Filling machines Headspacer KA Vakuum machine VAKUMAT Piston filler

Automatic Headspacer KA For the setting of headspace in heat process packs. Extendable by an optional centering device to avoid sealing problems by products projecting to the pack rims. Shearing device To be used to cut filled product projecting above the container. The plates lower onto the mouths and shear off projecting products by spinning around. Option: Spring-loaded tampers with trip cams, which can be Optional: clockwise or counter-clockwise Dimensions depend of the quantity of filling stations If the spring-load is too high, the initiator releases an alarm. The corresponding jar with...

Combination with a seamer Vacuum Machine VAKUMAT To fill containers with liquid or viscous products under vacuum without overflow Machine features • While passing through the machine the packs are evacuated first, automatically switching over of the valves, the packs are then filled with product without air pockets • Consistant setting of necessary headspace • Filling without overflow means: No contamination, no foam, no waste of product, low waste water generation • Full air exhaustion of the packs prefilled with solid products. By this, an oxidation of product (discolouration, loss of vitamins)...

Piston Filler To fill cans or jars with liquid or viscous products (with or without fixed particles) Smooth filling, large and free flowing suction and filling ports, no clearance volume. Machine features • Pilot piston without seal rings, in Waukesha design • Adjustment of filling volume on each cylinder • Electrically driven height adjustment at the press of a button (pack height) • Option: Motorized height adjustment of the filling curve for fill volume control • Quick and simple modification to other pack diameters (format change) • Piston easy to remove and to clean (option: automatical...

Custom-made and customer-focused - these are the distinguishing features of NIKO's diverse product range: machines and installations for both the food and beverage industries. The product range for the drinks industry: Machines and installations for product preparation and for fruit and vegetable processing. Machines and complete installations for pasteurisation and the heating and cooling of cans, bottles and other containers. The product range for the food industry: Machines and installations for the preparation (e.g. transportation, washing, cutting, blanching), for the filling (e.g. gravimetric,...

Other services: NIKO quality. Consistent. • Technical consulting with problem analysis and conceptual design (e.g. for process line planning) and project work Only sound machines produce good products. That is why NIKO believes in consistently high quality. All machines and installations are manufactured almost exclusively from Cr-Ni steel 1.4301/AISI 304 or higher-grade stainless materials. With quality drive and bearing elements, depending on the application. • Installation and commissioning of NIKO machines as well as machines from other manufacturers • Modernisation, modifications, upgrades...