Multipoint VOC analyser Scorpio-Taurus

Product catalog summary

Overview
The document describes a system designed to monitor solvent concentration during the stripping phase of absorbers in Recovery Solvent Plants. It highlights the system's long-term stability, low maintenance costs, and easy interfacing capabilities.

System Features

Stability: Utilizes a sampling loop instead of continuous capillary flow for enhanced stability.
Cost Efficiency: Features an exclusive sampling valve and ejector sampling system, reducing maintenance needs and requiring only one servo gas (hydrogen).
Interfacing: Equipped with PC embedded technology operating on Windows®XP, with Ethernet and USB ports for easy connectivity.

System Applications

The SCORPIO 3000 is suitable for "stripping steam" Recovery Solvent Plants.
The TAURUS 4000 is suitable for "stripping inert gas" Recovery Solvent Plants.

Benefits

Allows monitoring of solvent concentration at various points within the Recovery Solvent Plant.
Includes independent monitoring systems for L.E.L. and emissions under European regulations.

Technical Characteristics

Detector System: Flame Ionization
Measurement Ranges: Low (0-50, 100, 1000 mg/Nm³), Medium (0-10, 20 g/Nm³), High (0-200, 500 g/Nm³)
Response Time: 3 seconds per line
Accuracy and Linearity: ±1% FS
Operating Conditions: Temperature +5°C to +40°C, Hydrogen pressure 3 bar, Air pressure 4 bar
Outputs: 0-10V, 4-20mA, RS 232, USB, Ethernet
Display: 10.5” TFT screen
Power Supply: 230V, 50/60Hz, 500Va (110V optional)
Dimensions and Weight: Box Version - 19” x 6u x 47c, 20 kg each; Rack Version - 600x800x1900mm, 200 kg

Configuration Options
The system offers multiple points of analysis and can be configured based on specific customer needs.

Catalog excerpts

Multipoint VOC analyser Scorpio-Taurus-1

New Instruments and Research for Analysis These multi-line VOC analyzers can be integrated and used to control many different phases of any Recovery Solvent Plant. itable for "stripping steam Recovery Solvent Plant. The TAURUS 4000 system is suitable for "stripping inert gas" Recovery Solvent Plant. sampling loop instead of continuous capillary flow. > Lower maintenance and management costs: exclusive sampling valve (no mechanical parts in motion), ejector sampling system (maintenance free) instead of the classic sample pump and only one servo gas required (hydrogen). ■ PC embedded technology working on Windows®XP operating system (Ethernet and USB ports).

Open the catalog to page 1

Multipoint VOC analyser Scorpio-Taurus-2

com POINTS OF ANALYSIS One point of analysis can be used to monitor the solvent concentration at the entrance of the Recovery Solvent Plant. Some points of analysis can be used to monitor the solvents concentration inside the activated carbon adsorbers. One point of analysis can be used to monitor the TOC in emission from the chimney. Others points of analysis can be created and used based on specific customer needs. The system is supplied inside a standalone rack IP55 and multi-line sampling system. Independent L.E.L. monitoring system also available. (Sagittarius system). Independent emission...

Open the catalog to page 2

All Nira Srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list