Body material Special steel (Nickel-plated) Flow Rate - Pressure Loss Characteristics [Test conditions] •Fluid : Hydraulic oil •Temperature : 30°C ± 5°C Male tapered thread Male parallel thread PL type (safety sleeve lock type) The body material is quenched to cope especially with impulses Both socket and plug have built-in automatic shut-off valves. Valve design differs depending on sizes. The photo is for 6HS & 6HP Flow rate in L/min Body is made of special steel The flow volume of male thread type is increased by 5 to 10% compared with that of female thread type with conversion nipple. ^Precautions for use There is no interchangeability between HSP Cupla and 210 Cupla or 280 Cupla. Do not connect to each other even if sizes are similar.

HP type (Female tapered thread) Product appearance may vary by size. / WAF : WAF stands for width across flats. Plug HP-R type (Male tapered thread) Socket HS-R type (Male tapered thread) Plug HP-GP type (Male parallel thread with 30° flare) Socket HS-GP type (Male parallel thread with 30° flare) T O-ring mounting position Model Application* Mass (g) O-ring size HP-GS type (Male parallel thread with 30° cone-seat) Socket HS-GS type (Male parallel thread with 30° cone-seat) T O-ring mounting position *The counterpart of GP type must be the female parallel thread specified in JIS B 8363 with 30°...