JT84F SUBMINIATURE HIGH POWER RELAY

Product catalog summary

Overview: The JT84F is a subminiature high power relay with a 16A switching capability. It features various mounting positions, a rotating armature structure, and is environmentally friendly (RoHS compliant). The relay is available in 1 Form A, 1 Form B, and 1 Form C configurations and is dust protected.

Specifications:

Outline Dimensions: 47.0 x 32.0 x 28.5 mm
Contact Resistance: 50mΩ max (at 1A 24VDC)
Max Switching Voltage: 250VAC
Max Switching Current: 16A
Mechanical Endurance: 61 x 10⁶ operations
Electrical Endurance: 47 type: 3 x 10⁴ operations (8A 250VAC, General use, at 40°C)

Contact Data:

Nominal Voltage: 6, 12, 24, 48, 120 VAC
Pick-up Voltage: ≤5.1 to ≤40.6 VAC
Drop-out Voltage: ≥1.2 to ≥9.6 VAC
Max Voltage: 6.6 to 52.8 VAC
Coil Resistance: 4.8 to 300 Ω

Characteristics:

Dielectric Strength: 2500VAC 1min between coil & contacts
Insulation Resistance: 500MΩ (at 500VDC)
Operate Time: 25ms max
Release Time: 25ms max
Shock Resistance: 98m/s² 11ms
Vibration Resistance: 10Hz to 55Hz 2.54mm DA
Humidity: 5% to 85% RH
Ambient Temperature: -40°C to 65°C
Unit Weight: Approx. 75g

Coil Data:

Nominal Voltage: 6, 9, 12, 24, 48, 120, 240, 277 VDC
Pick-up Voltage: ≤4.50 to ≤90.0 VDC
Drop-out Voltage: ≥0.6 to ≥12.0 VDC
Max Voltage: 6.6 to 132 VDC
Coil Resistance: 17.5 to 11000 Ω

Safety Approval Ratings:

8FLA, 25LRA 250VAC at 40°C
Resistive at 65°C: 16A 250VAC
General Use at 40°C: 8A 250VAC

Ordering Information: The relay can be ordered with specific coil voltages ranging from 6VAC to 277VAC for AC types and 6VDC to 120VDC for DC types. Contact arrangements include 1 Form C, 1 Form A, and 1 Form B.

Disclaimer: The specifications are for reference only and subject to change without notice. Users should determine the suitability of the product for their application and contact JINTIAN for technical service if needed.

Catalog excerpts

SUBMINIATURE HIGH POWER RELAY Features 16A switching capability Various of mounting position Rotating armature structure 1 Form A, 1 Form B and 1 Form C configurations Dust protected type Environmental friendly product(RoHS compliant) Outline Dimensions:(47.0 x 32.0 x 28.5)mm File No:E319069(AC type only) CONTACT DATA COIL DATA Contact arrangement Contact resistance Contact material 1A,1C Contact rating (Res.load) Max.switching power Notes: 1)The data shown above are intial values. CHARACTERISTICS Insulation resistance Between coil&contacts Between open contacts Dielectirc strength Mechanical endurance Electrical endurance Max.switching current Max.switching voltage Operate time(at nomi.volt.) Release time(at nomi.volt.) Notes: 1)The data shown above are intial values. 2)*Maximum Voltage refers to the maximum voltage which relay coil could endure in a short period of time. Temperature rise(at nomi.volt.) Shock resistance( Functional ) Vibration resistance SAFETY APPROVAL RATINGS Ambient tenperature Unit weight Dust protected Construction Notes: 1)The data shown above are intial values. 2) UL insulation system: Class A. Notes: 1)All values unspecified are at room temperature. 2)Only typical loads are listed above.Other load specificationgs can be avaliable upon request. COIL DC type: Approx.

Open the catalog to page 1

ORDERING INFORMATION JT3FD SUBMINIATURE HIGH POWER RELAY Type Contact arrangement 1: 1 Form C 4: 1 Form A 7: 1 Form B Contact arrangement Coil voltage XXX: Customer special requirement Notes:1) The customer special requirement express as special code after evaluating by JINTIAN. OUTLINE DIMENSIONS,WIRING DIAGRAM AND PC BOARD LAYOUT Unit: JT3FD SUBMINIATURE HIGH POWER RELAYmm Outline Dimensions 77 66.7 47 Wiring Diagram Terminals type Remark: 1) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole size is the recommended...

Open the catalog to page 2

JT84F SUBMINIATURE HIGH POWER RELAY

JT84F SUBMINIATURE HIGH POWER RELAY

Catalog excerpts

All NINGBO ZETTLER ELECTRONICS CO., LTD. catalogs and technical brochures