Catalogs >
Nitto Kohki Europe >
Full Blow Cupla

Full Blow Cupla
2Pages

Catalog excerpts

Not suitable for vacuum application in either connected or disconnected condition. Push-to-connect operation can be made with no line pressure While the plug and socket are connected, valve can be opened or closed Unique full-open gate type valve [Test conditions] •Fluid : Air •Temperature : Room temperature 3.0 i 2.5 2.0 E 1 1.0 e IV 0.5

Open the catalog to page 1

WAF : WAF stands for width across flats. Features of Full-Blow Cupla Full-Blow Cupla Socket SH type (Hose barb) Model Socket SM type (Male thread) Socket SF type (Female thread) Pressure loss is reduced to the ultimate level. Up to about 40% increase in flow rate compared with conventional Cuplas. Socket SN type (For urethane hose connection) Model Application (Hose) 06.5 mm x 010 mm 08 mm x 012 mm Mass (g) 64 67 HowJtWorks 1. Open the valve Only after connection with the plug, you can slide the socket sleeve B toward the plug in order to open the built-in valve. Full flow path is then...

Open the catalog to page 2

Full Blow Cupla 2Pages

Catalog excerpts

All Nitto Kohki Europe catalogs and technical brochures

Full Blow Cupla
2Pages