SOLAR RELAY Typical Applications Solar inverter, AC/DC power control, industrial control etc.. CONTACT DATA Contact arrangement Contact resistance 1) 35A switching capability Applicable to solar photovoltaic inverter Applicable to UPS 1.5mm and 1.8mm contact gap available Product in accordance to IEC60335-1 available Low coil holding voltage contributesto saving energy of equipment UL insulation system:Class F available Environmental friendly product (RoHS compliant) Outline Dimensions:(30.5 x 16.0 x 26.5)mm Contact material Coil power Contact rating Max.switching voltage Max.switching current Notes: 1)The coil holding voltage is the voltage applied to coil 100ms after the rated voltage.To avoid overheating and burning, the coil can not be consistently applied to with voltage larger than maximun holding voltage. Max.switching power Mechanical endurance Electrical endurance COIL DATA Between coil&contacts Between open contacts Dielectirc strength Surge withstand voltage Operate time(at nomi.volt.) Release time(at nomi.volt.) Notes: 1)The data shown above are intial values. 2)Maximum Voltage refers to the maximum voltage which relay coil could endure in a short period of time. Vibration resistance Functional Shock resistance Notes: 1) The data shown above are intial values . Ambient tenperature Termination Unit weight SAFETY APPROVAL RATINGS Dust protected Notes: 1) The data shown above are intial values. JINTIAN RELAY ISO9001、ISO14001、OHSAS18001 CERTIFIED Notes: 1)Only typical loads are listed above. Other lo

ORDERING INFORMATION JT3FD SUBMINIATURE HIGH POWER RELAY Type Contact material Coil voltage XXX: Customer special requirement Notes:1) JT102FW is dust protected products, w ater cleaning is not allowed . 3) The customer special requirement express as special code after evaluating by JINTIAN. OUTLINE DIMENSIONS,WIRING DIAGRAM AND PC BOARD LAYOUT Unit: JT3FD SUBMINIATURE HIGH POWER RELAYmm Outline Dimensions Wiring Diagram (Bottom view) (Bottom view) Remark:1) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole...