EOAT vacuum Lightweight and Compact design Compact and low profile vacuum generator for mounting directly on the end of robot arm ( P .C.D. 31.5) Height: Nozzle dia. 0.5 & 0.7㎜▶ .79" or 20mm Nozzle dia. 1.0 & 1 .2㎜▶1.1" or 28mm Vacuum generator equipped with blow-off function One air supply line enables vacuum-generating and blow-off. Blow-off air volume and duration is adjusted by a needle. No additional plumbing and wiring is needed. Realizes high-speeding suction/blow-off cycle Noises are below 75㏈[A] Nozzle dia. 0 .5 & 0 .7㎜▶ blow Nozzle dia. 1 .0 & 1 .2㎜▶ blow

Vacuum generator VYR for end of arm mounting Characteristics Nozzel dia.：0.5㎜&0.7㎜ Models A pressure sensor can be mounted （Max. 3 ports after pressure sensor installed） Air supply port Vacuum port① Vacuum port② Vacuum port③ Vacuum port④ Pressure sensor is not included. ※） + pressure sensor mounting port Vacuum port Pressure sensor mounting port ※）Pressure sensor is not included. Built-in blow-off air storage chamber Storage of blow-off air is expandable Extra storage chamber of blow-off air can be added by connecting a tubing with a plug cap Tubing (as an extra chamber) Extra storage capacity...

How it works Nozzle dia.：0.5㎜&0.7㎜ Models ■ Vacuum generating Air chamber (※1) Exhaust air Blow-off duration adjusting needle（※2） Nozzle dia.：1.0㎜&1.2㎜ Models ■ Vacuum generating ■Blowing-off Vacuum Exhaust air ※1） Blow-off release is made by the air stored in the chamber ※2） Blow-off duration adjusting needle is for adjusting air volume in the built-in chamber. Model Designation（Example） ① EOAT vacuum generator Code Tubing O.D.（㎜） 05 07 10 12 Nozzle dia. ④. Vacuum port Code Tubing O.D.（㎜） Port type ③. Nozzle diameter Code Nozzle dia.（㎜） Body height（㎜） Characteristic Rated supply pressure（MPa）...

EOAT - HML, VPRH, HS mouting face Vacuum port Vacuum port Blow-off flow rate adjusting needle Exhaust port Blow-off duration adjusting needle Silencer element ※1） Dimensions vary depending on the size and type of fittings. ※2） The weight is 66g▶ which does not include the weight of vacuum port fittings. Vacuum port Vacuum port Air chamber expansion port （M5） Pressure sensor Exhaust port （Silencer element） ※1） Dimensions vary depending on size and type of fittings. ※2）End effector can be installed on either side ※3） The weight is 131g▶ which does not

Non-standard products Products relevant to EOAT (End effectors) HS type flange for one vacuum cup or one gripper Line-up Vacuum Lifters Direct mounted vacuum cup VPRH type Spring level compensator Low dust emission spring level compensator Miniature anguler gripper Compact single acting parallel gripper Compact parallel gripper Multi-acting vacuum cups 2 types Heavy duty type Light-weight type ▶ Can accommodate up to 16 vacuum cups ▶ 2 different lengths each are offered for center framing and cup mount framing profile for flexible and functional frame assembly. ▶ The position of each vacuum cup...