Multifunction Electric Screwdriver Model Built-in brushless motor Automatic speed control function Built-in screw counting function Setting with the Remote Controller Lever Start / Push to Start ng conditions. th various fasteni wi SHIRAKAWA NITTO KOHKI CO., LTD.

Electric Screwdrivers Setting Range for Standard Models The low speed level is effective in hard-to-fasten applications such as tapped holes in sheet metal, stainless steel, and plastic. The high speed level is effective in shortening the cycle time in an assembly line. 8.0 Speed Level Speed Level Speed Level Speed Level *Graphs are for reference only. The actual values depend on usage conditions. 1

Electric Screwdrivers ddvo Model DLV30S/45S/70S 1 Setting Range of MAX 650 min1 Series 1 Setting Range of MAX 1,200 min'1 Series Setting Range of MAX 2,000 min-1 Series „ . , Lever Start ‘Speed and torque are for reference only. The actual values depend on the materials to be fastened and size of screws. The values are not guaranteed. DLV30S20 Speed Level Speed Level • Power Supply Model • Corresponding Electric Screwdrivers per Power Supply DEA0151N-AZ DEA0241N-AZ DLV30S06L-AY • Remote Controller Model

Electric Screwdrivers ddvo Model DLV30S/45S/70S series LEDs Mounted on the Screwdriver OK or NG operation and various setting statuses displayed/indicated on/by LCD and LED. *The Remote Controller is available as an option. ESD Protection Compliant with IEC61340-5-1. ESD is the abbreviation of Electro-Static-Discharge. It means the discharge of static electricity. 1 - 9 speed setting available Wide range of specifications meet various screw fastening conditions. • Setting Range of Speed and Torque (for reference only) Speed Level ‘Speed and torque are for reference only. The actual values depend...

Electric Screwdrivers Built-in Automatic Speed Control Function Contributing to improvement of efficiency and quality of screw fastening work. (Combination of low speed at start, high speed during feeding, and low speed at the final stage of fastening) Operation Timing Chart (an example of speed and time) Speed Speed level at middle Speed level at finish Speed level at start Rotation time at start Rotation time at middle Rotation time at finish Low speed starting reduces the following problems. High speed feeding at middle improves efficiency and quality of screw fastening work. Low speed fastening...

Electric Screwdrivers Screw Fastening Time measuring (see page 26 in the instruction manual.) The upper/lower limit of screw fastening time can be set. (Prevents contamination of wrong screws or partially seated screws, detects damaged screws) Stopped before Lower limit time Stopped within Upper limit and Lower limit time Stopped after Upper limit time Upper limit Built-in Auto Reverse Mode (see page 28 in the instruction manual.) The screwdriver automatically reverses after torque-up or reaching the preset time. Auto reverse mode can be used for temporarily fastening screws or verifying tapped...

Electric Screwdrivers ddvo Model DLV30S/45S/70S series Built-in Security Function (see the instruction manual for the Remote Controller) You can set a password to each screwdriver. When the power switch is turned on, without a password the electric screwdriver will not operate. ‘Security function can be changed to on/off.

Electric Screwdrivers Up to eight types of motion setting or up to 8 channels can be saved in the screwdriver (see page 22 in the instruction manual.) Eleven functions in motion setting can be saved in each channel. Example of motion setting Channel 1 : Number of screw fastening 2 : Speed level at start 3 : Rotation time at start 4 : Speed level at middle 5 : Rotation time at middle 6 : Speed level at finish 7 : Min. screw fastening time 8 : Max. screw fastening time 2 pieces Level 2 0.20 sec. Level 7 0.30 sec. Level 2 0.60 sec. 1.0 sec. 3 pieces Level 1 0.30 sec. Level 9 0.50 sec. Level 1 0.80...

Electric Screwdrivers ddvo Model DLV30S/45S/70S series Built-in Bit Brake Function Upon releasing the start switch of the screwdriver, the bit will stop instantly. *Bit brake function can be changed to on/off. Equipped with the External Signal Connector The screwdriver can accept an external signal or output a signal externally through the external signal connector. ‘Either Pin No.4 or 7 must be selected, but not both. The screwdrivers operate in the screw fastening sequence. Up to 10 screwdrivers can be connected to the Link. Standby screwdrivers do not operate.

Electric Screwdrivers Optional Accessories North America Power Supply • Power cord is not included Remote Controller Torque Checker Power Supply Grounded 3-Prong Power Cord • Power cord is not included Signal Cable Ass’y DLW9090 Relay Cord (To connect DLW9073 and DLW9073) Connection Cord Pistol Grip Tool Balancer

Electric Screwdrivers RC1000 Infrared data transmission part Power Switch Various Buttons

Electric Screwdrivers About certifications Nitto Kohki's Delvo electric screwdrivers are safe, secure and high quality products that are compliant with the international standards. cTUVus The logo for delvo is a registered trademark or a trademark of Nitto Kohki Co., Ltd. in Japan, the United States and/or certain other countries. Head Office 9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555, Japan Tel : +81-3-3755-1111 Fax : +81-3-3753-8791 E-mail : [email protected] This catalog is printed using environmentally friendly paper and vegetable oil inks. Minus Carbon Printing Systems Specifications...