STRAIGHT-SIDE DOUBLE CRANK PRESS - Circulating centralized lubricating oil installations - Independent electrical control box - Anti Vibration Devine - Power plug - Main motor reversing device - Safety light sensor - Security and safety latch stopper - Presetting counter (6 digits) - Load detection Device - Misfeed Detection Device - Base screws and base plate - Security and safety ladder rack - Quick Die Change Device FREQUENCY CONVERSION ENERGY Technical parameter Rated Tonnage Point Stroke Length Stroke Per Minute Die Height Slide Adjustment Slide Area Bolster Area Bolster Thickness Side Opening Working Height Main Motor Slide Adjustment motor Frame Structure Functions Features mm - H-type frame is consist of three parts:crossbeam,uprights and base,tightened by four tensile screw rods,with high rigidity and less deformation - Two crank shaft structure and Left-Right layout,large center distance between two connecting-rods,strong load deviation resistant capability suitable for continuous die - Combined pneumatic friction clutch brake,low noise,large clutch torque,small braking angle and long service life - Eight-side long rectangle of slide,with hight moving precision - Hydraulic overload protection device,to reliable use and flexible action - Optional accessories(air cushion and movable working table) are available according to the customer’ sneeds