VQ Series
4Pages

Catalog excerpts

Complex Vacuum Generator for Large Flow Vacuum Generator VQ Series Characteristics • 31.5-mm wide vacuum unit is designed to optimize the control of large vacuum flows. • Three different types of vacuum generator are available: single-nozzle type (nozzle bore: 1.5mm, 2.0mm), two-stage nozzle type (nozzle bore: 0.7mm, 1.0mm, 1.2mm) and twin-nozzle type. • The twin-nozzle type, the most durable unit for applications with longer suctioning or transporting time, is controlled by means of both large and small diameter nozzle. The large nozzle controls vacuum generation from start up to a prescribed reference preset pressure level, after which the small nozzle takes over for maintaining a vacuum level. This combination makes possible substantial reductions in Air consumption (patent pending). Large/Small-bore nozzle switchover setting trimmer Large-bore nozzle pilot valve Nozzle change vacuum point (can be set by user) Valve timing Blow-off pilot valve Air consumption Large-bore nozzle pilot valve Atmospheric pressure Large-bore nozzle Small-bore nozzle Blow-off air rate adjustment needle • The two-stage nozzle type's vacuum suction rate has been increased by approximately 40% compared to conventional types (PISCO Vacuum Generator complex type with single nozzle). Suction flow: • The single-nozzle type is an orthodox, complex vacuum generator designed to produce large vacuum flows. • A wide variety of valve type is standardized: · Single-nozzle type: Normally open, Normally closed, Double solenoid (vacuum retention) type · Two-stage nozzle type: Normally open, Normally closed type · Twin-nozzle type: Normally closed type · External vacuum controller: Normally open, Normally closed type • Visibility improvement by vacuum pressure sensor with 31mm size LED display.

Open the catalog to page 1

Vacuum Generator VQ Series Pressure sensor Specifications Air (JIS B 8392-1 : Compliant with [Class 1.2.1~2.4.3]) 43.5 ~ 102psi (0.3 ~ 0.7MPa) Fluid medium Operating pressure range -S (2 switch outputs with 31.5mm LED display) Operating temp. range Power requirement Operating humidity range Current consumption Vibration resistance / shock resistance Less than 50m/s² / Less than 150m/s² Pressure detection Protective structure 12 ~ 24VDC±10%, Ripple (P-P) 10% max. 40mA max. Diffused semiconduction pressure switch 147.7in. Hg (0.5MPa) Proof pressure Switch output NPN Open collector output :...

Open the catalog to page 2

Model Designation (Example) VQ T15 C (1) (1) Vacuum characteristics & Nozzle bore (3) Vacuum (V) port size (Tube O.D.) Nozzle bore Supply pressure Vacuum level High-vacuum type Single nozzle type Large-flow type High-vacuum at low air supply pressure type High-vacuum type Large-flow type Code Vacuum characteristic supply pressure type (4) Air supply (PS) port size (Tube O.D.) mm size (mm) Code Dia. * ø6 tube fitting is only selectable when 2-stage nozzle type is selected in (1). (5) Exhaust (EX) port Code Silencer vent Tube exhaust type Exhaust method – Suction flow Air consumption Tube...

Open the catalog to page 3

Vacuum Generator VQ Series The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Single nozzle type Silencer Vent Model code VQ Tube Exh. Model code Pressure sensor, Silencer Vent Model code Pressure sensor, Tube Exh. Model code VQ Model code - Model code - VQD Pressure sensor, Silencer Vent Model code VQD Pressure sensor, Tube Exh. Model code - Twin-nozzle type Silencer Vent Model code VQT Pressure sensor, Tube Exh. VQT Pressure sensor, Silencer Vent Model code Caution * : Replaced with vacuum characteristic code. * :...

Open the catalog to page 4

VQ Series 4Pages

Catalog excerpts

All NIHON PISCO CO. catalogs and technical brochures

VQ Series
4Pages