Catalog excerpts
The sensor is used to detect combustible gases leaking into air, including natural gas (methane), petroleum gas, urban gas, and is a broad-spectrum gas sensitive element.The gas concentration is from 0 to 100%LEL .The series of elements are not suitable for detecting Class ppm combustible gas. 1. Features Excellent stability Excellent reproducibility and accuracy With fuel gas concentration into linear output Fast response characteristics 4 series standard 2. Application Concentration detection of natural gas, liquefied gas, methane and organic solvent vapor such as gasoline, alcohol, ketone and benzene. Flamammable gas leakage alarm Combustible gas Detector Gas concentration meter Ningxia MaiYa Sensor Technology Development Co
Open the catalog to page 14. Basic test circuit The catalytic element is composed of a detection element and a compensation element, The working principle is shown in Figure 2: Fig.2 Ningxia MaiYa Sensor Technology Development Co., LTD
Open the catalog to page 26. Sensitivity characteristics and response recovery properties 7. last stability a) Zero-drift in the air Ningxia MaiYa Sensor Technology Development Co., LTD
Open the catalog to page 3MST-EX/2.9V combustible gas sensor b) 0.5% CH4 Sensitivity Prevent sensor from falling from high places or hitting strongly. The ements will be damaged to varying degrees in hydrogen sulfide and silicon organic environments. Do not exceed the rated voltage. Do not soak the sensor in water. Please seal them in plastic bags for long-term storage of sensors. Be sure to wait until it is completely dry before attaching the element if If an insulation paint or adhesive is used. The sensor shall be used where the combustible gas concentrations is below the explosion limit. The...
Open the catalog to page 4