1. Catalogs
  2. Nippon Chemi-con
  3. CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS

CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS

CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS
1 / 39 PagesView full catalog

CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS

Product catalog summary
Overview: This technical catalog provides comprehensive information on various types of capacitors, including multilayer ceramic capacitors, varistors, film capacitors, and choke coils. It includes detailed specifications, guidelines, and packaging information for these components.
Product Specifications: The catalog details specifications for multilayer ceramic capacitors, such as rated voltage, capacitance ranges, temperature characteristics, and RoHS2 compliance. It advises verifying specifications before purchase as they are subject to change.
Part Numbering System: Detailed part numbering systems are provided for different capacitor types, including chip type, metal cap type, and radial lead type. Codes represent type, voltage, capacitance, tolerance, and packaging.
Packaging Information: Specifies minimum packaging quantities and details on taping and tray packaging for various capacitor series and sizes, including reel specifications and quantities per reel.
Precautions and Guidelines: Extensive guidelines for using and installing multilayer ceramic capacitors are provided. Key points include using capacitors within rated limits, avoiding excessive DC voltage, and considering temperature and bias voltage effects. Guidelines for PC board design and soldering processes are also included to prevent mechanical stress and thermal deformation.
Design Considerations: Recommendations for designing device circuits and PC boards include proper solder volume, land dimensions, and handling mechanical stress during installation. Advice on flux use and soldering conditions is provided to maintain capacitor performance.
Soldering Procedures: Emphasizes preheating substrates before soldering and maintaining temperature differences. Guidelines for reflow and flow soldering are provided, with specific instructions for larger capacitors.
Cleaning and Handling: Advises on ultrasonic cleaning duration and appropriate cleaning agents to avoid weakening terminations. Guidelines for hand soldering, including pre-heating and soldering iron specifications, are included.
Storage Guidelines: Capacitors should be stored below 40℃ and 70% RH, with a storage life of two years from purchase.
Coating Materials: Care must be taken with resin coatings to avoid stress from thermal expansion and harmful gas release during curing.
Standards and Compliance: References AEC-Q200 standards for automotive applications and provides information on discontinued series and replacements, ensuring RoHS compliance.
Key Recommendations: Avoid excessive mechanical shock, ensure proper pre-heating before soldering, and use appropriate tools to prevent damage during board cutting. Verifying product specifications before use is emphasized.
Specifications: Includes temperature range, rated voltage, capacitance range, tolerance, temperature characteristics, and rated ripple current capabilities for multilayer ceramic capacitors.
Features and Applications: Capacitors are designed for a temperature range of -55 to +150℃, with excellent noise absorption and automotive-grade quality. Suitable for noise filters in automotive equipment and high-temperature environments.
Construction: Details include ceramic dielectric, tin-plated termination, and internal electrodes. Capacitors are RoHS compliant and undergo temperature cycling tests.
Product Availability and Warranty: Products purchased outside official channels may incur investigation costs. The company reserves the right to discontinue products and does not guarantee future availability. Compensation is limited to non-conforming goods.
Safety Notes: Users should read 'Notes on Use' to prevent faults and accidents. Products are not designed for critical applications affecting human life or causing major social impacts without prior consultation.
Product Categories: Includes Aluminum Electrolytic Capacitors, Multilayer Ceramic Capacitors, Film Capacitors, Metal Oxide Varistors, Nanocrystalline/Amorphous/Dust Choke Coils, and Electric Double Layer Capacitors.
See more

Catalog excerpts

CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-1

CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS CAT.NO.E1002C / E1006F / E1003Z / E1008X

 Open the catalog to page 1
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-2

MULTILAYER CERAMIC CAPACITORS Production Guide Series Table Part Numbering System Packaging Minimum Packaging Quantity Precautions and Guidelines Standardization Product Specifications NTS Series / NTF Series KVF Series NTJ Series KVJ Series NTD Series KVD Series Characteristics Data

 Open the catalog to page 2
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-3

MULTILAYER CERAMIC CAPACITORS Rated Voltage Rated Capacitance Temperature Characteristics Range(µF) Range (Vdc) Chip Type Chip Type SERIES TABLE RoHS2 Compliant Chip Type Metal cap Type Metal cap Type Lead Type Lead Type Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information con

 Open the catalog to page 3
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-4

MULTILAYER CERAMIC CAPACITORS PART NUMBERING SYSTEM Part Numbering System ◆ PART NUMBERING SYSTEM (CHIP TYPE) Code Ceramic capacitor Series code Voltage code Code Temp. character Temp. character Capacitance code code Capacitance tolerance Size code Supplement code Tin plating, Size design code Taping code Terminal code Type Standard Excellent temp.cycle Bending:1mm Excellent temp.cycle Bending:2mm ◆ PART NUMBERING SYSTEM (METAL CAP) Code K Code Temp. character Ceramic capacitor Series code Voltage code Size code Taping Bulk Capacitance tolerance Temp. character Capacitance code code Code Voltage(V)...

 Open the catalog to page 4
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-5

MULTILAYER CERAMIC CAPACITORS ◆CHIP TYPE TAPING SPECIFICATION T1 Dimensions (mm) Size Code Chip type *Reference ●REEL Size Code NTS, NTF, KVF Series quantity per reel (pcs. / reel) NTJ, KVJ Series quantity per reel (pcs. / reel) Size Code Size Code Note : Refer to STANDARD RATINGS Note : Refer to STANDARD RATINGS ◆RADIAL LEAD TYPE TAPING SPECIFICATION Straight Crimped lead lead P0 / 2 P KVD Series Available for 32, 43, 55, 76 sizes. Ammo Packaging. Dimensions H (mm) Straight lead 23max. 24max. 26max. 29max. Size Code Note : Refer to STANDARD RATINGS P0 Product specifications in this catalog are...

 Open the catalog to page 5
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-6

MULTILAYER CERAMIC CAPACITORS Minimum Packaging Quantity Please order by units of minimum packaging quantity. ◆ Chip Series Size code Rating other than the above Size code Rating other than the above Rating other than the above All rating other than the above ◆ Radial Lead Series Size code Rating other than the above Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.

 Open the catalog to page 6
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-7

MULTILAYER CERAMIC CAPACITORS The circuits described as examples in this catalog and the "delivery specifications" are featured in order to show the operations and usage of our products, however, this fact does not guarantee that the circuits are available to function in your equipment systems. We are not in any case responsible for any failures or damage caused by the use of information contained herein. You should examine our products, of which the characteristics are described in the "delivery specifications" and other documents, and determine whether or not our products suit your requirements...

 Open the catalog to page 7
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-8

MULTILAYER CERAMIC CAPACITORS 3 Installation (1) When installing leaded capacitors in the PC boards by means of an automatic insertion machine, minimize the mechanical shock applied to the capacitors by the lead clinch unit of the machine. (2) When the capacitors are to be mounted on a substrate, please minimize the shock and weight to the capacitor bodies. The nozzle pressure during the mounting process should be adjusted to 1N~3N maximum in static load. (3) Periodically maintain and inspect installation machines. (4) Where an adhesive is used to pre-anchor capacitors on PC boards, use appropriate...

 Open the catalog to page 8
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-9

MULTILAYER CERAMIC CAPACITORS 5 Soldering profile Flow Soldering Profile Reflow Soldering Profile Gradual cooling Natural cooling at R.T. 250℃ max., 10 sec.max. 60 sec. max. (Max. period of time over 220℃) 160~190℃ 120 sec. max. 3 min. max. Preheat Temperatuer(℃) (1) Do not expose the product to temperatures of 250℃ or higher. Gradual cooling Natural cooling at R.T. *Flow Soldering Tin plating (Size code : 31, 32, 43) 6 Cleaning (1) In the case that the assembly boards are washed, choose the appropriate cleaning agent for the washing purpose. (2) To determine the cleaning conditions, make sure by...

 Open the catalog to page 9
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-10

MULTILAYER CERAMIC CAPACITORS The Automotive Electronics Council (AEC) was originally established by American major automotive manufactures. Today, the committees are composed of representatives from the sustaining Members of manufacturing companies in automotive electrical components. It has standardized the criteria for "stress test qualification" and "reliability test" for the electronic components. AEC-Q200 is the reliability test standard for approval of passive components, it has been specified test subjects and quantity etc. for each components. Criteria of reliability tests such as our...

 Open the catalog to page 10
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-11

MULTILAYER CERAMIC CAPACITORS STANDARDIZATION The following series were discontinued.Please use the replacements in the table. ◆MULTILAYER CERAMIC CHIP CAPACITORS Discontinued series TCCS TCCR THCS THCR TMCS Y5U, Termination (Tin Plating) Y5U, Termination (Silver) Y5U, Termination (Tin Plating), Down sized Y5U, Termination (Silver), Down sized Y5U, Termination (Tin Plating), High Reliability ◆METAL CAP TYPE MULTILAYER CERAMIC CAPACITORS Discontinued series TCP THP TMP Characteristics Y5U Y5U, Down sized Y5U, Down sized, High Reliability ◆DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS Discontinued...

 Open the catalog to page 11
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS-12

MULTILAYER CERAMIC CHIP CAPACITORS Series (General product) Compliant Series Temperature cycle : 1000 cycles 1. Large capacitance by small size. 2. X7R and X7S temperature characteristics. 3. High permissible ripple current capability. 4. NTF: Temperature cycle : 1000 cycles. 1. Smoothing circuit of DC-DC converters. 2. On-board power supplies. 3. Voltage regulators for computers. 3. Noise suppressor for various kinds of equipments. 4. High reliability equipments. ◆CONSTRUCTION Ceramic Dielectric Internal Electrode Category Temperature Range Rated Voltage Range Rated Capacitance Range Rated Capacitance...

 Open the catalog to page 12

All Nippon Chemi-con catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.