valve is eliminated for enhanced sealing and the overall length is reduced by around 30%. Before use, please be sure to read "Safety Guide" described at the end of this book and "Instruction Sheet" that comes with the products.