Website:
NIHON PISCO CO., Ltd.
Group: 株式会社日本ピスコ
Catalog excerpts
VACUUM ACCESSORIES Vacuum Blow-off Control Valve equipped with Blow-off Air & Pressure adjusting needles Add-on Blow-off Controller Vacuum Pad Vacuum generator Vacuum air Blow-off air Blow-off pressure adjustment needle Add-on Blow off Controller is for Vacuum air vacuum generators with vacuum Blow-off air blow-off function and controls (controlled flow) Blow-off air rate blow-off air while maintaining adjustment needle characteristics of vacuum Blow-off pressure adjustment needle generators. ● Blow-off pressure control Blow-off flow control Blow-off air rate adjustment needle Newly added pressure Add-on Blow off Controller control function prevents work-pieces from being blown off. ● Relief function releases unnecessary air and shortens blow-off response time by attaching Add-on Blow-off Controller near Vacuum Pad. Blow-off air Vacuum Pad ※”Blow-off air” is for releasing work-piece from vacuum pad. Prevent work-piece from being blown-off Tiny and light work-piece Rotatable body and fitting make it easy to connect or disconnect tube in any direction. Add-on Blow-off Controller Vacuum Filter Free Holder Fall Prevention Valve 8mm LED Pressure Sensor LED Pressure Sensor Small Sensor Pressure Sensor Wit
Open the catalog to page 1
Vacuum Accessories Series VACUUM ACCESSORIES EXTERNAL VACUUM VACUUM CONTROLLER GENERATOR Add-on Blow-off Controller ■ Model Designation (Example) VLF Add-on Blow-off Controller ① VR port size (Vacuum generator side) ② W port size (Work-piece side) ① VR port size (Vacuum generator side) 4 ø4mm Code Port size ② W port size (Work-piece side) Push-In Fitting Joint type Code Port size Taper pipe thread 01 R1/8 ■ Specifications Fluid medium Operating pressure range Setting range of relief valve operating pressure Operating vacuum pressure 751 Small Vacuum Regulator Add-on Blow-off Controller...
Open the catalog to page 2
■ How to insert and disconnect 1. How to insert and disconnect tubes (Push-In Fitting) ① Tube insertion Insert a tube into Push-In Fitting up to the tube end. Lock-claws bite the tube and fix it automatically, then the elastic sleeve seals around the tube. Refer to “2. Instructions for Tube Insertion” under “Common Safety Instructions for Fittings” . ② Tube disconnection Make sure to stop air supply before the tube disconnection. VACUUM ACCESSORIES The tube is disconnected by pushing release-ring to release Lock-claws. 2. How to tighten thread Tighten the hexagonal-column with a proper tool...
Open the catalog to page 3
Vacuum Accessories Series ■ Characteristics Flow rate characteristics of blow-off air 25 Setting pressure of vacuum generator：0.7MPa Blow-off air rate：60l/min[ANR] Flow rate (l/min[ANR]) VACUUM ACCESSORIES EXTERNAL VACUUM VACUUM CONTROLLER GENERATOR Add-on Blow-off Controller Setting pressure of vacuum generator：0.5MPa Blow-off air rate：47l/min[ANR] 15 Setting pressure of vacuum generator：0.3MPa Blow-off air rate：30l/min[ANR] Number of rotations of Blow-off air rate adjustment needle Pressure characteristics of brow-off air (Pressure supply: 0.5MPa, Tube length: 100mm) 0.025 Small Vacuum...
Open the catalog to page 4
Detailed Safety Instructions Before using PISCO products, be sure to read “Safety Instructions” and “Safety Instruction Manual” on page 35-39 and “Common Safety Instructions for Vacuum Series” on page 47-49. Warning 1. Since Add-on Blow-off Controller has an installing direction, please read the catalog thoroughly and confirm before using it. There is a possibility of personal injury or product damage by installing the product in a wrong way. 2. Only air can be used as a fluid medium. Contact us when any other fluid is used. 3. Avoid an excessive tensile force, twisting force, bending,...
Open the catalog to page 5
Vacuum Accessories Series VLF VR port (Vacuum generator side): Push-In Fitting / W port Relief port VR port Blow-off pressure adjustment needle Blow-off air rate adjustment needle VACUUM ACCESSORIES Weight CAD (g) file name VLF VR port (Vacuum generator side): Push-In Fitting / compliant Blow-off air rate adjustment needle Add-on Blow-off Controller Blow-off pressure adjustment needle Weight CAD (g) file name Chart Characteristic chart page Relief port Small Vacuum Regulator W port (Work-piece side): Taper Pipe Thread W port (Work-piece side): Push-In Fitting EXTERNAL VACUUM VACUUM...
Open the catalog to page 6
■ How to adjust Add-on Blow-off Controller 1. Connect VR port with vacuum generator side and W port with work-piece side. Fully open the blow-off pressure adjustment needle ① and fully close the for blow-off air rate adjustment needle ② . 2. Start the operation of vacuum generator and gradually close the needle ① to adjust the required vacuum condition. Make sure there is no vacuum startup delay. Repeat generating vacuum several times to check the operation goes smoothly. 3. Open the needle ② gradually to supply the proper blow-off air rate. VR port (Vacuum generator side) ② Blow-off air...
Open the catalog to page 7
Vacuum Accessories Series VACUUM ACCESSORIES EXTERNAL VACUUM VACUUM CONTROLLER GENERATOR Add-on Blow-off Controller 757 Small Vacuum Regulator Add-on Blow-off Controller
Open the catalog to page 8
Safety Instructions SAFETY Instructions This safety instructions aim to prevent personal injury and damage to properties by requiring proper use of PISCO products. Be certain to follow ISO 4414 and JIS B 8370 ISO 4414Pneumatic fluid power…Recomendations for the application of equipment to transmission and control systems. JIS B 8370General rules and safety requirements for systems and their components. This safety instructions is classified into “Danger”, “Warning” and “Caution” depending on the degree of danger or damages caused by improper use of PISCO products. Danger Hazardous...
Open the catalog to page 9
http://www.pisco.co.jp http://www.pisco.co.jp Disclaimer 1. PISCO does not take any responsibility for any incidental or indirect loss, such as production line stop, interruption of business, loss of benefits, personal injury, etc., caused by any failure on use or application of PISCO products. 2. PISCO does not take any responsibility for any loss caused by natural disasters, fires not related to PISCO products, acts by third parties, and intentional or accidental damages of PISCO products due to incorrect usage. 3. PISCO does not take any responsibility for any loss caused by improper...
Open the catalog to page 10All NIHON PISCO CO. catalogs and technical brochures
-
CTB series1 Pages
-
FUS8 series3 Pages
-
31 & 32 Series20 Pages
-
Vacuum Pad Soft Series86 Pages
-
VP series106 Pages
-
CHA series8 Pages
-
Gripper Series15 Pages
-
SVB Series50 Pages
-
SVA series13 Pages
-
SVR series31 Pages
-
NSB series8 Pages
-
Ball Valve SUS304 series8 Pages
-
BV series8 Pages
-
HV series5 Pages
-
Cable clamp & Dividing sheet8 Pages
-
Plarailchain SC15 Pages
-
Plarailchain SPO12 Pages
-
Plarailchain SP14 Pages
-
HPO12 Pages
-
HPU12 Pages
-
PJN series15 Pages
-
KJNC series15 Pages
-
SSJS series6 Pages
-
Flow Control Valve PP Series12 Pages
-
Stainless SUS31613 Pages
-
UE series12 Pages
-
FB series1 Pages
-
CTA series1 Pages
-
SFTN series2 Pages
-
SET series1 Pages
-
SFT series14 Pages
-
ULF series12 Pages
-
UCQ series2 Pages
-
UQ series12 Pages
-
NB series12 Pages
-
NA series12 Pages
-
UD series12 Pages
-
UBS series12 Pages
-
UBT series12 Pages
-
UC series1 Pages
-
UB series12 Pages
-
AK/AS series26 Pages
-
NK series18 Pages
-
Brass Series30 Pages
-
V-0 series27 Pages
-
EG Series27 Pages
-
PP Fitting series12 Pages
-
PP Series26 Pages
-
AP series18 Pages
-
SL series16 Pages
-
P-SUS series33 Pages
-
NS series24 Pages
-
SSP series8 Pages
-
ATS series6 Pages
-
Air Filter20 Pages
-
Combination Unit Series25 Pages
-
SFU series9 Pages
-
JP series15 Pages
-
ET series11 Pages
-
EQ series19 Pages
-
CVLU series21 Pages
-
CV series24 Pages
-
JN series25 Pages
-
Speed Controller Constant Flow15 Pages
-
JSD series10 Pages
-
JS Low-Flow series17 Pages
-
JSC series13 Pages
-
JS series30 Pages
-
Miniature Pressure Regulator12 Pages
-
MA series16 Pages
-
RH series16 Pages
-
R series16 Pages
-
PS series16 Pages
-
L series41 Pages
-
FUS207 Pages
-
Small Flow Sensor FUS8 Sries3 Pages
-
GP series13 Pages
-
VUS-32. SEU-32 Series1 Pages
-
Small Pressure Sensor 11-series24 Pages
-
VUS12 series2 Pages
-
VUS21 series14 Pages
-
VUS8-S series22 Pages
-
JSD series10 Pages
-
Orifice Fitting Series6 Pages
-
JK series10 Pages
-
RVFUP series6 Pages
-
VFL series8 Pages
-
VF series22 Pages
-
ECV series8 Pages
-
VPLFC, VPLFD series17 Pages
-
VPKE series4 Pages
-
RPV06 Series8 Pages
-
VZ Series34 Pages
-
VX Series42 Pages
-
VQ Series4 Pages
-
VN Series40 Pages
-
VK series53 Pages
-
VJ Series34 Pages
-
VG series21 Pages
-
VRL series17 Pages
-
VVV series11 Pages
-
VLS series4 Pages
-
VM | VC series28 Pages
-
VY series24 Pages
-
VB series11 Pages
-
VH | VS series28 Pages
-
VPHMP series12 Pages
-
VYR series5 Pages
-
HS series13 Pages
-
HML series14 Pages
-
VRG series18 Pages
-
Dry Unit Series33 Pages
-
Fiber Membrane Air Dryer12 Pages
-
VLM series12 Pages
-
VSPE series5 Pages
-
VT series21 Pages
-
PB series13 Pages
-
JSG series17 Pages
-
pararel3 Pages
-
fitting4 Pages
-
BJSU series4 Pages
-
SC15 Pages
-
SPO12 Pages
-
SP13 Pages
-
RPV pump8 Pages
-
Pre-set6 Pages
-
Stainless Steel Ball Valve8 Pages
-
SUS316 Flow Control Valve6 Pages
-
Flange13 Pages
-
HML14 Pages
-
End of Arm Vacuum Gripper12 Pages
-
VYR5 Pages
-
EOAT VRG | VMG series18 Pages
-
VPLFC17 Pages
-
SVB172 Pages
-
SVR39 Pages
-
8mm Sensor22 Pages
-
Vacuum Filter28 Pages
-
Fall Prevention18 Pages
-
Vacuum Pen21 Pages
-
Push-Rod Release4 Pages
-
cylinder22 Pages
-
FDAbellows6 Pages
-
Oval80 Pages
-
sponge50 Pages
-
mark-free34 Pages
-
flat42 Pages
-
Ultrathin34 Pages
-
packaging bag13 Pages
-
multi-bellow46 Pages
-
bellows pad74 Pages
-
Skid proof pad42 Pages
-
soft bellow pad60 Pages
-
soft pad66 Pages
-
VRL17 Pages
-
VH VS VC VUM VU VY VB336 Pages
-
VZ34 Pages
-
VX42 Pages
-
VVV11 Pages
-
VQ42 Pages
-
VN40 Pages
-
VLS4 Pages
-
VLM12 Pages
-
VK53 Pages
-
VJ34 Pages
-
VG21 Pages
-
Vacuum Tube12 Pages
-
Twin Coiling12 Pages
-
Tube Cutter12 Pages
-
Polyurethane Tube12 Pages
-
Nylon Tube Series12 Pages
-
Multi-core Planar Tube12 Pages
-
Low-Friction Polyurethane Tube12 Pages
-
Insert Ring12 Pages
-
Fluororesin (PFA) Tube14 Pages
-
UL series12 Pages
-
Anti-spatter Tube12 Pages
-
Tube Fitting PP Series26 Pages
-
Tube Fitting Mini Series41 Pages
-
Tube Fitting Chemical Series18 Pages
-
K series30 Pages
-
Stop Fitting Series16 Pages
-
Rotary Joint Series16 Pages
-
Multi-Circuit Rotary Block12 Pages
-
Minimal Fitting Series20 Pages
-
Main Block Series24 Pages
-
Light Coupling Series24 Pages
-
High Rotary Joint Series16 Pages
-
Connector Series16 Pages
-
Color Cap12 Pages
-
Brass Compression Fitting Series18 Pages
-
2-Circuit Junction Block Series16 Pages
-
Vacuum EOAT Kit HML14 Pages
-
Vacduum gripper18 Pages
-
Mounting Flange for EOAT.pdf13 Pages
-
SSNC series13 Pages
-
SJSC series24 Pages
-
Speed Controller Series32 Pages
-
Speed Controller PP Series17 Pages
-
Speed Controller Low Flow17 Pages
-
Speed Controller High Flow13 Pages
-
Speed Controller Brass Series15 Pages
-
KJSC series17 Pages
-
Silencer Series13 Pages
-
Quick Exhaust Valve Series19 Pages
-
Pressure Gauge Series13 Pages
-
Miniture quick-exhaust17 Pages
-
Fixed Orifice Joint Series22 Pages
-
Check Valve4 Pages
-
SUS304_Ball Valve Series8 Pages
-
Parallel Gripper6 Pages
-
JSG17 Pages
-
GENERAL106 Pages
-
Mechanical Valve Series19 Pages
-
Ball Valve Series19 Pages
-
Stainless Steel ball valve6 Pages
-
Hand Valve Series15 Pages
-
Change Valve11 Pages
-
SVA21 Series21 Pages
-
P Series71 Pages
-
SVA20 Series43 Pages
-
RegulatorPL031821m12 Pages
-
BJSU series6 Pages
-
NP68-01e17 Pages
