MINIATURE HIGH POWER RELAY 30A switching capability PCB & QC types available 1 Form A, 1 Form B and 1Form C types available Plastic sealed and dust protected type available UL insulation system:Class F available Environmental friendly product (RoHS compliant) Outline Dimensions:(32.2 x 27.5 x 19.8)mm Products with QC 3.2mm pin diameter are available CONTACT DATA Contact arrangement Coil power Contact material Contact rating (Res.load) Max.switching voltage Max.switching current Max.switching capacity Mechanical endurance COIL DATA Electrical endurance Notes: 1) The data shown above are intial values. 2) Long time current-carrying under 40A condition is prohibited. CHARACTERISTICS Insulation resistance Between coil&contacts Between open contacts Dielectirc strength Operate time(at nomi.volt.) Release time(at nomi.volt.) Ambient tenperature Functional Shock resistance Vibration resistance Humidity Termination Unit weight Construction PCB&QC Approx. 30g Plastic sealed Dust protected Notes: 1) For plastic sealed type,the venting-hole should be opened in test. 2) The data shown above are intial values. 3) Please find coil temperature cerve in the characteristic curves below. 4) UL insulation system:Class F,Class B. 5) It is recommended that the terminal of the process QC cannot pass through more than 25A current for a long period of time. JINTIAN RELAY ISO9001、ISO14001、OHSAS18001 CERTIFIED JINTIAN RELAY 1A type (Dust protected) :1 x 10 ops (30A 240VAC,Resistive load, AgCdO,Room temp.,1s on 9s off) 1B type (Dust protected) :1 x 10 5 ops 15A 240VAC,Resistive load, AgCdO,Room temp.,1s on 9s off) Notes: 1) The data shown above are intial values. 2) *Maximum Voltage refers to the maximum volt

SAFETY APPROVAL RATINGS UL/CUL Contact material Load type General purpose General purpose Definite purpose (LRAloaded rotor) (FLA-full load) Motor load Notes: 1) All values unspecified are at 40°C. 2) Only typical loads are listed above. Other load specifications can be available upon request.

ORDERING INFORMATION JT3FD SUBMINIATURE HIGH POWER RELAY Type Contact arrangement Coil voltage Contact material Insulation standard Special code XXX: Customer special requirement Nil: Standrad Notes:1) We recommend dust protected types for a clean environment(free from contaminations like H2S,SO2or NO2,dust,ect.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment(with contaminations like H 2S,SO 2 or No 2 ,dust,ect.). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling...

OUTLINE DIMENSIONS,WIRING DIAGRAM AND PC BOARD LAYOUT Unit: JT3FD SUBMINIATURE HIGH POWER RELAYmm 1 Form C 27.5 (Bottom view) Remark:1) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole size is the recommended design size of the PCB board hole. The specific PCB board hole design size can be mapped and adjusted according to the actual producet. 2) In case of no tolerance shown in outline dimension:outline dimension ≤1mm,tolerance should be ±0.2mm;outline dimension＞ 1mm and≤5mm,tolerance should be±0.3mm;outline...