JT2150W SOLAR RELAY
2Pages

SOLAR RELAY Features 35A switching capability Applicable to solar photovoltaic inverter Applicable to UPS 1.8mm contact gap Product in accordance to IEC60335-1 available Low coil holding voltage contributesto saving energy of equipment UL insulation system:Class F available Environmental friendly product (RoHS compliant) Outline Dimensions:(31.8 x 27.0 x 19.1)mm CONTACT DATA Contact arrangement Contact material Coil power Holding voltage Contact rating (Res.load) Max.switching voltage Notes: 1)The coil holding voltage is the voltage applied to coil 100ms after the rated voltage. 2) To avoid overheating and burning, the coil can not be consistently applied to with voltage larger than maximun holding voltage. Max.switching power Mechanical endurance COIL DATA Electrical endurance Notes: 1)The circuit printed by the relay shall be designed with suffcient current carrying section to aviod overheating . Insulation resistance Between coil&contacts Between open contacts Dielectirc strength Notes: 1)The data shown above are intial values. 2)*Maximum Voltage refers to the maximum voltage which relay coil could endure in a short period of time. Surge withstand voltage Operate time(at nomi.volt.) Release time(at nomi.volt.) Coil temperature rise (at nomi.volt.) 70K max. (Contact load current 43A, rated voltage excitation 50%, at 85°C) 98m/s 2 Functional Shock resistance Vibration resistance SAFETY APPROVAL RATINGS Ambient tenperature Termination Unit weight Plastic sealed Dust protected Notes: 1) The data shown above are intial values. JINTIAN RELAY ISO9001、ISO14001、OHSAS18001 CERTIFIED Notes: 1)Only typical loads are listed above. Othe

ORDERING INFORMATION JT3FD SUBMINIATURE HIGH POWER RELAY Type Contact arrangement Dielectirc strength Coil voltage Construction Contact material E:Plastic sealed Special code: Solar Special code Nil:Dust protected XXX: Customer special requirement Notes:1) We recommend dust protected types for a clean environment(free from contaminations like H2S,SO2or NO2,dust,ect.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment(with contaminations like H 2S,SO 2 or No 2 ,dust,ect.). 2) Contact is recommended for suitable condition and...