Product description The DT-2025 large flow low concentration smoke and flue gas tester is a new generation of smoke and flue gas tester developed by our company. This instrument uses the Pitot tube parallel isokinetic sampling method to collect particulate matter in the exhaust gas of stationary pollution sources, determines the mass of smoke and dust by the filtration and weighing method, and qualitatively and quantitatively determines the components of flue gas by the constant potential electrolysis method. It ensures the reliability of the instrument, improves the stability of the system, and enhances the accuracy of control. It can be used to measure the emission concentration, conversion concentration, and total emission of particulate matter from various boilers, flue ducts, industrial furnaces, and other stationary pollution sources, as well as the dust removal and desulfurization efficiency of equipment; it can automatically measure parameters such as flue gas dynamic pressure, flue gas static pressure, flow velocity, Ningxia MaiYa Sensor Technology Development Co., LTD

pressure before the flowmeter, temperature before the flowmeter, flue gas temperature, moisture content, O2, SO2, CO, NO, NO2, H2S, and CO2 concentration. Main application The instrument is widely used in environmental testing companies, industrial and mining enterprises, power plants, steel mills, cement plants, sugar mills, paper mills, smelters, ceramic factories, boiler furnaces, as well as aluminum, magnesium, zinc, titanium, silicon, pharmaceutical industries, including chemical fertilizers, chemicals, rubber, and material factories, and in the fields of health, labor, safety supervision,...

export supports Excel and TXT two formats; 11. Real-time recording of the working status data of the equipment, with the function of power failure memory during the sampling process; 12. Equipped with a high-speed and low-noise miniature thermal printer, making it easy to grasp the real-time data.

Main Parameters Accuracy Indication error: better than ±5.0% Repeatability: <2.0% Response time: <90 s Stability: the indication change within 1 h is not greater than 5.0% Lifetime: about 2 years in air (except CO2) Ningxia MaiYa Sensor Technology Development Co., LTD

Orange Rubber Tube Attention 1) During transportation and use, the tester should avoid strong vibration, collision, and the intrusion of dust, rain, and snow as much as possible. 2) When sampling on site, make sure to use 220V AC power! Prevent damage to the instrument or even personal injury caused by incorrect connection to other industrial power sources. 3) There should be an interval of more than 5 seconds before turning on the instrument again after shutting it down. Ningxia MaiYa Sensor Technology Development Co., LTD Address: Tower A, Yinchuan Zhongguan cun Innovation Center, Helanshan...