Specifications Cupla : Brass (Chrome-plated) Tube Fitter Type: Brass (Nickel-plated) Body material Small Cupla Thread Hose barb Tube barb (Tube fitter) Valve structure Applicable fluids Polyurethane tube: Outside Dia. ø6 ± 0.1, ø8 ± 0.15 +0.05 +0.05 Polyamide tube: Outside Dia. ø6 -0.08 , ø8 -0.1 Fluorine contained resin tube: Outside Dia. ø6 ± 0.07, ø8 ± 0.07 Lightweight and compact for use on air lines and scientific equipment Working pressure Working pressure One-way shut-off Lightweight and compact push-toconnect operation. Responding to requirements of modular combinations. • Compact socket with built-in valve and 14 mm OD sleeve. Suits applications calling for compact and modular components. • Just push in the plug to the socket for connection by easy one hand operation. • Chrome-plated brass for corrosion resistance adopted for the body. Stable performance for long life. • A wide line-up of end configurations (female and male threads, hose barbs, manifolds) enables suitability with a wide range of piping applications such as pneumatic, scientific and medical equipment. • Also available with quick connect/disconnect Tube Fitter type. Note: Fluid will flow out from the plug side when disconnected. Take necessary precaution if the fluid is water. Water (Tube Fitter type is unsuitable for water.) 145 Working temperature range Seal material Nitrile rubber Seal material Working temperature range • Above specifications apply only to Cuplas. Working pressure, pressure resistance and working temperature range may vary depending on tube materials you use with and its working temperature range. Size (Thread) Flow Direction Air flows in either direction from plug or socket side when coupled. Interchangeability Sockets and plugs can be connected regardless of end configurations. Tube Fitter Type Tube Fitter Type for 8 mm OD for 6 mm OD tube tube Socket only Plug only When connected Pressure - Flow Characteristics [Test conditions] • Fluid : Air • Temperature : Room temperature • Tube size : ø6 mm x ø4 mm, ø8 mm x ø6 mm (Small Cupla with Tube Fitter) Chrome-plated brass body Push-to-connect design with automatic shut-off valve Compact 14 mm OD sleeve Wide variety of end conf

WAF : WAF stands for width across flats. Plug PN type (For connection to hose) Socket SN type (For connection to hose) Application (Hose) Plug PM type (Male thread) Socket SM type (Male thread) Plug PF type (Female thread) Socket SF type (Female thread) Plug PC type (Tube Fitter) Socket SC type (Tube Fitter) Application (Tube) Application (Tube) Plug PCL type (L-shaped Tube Fitter) Socket SCL type (L-shaped Tube Fitter) Socket MS-5 type (Small Line Cupla with 5 branch ports) Application (Tube) Socket SCB type (Tube Fitter for panel mounting) Before use, please be sure to read "Safety Guide" described...