1. Catalogs
  2. Ningguo BST Thermal Products Co.,Ltd
  3. 2:1 Heat Shrinkable Braided Sleeving

2:1 Heat Shrinkable Braided Sleeving

2:1 Heat Shrinkable Braided Sleeving

2:1 Heat Shrinkable Braided Sleeving

Product catalog summary
Product Overview
Ningguo BST Thermal Products Co., Ltd offers high temperature and abrasion-resistant protection through their BSTFLEX Abrasion-resistant Heat Shrinkable Braided Sleeving. This product is designed to provide durable protection for various applications.
Specifications
  • Standard Sizes: Available in inside diameters ranging from 10mm to 70mm, with corresponding part numbers HSS010 to HSS070.
  • Custom Sizes: Available in inside diameters of 25mm, 35mm, and 80mm, with part numbers HSS025, HSS035, and HSS080.
  • Heat Shrink-ability: The product has a thermal shrinkage ratio of 2:1, with a wall thickness of approximately 1.0 mm after full shrinkage. Longitudinal change after contraction is between -10% to -20%.
Temperature Ratings
  • Operating Temperature Range: -40℃ to 125℃ for 3000 hours.
  • Service Temperature Range: -40℃ to 150℃ for 1000 hours.
  • Minimum Shrinkage Temperature: 110℃.
  • Recommended Shrinkage Temperature: 120℃ to 150℃.
  • Maximum Storage Temperature: 50℃.
Materials
  • Warp Material: Polyester multifilament.
  • Latitudinal Material: Irradiation crosslinking, modified polyolefin (PE-7042).
  • Coating Material: Modified polyolefin.
Performance
  • Wear Resistance: Tested under a 200g load with a 0.3mm metal knife edge at 10Hz for 10 minutes, resulting in 144,000 cycles without wear at temperatures of 23℃, 80℃, and 125℃.
  • Thermal Aging Property: Maintains wear resistance after 168 hours at 125℃ and 24 hours at 150℃.
  • Flame Retardancy: Meets MVSS 302 standards, uncracked.
  • Low Temperature Flexibility: Uncracked after 4 hours at -40℃.
  • Solvent Resistance: Resistant to antifreeze, engine oil, mineral hydraulic fluid, detergent, brake oil, unleaded gasoline, and diesel oil after soaking at 23℃ for 24 hours.
See more

Catalog excerpts

2:1 Heat Shrinkable Braided Sleeving-1

NINGGUO BST THERMAL PRODUCTS CO.,LTD www.bstbraidedsleeve.com Abrasion-resistant Heat Shrinkable Braided Sleeving Custom Size PART NO. HSS025 HSS035 HSS080 Note: D is the initial inner diameter of the product; D is the inner diameter after complete heat shrinkage Heat Shrink-ability Thermal shrinkage ratio: 2:1 The wall thickness of braided pipe after full shrinkage is about 1.0 mm Longitudinal change after complete contraction: - 10 ~ - 20% Temperature Grade High temperature and abrasion resistant protection fro

 Open the catalog to page 1
2:1 Heat Shrinkable Braided Sleeving-2

NINGGUO BST THERMAL PRODUCTS CO.,LTD www.bstbraidedsleeve.com Operating temperature range (3000 hours): - 40 ℃ ~ 125 ℃ Service temperature range (1000 hours): - 40 ℃ ~ 150 ℃ Minimum shrinkage temperature: 110 ℃ Recommended shrinkage temperature: 120 ℃ ~ 150 ℃ Maximum storage temperature: 50 ℃ Materials Warp material: polyester multifilament Latitudinal material: irradiation crosslinking, modified polyolefin (PE-7042) Coating material: modified polyolefin Basic performance Performance Wear resistance: (200g load, 0.3mm metal knife edge, 10Hz, 10min stroke, 144000 cycles) Thermal aging property...

 Open the catalog to page 2

All Ningguo BST Thermal Products Co.,Ltd catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.