JT32F-G SUBMINIATURE HIGH POWER RELAY

Product catalog summary

Overview: The JT32F-G is a subminiature high power relay with a 10A switching capability and a 1 Form A configuration. It is designed for standard PCB layouts and is available in plastic sealed and flux proofed types. The product complies with IEC 60335-1 standards and features a UL insulation system of Class F.

Specifications:

Dimensions: 18.4 x 10.2 x 15.3 mm
Contact Resistance: 100mΩ max (at 1A 6VDC)
Max Switching Voltage: 277VAC/30VDC
Max Switching Current: 10A
Mechanical Endurance: 61 x 10⁶ operations
Electrical Endurance: 51 x 10³ operations (10A 250VAC, resistive load, room temp., 1s on 9s off)

Coil Data:

Nominal Voltage: Available in 3, 5, 6, 9, 12, 18, 24, 48 VDC
Coil Resistance: Varies with voltage, e.g., 55Ω for 5VDC, 5120Ω for 48VDC
Coil Power: Approx. 450mW

Characteristics:

Dielectric Strength: 2500VAC 1min between coil & contacts
Insulation Resistance: 1000MΩ (at 500VDC)
Operate Time: 8ms max
Release Time: 5ms max
Shock Resistance: Functional 98m/s², Destructive 980m/s²
Vibration Resistance: 10Hz to 55Hz 1.5mm DA
Humidity: 5% to 85% RH
Ambient Temperature: -40 to 105°C

Safety Approvals: The relay is certified by UL, CUL, TUV, VDE, and CQC, with various ratings for different temperatures and voltages.

Construction and Design: The relay is available in plastic sealed and flux proofed constructions, with a unit weight of approximately 6g. It is designed for PCB mounting.

Recommendations:

For clean environments, flux proofed types are recommended.
For unclean environments, plastic sealed types should be validated in real applications.
Contact JINTIAN for technical service if water cleaning or surface processing is involved in assembling relays on PCB.

Disclaimer: Specifications are subject to change without notice. Users should determine the suitability of the product for their application.

Catalog excerpts

SUBMINIATURE HIGH POWER RELAY Features 10A switching capability 1Form A configuration Sumbminiature,standard PCB layout Plastic sealed and flux proofed types Product in accordance to IEC 60335-1 available UL insulation system:Class F Outline Dimensions:(18.4 x 10.2 x 15.3)mm CONTACT DATA Contact arrangement Contact resistance Coil power Contact material Contact rating (Res.load) Max.switching voltage Max.switching current COIL DATA Notes: 1)The data shown above are intial values. CHARACTERISTICS Insulation resistance Between coil&contacts Notes: 1)The data shown above are intial values. 2)*Maximum Voltage refers to the maximum voltage which relay coil could endure in a short period of time. Between open contacts Dielectirc strength Mechanical endurance Electrical endurance Max.switching power Operate time(at nomi.volt.) Release time(at nomi.volt.) Shock resistance Vibration resistance Ambient tenperature SAFETY APPROVAL RATINGS Termination Unit weight Construction PCB Approx. 6g Plastic sealed, Flux proofed Notes: 1)The data shown above are intial values. JINTIAN RELAY ISO9001、ISO14001、OHSAS18001 CERTIFIED Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are list

Open the catalog to page 1

ORDERING INFORMATION JT3FD SUBMINIATURE HIGH POWER RELAY Type Coil voltage Contact arrangement Construction 1)2) Contact material Insulation standard Special code S: Plastic sealed Nil: Flux proofed T: AgSnO2 XXX: Customer special requirement Nil: Standrad Notes:1) We recommend flux proofed types for a clean environment(free from contaminations like H 2S,SO 2,NO 2,dust,etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H 2S, SO 2,NO 2,dust,etc.). 2) Contact is recommended for suitable condition and specifications...

Open the catalog to page 2

JT32F-G SUBMINIATURE HIGH POWER RELAY

JT32F-G SUBMINIATURE HIGH POWER RELAY

Catalog excerpts

All NINGBO ZETTLER ELECTRONICS CO., LTD. catalogs and technical brochures