Catalogs >
NIHON PISCO CO., Ltd. >
Stainless SUS316

Stainless SUS316
13Pages

Catalog excerpts

CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Throttle (Needle) Valve of Stainless SUS316 Throttle (Needle) Valve Copper alloy Non- Clean-room free material grease packaging option Chemical Industry Medical Industry Medicine Industry Food Industry Resistance SUS316 for All Metal Parts. ● FKM for Fluid medium of Air, Water, Medicals and Mixed Gasses. for All Parts and Compliant with Japanese Food Sanitation Act. Stainless Series PP Series Anti-spatter Series Quick Exhaust Valve Series Exhaust Valve Series Fixed orifice Series Pressure Control er Series Pressure Gauge Series Check Valve Series Silencer S

Open the catalog to page 1

Controller Series Throttle (Needle) Valve ■ Model Designation (Example) SSN Throttle (Needle) Valve Stainless SUS316 ④ Thread sealing option Type: Elbow only ② Thread size Thread size Taper pipe thread 　No code：Oil-free (fluorine coating on elastic sleeve) 461 　X：Fluoriated synthetic grease on seal rubber (FKM) Speed Controller Series ④ Thread sealing option (Taper thread only) Stainless Series PP Series Anti-spatter Series Constant Flow Series Throttle (Needle) Valve Series Stainless Series 　No code：Standard (No Sealock and seal tape) 　TP：Seal tape on thread ⑤ Packaging option

Open the catalog to page 2

■ Specifications Fluid medium Air / Water / Other chemicals (※1) Operating temp. range VALVE TUBE Warning ※ 1. The specification above may not be applied, depending on the kind of chemicals or mixed gases used as a fluid medium. Make sure to use PISCO products after verifying their suitability on the userside. ※ 2. When the fluid medium is liquid, placing Insert Ring into the tube. Operating pressure range MAKE-TO-ORDER PRODUCTS ■ Construction Symbol Tube End Needle (SUS316) Locknut (SUS316) Metallic body (SUS316) Elastic sleeve (FKM, fluorine coating) Plate (SUS316) Collet (SUS316)...

Open the catalog to page 3

Controller Series Throttle (Needle) Valve Before using PISCO products, be sure to read “Safety Instructions” and “Safety Instruction Detailed Safety Instructions 1. When using chemicals as a fluid medium, be sure to contact us first. Depending on conditions, Manual” on page 23 to 27 and “Common Safety Instructions for Controllers” on page 367 to 368. Warning it may cause damage to the fittings, the escape of tubes and a fluid leakage. 2. Be sure to place Insert Ring into the tube edge when the fluid is liquid. There is a possibility to cause the escape of tube and a fluid leakage without...

Open the catalog to page 4

■ How to insert and disconnect 1. How to insert and disconnect tubes CONTROLLER ① Tube insertion 　Insert a tube into Push-In Fitting up to the tube end. Collet fixes the tube automatically and the elastic sleeve seals around the tube. 　Refer to “2. Instructions for Tube Insertion” under “Common Safety Instructions ② Tube disconnection 　The tube is disconnected by pushing collet. 　Make sure to stop air supply before the tube disconnection. MAKE-TO-ORDER PRODUCTS 2. How to tighten thread ① Tightening thread 　Use a spanner to tighten a hexagonal-column. 　Refer to “Table: Recommended tightening...

Open the catalog to page 5

Controller Series Stainless SUS316 SSNC Elbow Throttle (Needle) Valve Hex. Weight CAD (g) file name H ※ 1. “L1” and “L2” are reference values for height dimensions after tightening thread. ※ 2. ③ in Model code / Replaced with “X” for Fluorinated synthetic greases ※ 3. ④ in Model code / Replaced with “TP” for Seal tape ※ 4. ⑤ in Model code / Replaced with “C” for Clean-room package 3D 3D CAD data is available at PISCO website. CAD Flow rate (l/min(ANR)) Control flow Control flow Control flow Control flow CAD CAD data is available at PISCO website. Stainless Series Throttle (Needle) Valve...

Open the catalog to page 6

Safety Instructions SAFETY Instructions 　This safety instructions aim to prevent personal injury and damage to properties by requiring proper use of PISCO products. 　Be certain to follow ISO 4414 and JIS B 8370 ISO 4414Pneumatic fluid power…Recomendations for the application of equipment to transmission and control systems. JIS B 8370General rules and safety requirements for systems and their components. This safety instructions is classified into “Danger”, “Warning” and “Caution” depending on the degree of danger or damages caused by improper use of PISCO products. Danger Hazardous...

Open the catalog to page 7

http://www.pisco.co.jp http://www.pisco.co.jp Disclaimer 1. PISCO does not take any responsibility for any incidental or indirect loss, such as production line stop, interruption of business, loss of benefits, personal injury, etc., caused by any failure on use or application of PISCO products. 2. PISCO does not take any responsibility for any loss caused by natural disasters, fires not related to PISCO products, acts by third parties, and intentional or accidental damages of PISCO products due to incorrect usage. 3. PISCO does not take any responsibility for any loss caused by improper...

Open the catalog to page 8

Safety Instructions SAFETY INSTRUCTION MANUAL PISCO products are designed and manufactured for use in general industrial machines. Be sure to read and follow the instructions below. 1. Do not use PISCO products for the following applications. ① Equipment used for maintaining / handling human life and body. ② Equipment used for moving / transporting human. ③ Equipment specifically used for safety purposes. 1. Do not use PISCO products under the following conditions. ① Beyond the specifications or conditions stated in the catalog, or the instructions. ② Under the direct sunlight or outdoors....

Open the catalog to page 9

http://www.pisco.co.jp http://www.pisco.co.jp 1. Remove dusts or drain before piping. They may get into the peripheral machine / facilities and cause malfunction. 2. When inserting an ultra-soft tube into push-in fitting, make sure to place an Insert Ring into the tube edge. There is a risk of causing the escape of tube and a fluid leakage without using an Insert Ring. 3. The product incorporating NBR as seal rubber material has a risk of malfunction caused by ozone crack. Ozone exists in high concentrations in static elimination air, clean-room, and near the high-voltage motors, etc. As a...

Open the catalog to page 10

Stainless SUS316 13Pages

Catalog excerpts

All NIHON PISCO CO. catalogs and technical brochures

Stainless SUS316
13Pages