Sagittarius 2000 LEL

Product catalog summary

Overview: The SAGITTARIUS 2000 is a high-quality analytical solution designed for monitoring solvent concentrations in various environments, including dryers, ovens, and ducts. It is suitable for both indoor and outdoor applications and is equipped with advanced features to ensure precise and reliable measurements.

Key Features:

Harsh Application Suitability: Can handle sample temperatures up to 200°C.
Chemical Detection: Capable of detecting any chemicals that respond to a flame.
Flexible Mounting: Model 2201 can be installed near the sampling point for convenience.
Low Measure Drifts: Calibration checks are recommended every six months due to minimal drift.
Fast Response Time: Achieves a T90 response time of less than 2 seconds, excluding the sampling line.

Technical Specifications:

Detector Type: Flame Ionization Detector (Ex-Proof).
Sampling Lines: Supports 1 to 4 analytical lines.
Measurement Range: 0 to 100% LEL or g/Nm³.
Lower Detectable Level: 0.1% full scale.
Stability and Accuracy: Both are less than 1% full scale.
Sample Flow Speed: 2.5 liters per minute.
High Sample Gas Temperature: Up to 200°C for model 2001 HT.
Analog Outputs: 4-20mA or 0-10Volt.
Communication Options: Modbus or Profinet.
Power Supply: 230Vca or 115Vca (optional).
Hydrogen Requirements: 99.995% purity, 2 bars, 40ml/min.
Compressed Air: Oil and humidity-free, at 5 bar, 4m³/h.
Working Temperature: 5 to +40°C for standard, -10°C to +50°C for rack assembly.
Dimensions and Weight: Model 2201: 300x600x400 mm, 35 kg; Model 2001: 2000x800x800 mm, 220 kg.

Sampling System: Utilizes a maintenance-free ejector (Venturi) to suck sample gas, ensuring constant monitoring of flow and vacuum to prevent anomalies. The system stabilizes the sample by putting it at atmospheric pressure before detection, offering greater stability and reduced maintenance compared to traditional systems.

FID Detector and Hydrogen Management: The explosion-proof FID detector is designed for industrial use, offering lab-grade analytical capabilities. It can detect solvent concentrations down to ppb levels. The hydrogen used for flame combustion is managed safely with continuous monitoring and a leak sensor to stop flow in case of anomalies.

Compliance: The system complies with EN1539:2015 and EN60079-29-1 standards.

Catalog excerpts

New Instruments and Research for Analysis LEL MONITORING, DETECTION OF FLAMMABLE GASES IN EAPLOSIUE ATMOSPHERES SAGITTARIUS 2000 is the highest analytical quality solution, as a LEL monitoring system, to check the solvent concentration in evacuation from dryers, ovens and ducts, etc. developed for a wide range of (indoor and outdoor) applications. which respond to a flame It can be installed nearby the sampling point of analysis a calibration check is suggested every 6 months only (T90 <2s, sampling line excluded) COMPACTFID LEL MONITORING SYSTEM

Open the catalog to page 1

SAMPLING SYSTEM AND LOOP ANALYTICAL TECHNOLOGY Our exclusive sampling system sucks the sample gas by the usage an ejector (Venturi), completely maintenance free. The sample is constantly monitored in term of flow and vacuum to warn against any possible anomaly that may invalid the analyses results (sample loss, filter clogging, ejector air pressure drop, H2 pressure drop, etc.). After the sampling system, the sample gas is picked up through a loop, put at atmospheric pressure and pushed into the detector; this system guarantees much more stability and less maintenance than the standard continuous...

Open the catalog to page 2

All Nira Srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list