Catalogs >
NIHON PISCO CO., Ltd. >
VM | VC series

VM | VC series
28Pages

Catalog excerpts

Vacuum Generators Venturi Vacuum Generator VM, VC ■ Piping example Vacuum Generator VC VM Type (Vacuum pad Direct Mounting) bore of ø0.3 and ø0.4mm are recently added bore : ø0.3 to ø2.0mm are now available in the series ● Light-weight and compact design (Main body of large VC models with taper thread are made of aluminum) ● Low profile VC, VM Type is ideal for applications with space and weigh

Open the catalog to page 1

Model Designation (Example) VC (1) (1) Type - Pad directly mounting (2) H: High-vacuum type (Rated air supply pressure: 72.5psi (0.5MPa)) L: Large-flow type (Rated air supply pressure: 72.5psi (0.5MPa)) E: High-vacuum at Low air pressure supply type (Rated air supply pressure: 50.8psi (0.35MPa)) (3) Nozzle size * Air supply pressure is 72.5psi (0.5MPa) for H and L types or 50.8psi (0.35MPa) for E type. * The flow rate in SCFM is a reference value converted by multiplying l/min(ANR) by 0.035. Code Vacuum level and suction flow Vacuum level and suction flow Vacuum level and suction flow *1....

Open the catalog to page 2

Vacuum Generator Series Vacuum Generator VM,VC ■ Specification Fluid medium Operating pressure range Rated pressure supply Operating temp. range Pad Direct Mouting type (Nozzle dia.：ø0.3mm, ø0.4mm, ø0.5mm, ø0.7mm, ø1.0mm, ø1.2mm, ø1.5mm, ø2.0mm) Exhaust port Silencer Air supply port Push-in fitting Push-in fitting Thread (for mounting on pad) Vacuum port Vacuum port Exhaust port Silencer Thread (for mounting on pad) Vacuum port Vacuum port VC Straight (Silencer vent) Air supply port Exhaust port Silencer Thread (for mounting on pad) Push-in fitting Vacuum port VC Straight (Silencer vent)...

Open the catalog to page 3

http: //www.pisco.com Pad Direct Mounting Type VC Pad Direct Mounting Straight Pad Direct Mounting Elbow -V·P VM -V·PU VM Pad Direct Mounting Elbow VMH03-M53 VMH05-U105/32U -V·PU -V·P VC VC Pad Direct Mounting Straight VCH03-M53 VCH05-U105/32U

Open the catalog to page 4

Model Model Model Model Model Model Pad Direct Pad Direct -V·PCJ-S3 Mounting Elbow VC -V·PCJ VC -V·PCJ VC -V·PLJ VC -V·PLJ VC Mounting Straight VC -V·PLJ-S3 VCH07-016CJ *1. The white-letter model type in ■ is new model. *2. "-S3" spec.: no Cu alloy with HNBR seal *3. The model with low sales average may be build to order production. For details, please contact Pisco USA.

Open the catalog to page 5

Vacuum Generator Series Vacuum Generator VM,VC Element for Vacuum Generators VC07, 10, 12 Type VC15, 20 Type Vacuum Generator Model Vacuum Generator Silencer Element Silencer Element Silencer Element Silencer Element

Open the catalog to page 6

http: // www.pisco.com ■ Characteristics Supply pressure - Final vacuum / Suction Flow / Air Consumption VMH05, VML05, VCH05, VCL05 Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Pressure supply：0.5MPa (H, L type) 0.35MPa (E type) Flow characteristics H type ﬁnal vacuum Flow rate (l/min(ANR)) Vacuum characteristics Pressure supply：0.5MPa (H, L type) 0.35MPa (E type) Pressure supply：0.5MPa (H type) 0.35MPa (E type) Flow characteristics Flow characteristics Vacuum characteristics Flow rate (l/min(ANR)) H type suction ﬂow E type suction ﬂow 20 Vacuum characteristics...

Open the catalog to page 7

■ Characteristics Evacuation time (Supply pressure H and L types: 0.5MPa, E type: 0.3 to 0.5Mpa) ※ The following charts are for reference only since the values vary according to the piping arrangement.

Open the catalog to page 8

Suction flow Flow rate (l/min[ANR]) Evacuation time Flow characteristics Evacuation time (msec) Vacuum characteristics Evacuation time Evacuation time (msec) –100 Flore rate (l/min[ANR]) Flow characteristics Vacuum characteristics Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min[ANR]) Flow characteristics 10 Control flow 3/8 1400 Evacuation time 1200 Evacuation time (msec) Union Straight type Suction flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) –90 Evacuation time (msec) Evacuation time –100 Flow rate (l/min[ANR]) –80 Control flow –70 100 –60 Fin Flow rate (l/min(ANR))...

Open the catalog to page 10

Flow rate (l/min(A Vacuum Generator Series Vacuum Generator VM,VC VM Pad Direct Mounting Type Elbow (Silencer vent) Nozzle dia.：ø0.3, ø0.4mm Nozzle Final vacuum Suction flow Consumption Weight bore (mm) (-kPa) (ℓ/min[ANR]) (ℓ/min[ANR]) (g) Pad Direct Mounting Type Straight (Silencer vent) 16 C Final vacuum Suction flow Consumption Weight (-kPa) (ℓ/min[ANR]) (ℓ/min[ANR]) (g) 2 90

Open the catalog to page 11

Pad Direct Mounting Type Straight (Silencer vent) Model code Nozzle Final vacuum suction flow Consumption bore

Open the catalog to page 12

http: //www.pisco.com Pad Direct Mounting Type Straight (Tubing exhaust) B Nozzle Final vacuum suction flow Consumption Weight bore ※ “L21” and “L3” are reference dimensions after tightening the taper thread. ※ Add “-S3” at the end of model code for “Copper alloy free” .

Open the catalog to page 13

Vacuum Generator VM,VC VC Pad Direct Mounting Type Elbow (Silencer vent) E1 E2 P øP1 Final vacuum Suction flow Consumption Weight

Open the catalog to page 14

http: //www.pisco.com Pad Direct Mounting Type Elbow (Tubing exhaust) E1 E2 ※ “L21” and “L3” are reference dimensions after tightening the taper thread. ※ Add “-S3” at the end of model code for “Copper alloy free” . Unitmm Nozzle Final vacuum Suction flow Consumpti

Open the catalog to page 15

Vacuum Generator Series Vacuum Generator VM,VC VC Pad Direct Mounting Type Straight (Silencer vent) B Nozzle Final vacuum suction flow Consumption bore

Open the catalog to page 16

http: //www.pisco.com Pad Direct Mounting Type Straight (Tubing exhaust) B Copper alloy free Selectable ※ “L21” and “L3” are reference dimensions after tightening the taper thread. ※ Add “-S3” at the end of model code for “Copper alloy free” . Nozzle Final vacuum suction flow Consumption Weight bore

Open the catalog to page 17

Vacuum Generator Series Vacuum Generator VM,VC VC Pad Direct Mounting Type Elbow (Silencer vent) E1 øD Nozzle Final vacuum Suction flow Consumption Weight bore

Open the catalog to page 18

http: //www.pisco.com Pad Direct Mounting Type Elbow (Tubing exhaust) E1 E2 Copper alloy free Selectable ※ “L21” and “L3” are reference dimensions after tightening the taper thread. ※ Add “-S3” at the end of model code for “Copper alloy free” . (mm) (-kPa) (ℓ/min[ANR]) (ℓ/min[ANR]) (g) file 0.7 Unit：mm Nozzle Final vacuum Suction flow Consumption Weight bore

Open the catalog to page 19

VM | VC series 28Pages

Catalog excerpts

All NIHON PISCO CO. catalogs and technical brochures

VM | VC series
28Pages