C-FRAME SINGLE CRANK SERVO PRESS Advantages of servo press over traditional press: - Speed can be set and changed freely during machining with incomparable production usability. - Compare with traditional press, servo press with less mechanical parts, which is easier for maintenance;speeding up of return stroke to significantly increase production efficiency. - Stoke height and performance can be programmed with production flexibility. - Optimized performance to improve part quality and prolong dies service life. - Efficient drive solution to decrease energy consumption. - Fine turning with hand wheel to greatly shorten die test time. HMI interface: - Moving curve programme (crankshaft mode, multi-link mode, pressure maintaining mode, single side mode, tick-tock mode.muting punching mode, repeat pressurizing mode, free prog ramming mode) - Production state inspection, preset and counting,etc. - Real time indicating of motor torque,crankshaft angle and Slide performance mode:- General crankshaft performance mode.- Link performance mode. - Repeat pressurizing of short stroke and low speed blanking near BDC to reduce noise, pressure maintaining and pressure. - Easy to achieve control with feeding device. - Proper operating mode is selected by trial operating and programmed freely by customers. - Control function of instant energy releasing during machining. Nominal Pressure Nominal Pressure Stroke Bolster Plate Slide Plate Motor Mode Servo press movement curve 90 Digital Forming