MINIATURE HIGH POWER RELAY Features 17A switching capability Surge voltage up to 6kV (between coil and contact) Product in accordance to IEC 60335-1 available Plastic sealed and flux proofed type available Environmental friendly product (RoHS compliant) Outline Dimensions:(21.2 x 16.0 x 21.8)mm CONTACT DATA CONTACT DATA Contact arrangement Contact material Max.switching voltage Max.switching current Max.switching capacity Contact rating (Res.load) Mechanical endurance Electrical endurance Between coil &contacts Between open contacts Surge voltage( Between coil &contacts) Notes: 1) The data shown above are intial values. 2) *Maximum Voltage refers to the maximum voltage which relay coil could endure in a short period of time. Release time(at nomi.volt.) Operate time(at nomi.volt.) CHARACTERISTICS COI L Insulation resistance COIL DATA Notes: 1) The data shown above are intial values. 2) For plastic sealed type, the venting-hole should be opened in electrical endurance test. Dielectirc strength Coil power Ambient tenperature Functional Shock resistance Vibration resistance SAFETY APPROVAL RATINGS Humidity Unit weight Construction Approx. 15g Plastic sealed Flux proofed Notes: 1) The data shown above are intial values. JINTIAN RELAY ISO9001、ISO14001、OHSAS18001 CERTIFIED Notes: 1)All values unspecified are at room temperature. 2)Only typical loads are listed

ORDERING INFORMATION Type Coil voltage Contact arrangement E:Plastic sealed Insulation standard XXX:Customer special requirement Nil:Flux proofed Notes:1) We recommend dust protected types for a clean environment(free from contaminations like H2S, SO2 or NO2 , dust,ect.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment(with contaminations like H 2S,SO 2 or NO 2 ,dust,ect.). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) The customer special...

OUTLINE DIMENSIONS,WIRING DIAGRAM AND PC BOARD LAYOUT Unit: JT3FD SUBMINIATURE HIGH POWER RELAYmm PCB Layout (Bottom view) Remark:1) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole size is the recommended design size of the PCB board hole. The specific PCB board hole design size can be mapped and adjusted according to the actual producet. 2) In case of no tolerance shown in outline dimension:outline dimension ≤1mm,tolerance should be ±0.2mm;outline dimension＞ 1mm and≤5mm,tolerance should be±0.3mm;outline...