VK
53Pages

Catalog excerpts

VACUUM EXTERNAL VACUUM GENERATOR CONTROLLER VACUUM PAD VACUUM ACCESSORIES Complex Vacuum Generator with Variety of Mounting Units for Different Applications Vacuum Generator of the most suitable module for your application is possible by the modularized each unit and rich combination of units. Plug ④Mechanical vacuum switch ⑤Vacuum switch with LED display ⑥Air timer type blow-oﬀ valve ⑦Blow-oﬀ solenoid valve ②Ejector ③Suction solenoid valve Combinations ① Filter + ② Ejector ③ Suction solenoid valve Check valve (vacuum retention function) ④ Mechanical vacuum switch ⑤ Vacuum switch with LED display ⑥ Air timer type blow-off valve ⑦ Blow-off solenoid valve

Open the catalog to page 1

Vacuum Generator Series VACUUM GENERATOR Vacuum Generator VK ■ Characteristics Mechanism can be selectable from solenoid valve type and air timer type. The built-in switching valve realizes fine tuning of quick blow-off air and fine adjustment of air rate. maintenance by a lock-on manual button. vacuum sensor selections: LED display Type and Mechanical Type which is reasonable and user-friendly. LED display is used for LED digital pressure sensor to enhance visibility. types of vacuum switch : 2 switch output, 1 switch output with 1 analog output are available depending on the desired...

Open the catalog to page 2

① Filter Dusts sucked up from a vacuum pad are filtered and blocked from entering inside the vacuum generator. ② Blow-off air rate adjustment needle Turning the release needle to right (clockwise direction) reduces blowoff air and turning it to left (counterclockwise) increases blow-off air. ③ Vacuum Filter Dusts and water drops exhausted from the vacuum generator are filtered. ④ Filter / Regulator ⑤ Vacuum Sensor with LED display ⑥ Blow-off Solenoid Valve (R) The solenoid valve functions to release a work-piece from a vacuum pad. (Blow-off air is generated during the electric power supply)...

Open the catalog to page 3

Vacuum Generator Series VACUUM GENERATOR Vacuum Generator VK ■ Model Designation (Example) VK Complex Vacuum Generator ⑪ Vacuum switch ⑩ No. of stations ⑨ Body color ⑧ Solenoid valve type ⑦ Exhaust port ⑥ Air supply port Code Code Code A B Stand-alone type with double side port Stand-alone type with single side port M Manifold type ② Vacuum characteristics Code Code Performance Performance Code Performance Large-flow type High-vacuum type High-vacuum at low air supply pressure type H L E （Rated supply pressure：0.5MPa）（Rated supply pressure：0.5MPa）（Rated supply pressure：0.35MPa） No code...

Open the catalog to page 4

⑥ Air supply port (tube dia.) Code Tube dia.(mm) Code Tube dia.(mm) ※ . ø4mm (code: 04) is selectable for Nozzle Bore 0.5mm and 0.7mm only. Port position Side (Straight) Top (Straight) Code S5/32 S1/4 S5/16 PP T5/32 T1/4 T5/16 Tube dia.(mm) ø3.97 ø6.35 ø7.94 Plug ø3.97 ø6.35 ø7.94 00：Applicable to a manifold installation top-mounting unit alone, with the port to be installed on the side and to model code for manifold-base alone with different vacuum port size. ※1. ø4mm (code: 04) is selectable for Nozzle Bore 0.5mm and 0.7mm only. ※2. Refer to the Manifold Type reference picture to select...

Open the catalog to page 5

Vacuum Generator Series VACUUM GENERATOR Vacuum Generator VK ■ Model Designation of Block Plate (Example) VKM ② Color ① Block plate Manifold for complex vacuum generator ① Block plate：MB ② Color W Light-gray Code Color ■ Model Designation of Nozzle Set (Example) VK Complex vacuum generator ① Complex vacuum generator Code H Vacuum characteristics Code Vacuum characteristics Code Vacuum characteristics High-vacuum type Large-flow type High-vacuum at low air supply pressure type L E （Rated supply pressure：0.5MPa）（Rated supply pressure：0.5MPa）（Rated supply pressure：0.35MPa） ※ E type does not...

Open the catalog to page 6

type (VKM) .When all stations have common speciﬁcations. VACUUM ACCESSORIES ① Port orientation：M → Manifold ② Vacuum characteristics：H → High-vacuum type ③ Nozzle bore：10 → ø1.0mm ④ Combinations：W → Filter, Suction solenoid valve, Vacuum switch with LED display and Blow-off solenoid valve ⑤ Vacuum port：T6 → ø6mm Push-In Fitting on top ⑥ Air supply port：20 → ø10mm Push-In Fittings on both sides of manifold ⑦ Exhaust port：S2 → Silencers on both sides of manifold ⑧ Solenoid valve type：E → Normally closed (N.C) type 24VDC ⑨ Color：B → Black ⑩ No. of stations：04 → 4 stations ⑪ Switch output：NW →...

Open the catalog to page 7

Vacuum Generator Series VACUUM GENERATOR Vacuum Generator VK ■ Order Example ■ Manifold-base only (Block plate not attaching to the top unit) .When all vacuum ports are common speciﬁcations ① Port orientation：M → Manifold type ⑤ Vacuum port：S6 → ø6mm Push-In Fitting for each of 8 stations ⑥ Air supply port：48 → R side only, ø8mm Push-In Fitting (Elbow) ⑦ Exhaust port：62 → L side only, ø12mm Push-In Fitting (Elbow) ⑨ Color：W → Light-gray ⑩ No. of stations：08 → 8 stations .When the vacuum ports differ even by one (Fill out the Speciﬁcation Order Form on page 128) ① Port orientation：M →...

Open the catalog to page 8

of model code when manifold installation top-mounting units and vacuum port vary in type, while stations of the manifold type (VKM) are aligned ( ❶ and ❷ are examples of model designation. Also ﬁll in ❸ (Speciﬁcation Order Form) which indicates station arrangements for manifold installation top-mounting unit and vacuum port.) ❶ Model code and number of units when ordering manifold VK M – 00 48 62 – W 08 ・・・・・・・ only 1 unit ※ See the Speciﬁcation Order Form Example 3 for manifold only VACUUM EXTERNAL VACUUM GENERATOR CONTROLLER ❷ Model code and number of units of manifold installation...

Open the catalog to page 9

Vacuum Generator Series VACUUM GENERATOR Vacuum Generator VK ■ Instructions for Specification order form (1) In case of manifold installation top-mounting unit example 1) and 2) of ❷ “Model code and number of units of manifold installation top-mounting unit”, ⑤ “Vacuum port” is “00” which indicates ports on sides, but does not show the tube dia. of ﬁttings. Tube dia. of the ﬁtting should be designated by ❸ “Speciﬁcation Order Form”. Therefore, there may be a difference in format style between the model code in ❷ and ❸ ” Speciﬁcation order form” as to the Vacuum port space ⑤ . (2) Station...

Open the catalog to page 10

VK 53Pages

Catalog excerpts

All NIHON PISCO CO. catalogs and technical brochures

VK
53Pages