MAGNETIC PULLEY 1 .Can be produced with cost saving ferrite magnets, also can be produced with powerful rare earth magnets if needed The maximum magnetic strength can reach 15000Gs. 2.Surface material is 304 or 316L stainless steel, good corrosion resistance and no pollution. 3.No electric power required for magnetic field generation; 4.Two side special design ensure good link with motor. 5.Form automatic separation system together working with belt. 6.Special requirement can be custom made. RotaiY Grate Magnetic Separator Ftae Housing Magnetic Separator Half Magnetic Magnetic Pulleys always are placed at the head of conveyor belt to separate iron particle, iron scrap, tramp iron and other ferromagnetic objects from more bulk dry material flow such as iron ore, grain, sand, gravel, plastics, wood, waste, cullet, rubber, etc. MAGNETIC FORCE TESTER 1 .Key part is imported from Japan. 2.The magnetic ball is extraordinary round, processing by special process. 3.The tension ami that connected with magnetic ball is made of nonmagnetic material with proper length. 4.Max test magnetic force is 49N. 5.Corresponding list of magnetic force and magnetic strength is available in the instruction of tester. B.Test magnetic force visually, different from other products which just test the magnetic flux density value at any time. Magnetic Force Testers are designed for testing magnetic force visually. It can be an accessory of your magnetic separator to detecting the change of the magnetic force. Magrierrjc Sepfl-atcw Cross Bait Magnetic Separator Electric Dnrr Half Magnetic