*mydirectindustry

Hi Cupla 200

Product catalog summary

Overview: The document provides detailed specifications and features of the Hi Cupla 200, a push-to-connect type coupling designed for low-pressure air lines. It highlights the product's specifications, interchangeability, and suitability for various applications.

Specifications:

Body Material: Steel (Chrome-plated)
Sizes Available: 1/4", 3/8", 1/2"
Working Pressure: 1.5 MPa (15 kgf/cm²)
Seal Material: Nitrile rubber (NBR)
Working Temperature Range: -20°C to +60°C

Key Features:

Simple and secure push-to-connect operation, enhancing efficiency by reducing connection time.
New valve design minimizes pressure loss, increasing flow rate by 15% over conventional models.
End-face seal design prevents seal damage from exhausted lubrication.
Not suitable for water or oil applications.
Available with quick connect/disconnect Tube Fitter type.

Interchangeability: The Hi Cupla 200 is interchangeable with Hi Cupla Models 20, 30, and 40, as well as corresponding series models.

Limitations:

Not suitable for vacuum applications in either connected or disconnected conditions.
Fluid must flow from socket to plug.

Applications: Suitable for miniature pneumatic equipment, automatic control equipment, physicochemical equipment, and medical devices. Compatible with polyurethane, nylon, and fluorine-contained resin tubes.

Additional Options: The document also describes Nut Cupla, Nut Cupla 200, and Rotary Nut Cupla for connection to braided hoses, featuring a hose guard nut to prevent kinking and a ball bearing swivel mechanism to relieve tension.

Safety and Usage: Users are advised to read the "Safety Guide" and "Instruction Sheet" provided with the products before use.

Catalog excerpts

WAF : WAF stands for width across flats. Application example Hi Cupla 200 Socket SH type (Hose barb) ft Socket SM type (Male thread) Socket SF type (Female thread) Models Models and Dimensions (With Tube Fitter)Socket SC type (Tube Fitter) Hex.29 With pneumatic tools • The outer dimensions of Model 200-100SC are a little bit different from those of other models. Plug PC type (Tube Fitter) All of socket, plug and tube can be connected in one push-to-connect operation. No need of pulling the sleeve before the connection. Just push-to-connect operation. For 6 mm OD tube For 8 mm OD tube For 10 mm...

Open the catalog to page 2

Working pressure

Open the catalog to page 3

Hi Cupla for Connection to Braided Hoses / Nut Cupla / Nut Cupla 200 / Rotary Nut Cupla Models and Dimensions (Nut Cupla / Nut Cupla 200) WAF : WAF stands for width across flats. PN type (Hi Cupla for connection to braided hoses) SN type (Hi Cupla for connection to braided hoses) Grease is applied to the threaded part of steel nut to prevent galling. Application Wall Thickness Body material • Mass (g) (Hose) (mm) Steel Brass Grease is applied to the threaded part of steel nut to prevent galling. PN type (For urethane hose connection) Application Wall Thickness Body material • Mass (g) (Hose)...

Open the catalog to page 4

All Nitto Kohki Europe catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list