*mydirectindustry

CMX-20

Product catalog summary

Overview: The document provides detailed information about the TK127 Pneumatic Sander, distributed by Nitto Kohki Co., Ltd. It highlights the tool's suitability for sanding in narrow, confined, and hard-to-reach areas, with applications in automotive sheet metal painting, castings, and machined parts.

Specifications: The sander operates at an air pressure of 0.6 MPa with an air consumption of 0.15 m3/min. It features an orbit diameter of 2 mm and weighs 0.53 kg without the pad. The free speed varies with the pad type: 14500 min-1 for the 2” round pad and 13000 min-1 for both the rectangular and 16 mm finger pads.

Features: The sander is compact, lightweight, and designed to minimize vibration. It includes three types of pads: a 2” round pad, a rectangular pad, and a 16 mm finger pad, each suitable for different sanding tasks.

Applications: The tool is effective for putty sanding, removing blemishes, sanding scratches, oxidized marks, paint drips, and clumps. It is also used for sanding rough surfaces of castings, tooling marks, and slight level differences on milled surfaces.

Accessories: The sander comes with various abrasive discs and sheets, including Velcro and self-adhesive options in different grits (#80, #120, #180). It also includes an ultra-thin wrench, a tool box, and a bushing R 1/4 x NPT 1/4.

Standards: The product complies with ISO 9001 and ISO 14001 standards, ensuring quality and environmental management.

Usage Instructions: Pad replacement is facilitated with an included spanner and hex socket screw key. Speed adjustment is possible via an adjust valve to suit different materials and desired finishes.

Catalog excerpts

Pneumatic Sander Pneumatic Sander NITTO KOHKI CO., LTD DISTRIBUTED BY Specifications and designs are subject to change at any time without notice. Head Office 9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555, Japan Tel : +81-3-3755-1111 Fax : +81-3-3753-8791 E-mail : [email protected] This catalog is printed using environmentally friendly paper and vegetable oil inks. ISO 9001 JQA-2042 Machine Tools Division ISO 14001 JQA-EM4057 NITTO KOHKI CO., LTD. Compact, Lightweight, and Low Vibration Automotive Sheet Metal Painting • Putty sanding to remove blemishes, especially in confined areas Sheet Metal • Sanding scratches made during handling • Sanding oxidized marks where spot welding was performed Painting • Removing drips and clumps of paint • Easily removes paint overspray Castings • Sanding rough surfaces of castings due to an aged casting die • Sanding burrs around the spots where the ejector pins contact Machined parts • Sanding tooling marks left on milled surfaces • Sanding a slight difference in level caused by tool change on a milled surface

Open the catalog to page 1

Pneumatic Sander Pneumatic Sander Removing rust on small _surfaces Removing rust on small surfaces Removing weld discoloration on stainless steel *When an abrasive sheet is used, the base material may be removed. Removing rust on small surfaces' Removing weld discoloration on stainless steel *ln the case of non-woven abrasive sheet, it does not remove base metal. It may not clean heavily discolored welds. fe.Rectangular Pad Removing drips and clumps of paint Sanding a slight difference in level caused by tool change on a milled surface Putty sanding to remove light scratches Speed Adjustment...

Open the catalog to page 2

All Nitto Kohki Europe catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list