Catalogs >
NIHON PISCO CO., Ltd. >
Stainless Steel ball valve

Stainless Steel ball valve
6Pages

Catalog excerpts

Valve made of Stainless steel suitable to use with chemical and mixed gases Stainless Steel ball valve Use SUS316 equivalent (SUS316 or CF8M) as material. Stem for fixing the handle will not come off the valve body. ▶ Prevent stem come-off from valve body. No restriction for flow direction. ▶ IN/OUT flow can be connected to both side of valve. Alkaline cleaner to clean ( *Not completely oil-free) Stainless ball valve Cleaning Specification.

Open the catalog to page 1

2017 New Products Stainless steel ball valve Model Designation (Example) ② . Female thread Size Code Size ①. Construction Code 10 Construction 1 piece, reduced bore 30 3 pieces, full bore Stainless Steel Ball Valve Female thread type Specification Fluid medium Max. operating pressure （*2） Max. Vacuum Operating temp. range (*2) Air, Inert gas such as Nitrogen/ Helium (no toxic), Water/ Liquid（*1）, Other（*1） 5.5MPa (NSBVF10), 6.9MPa (NSBVF30) -101kPa -29 ~ + 232°C (No Freezing of liquid) ⚠ Warnings　*1. Conditions when fluid medium is liquid or chemical. 1. Surge pressure must be controlled...

Open the catalog to page 2

Safety instruction manual Warnings 1.Check chemical resistance before using the products, when the fluid medium is chemicals, solvent or mixed gases. Damage or leakage may occur to the valve upon the usage conditions. 2.Do not use the valve for applications which cause shake or shock as may lead to valve damage or leakage. 3.Use soapy water or other method to ensure there is no leakage before use. 4.After the installation, carry out leakage check and maintenance periodically, considering environment including use frequency, temperature, fluid flowrate, pressure, fluid medium, etc. There is...

Open the catalog to page 3

2017 New Products Stainless steel ball valve Appearance drawing Model code

Open the catalog to page 4

Transportation • Storage ・Turn the valve handle to the fully open position when transport or store otherwise it may lead to ball seat deformation. ・Store the valve indoor, avoiding dust and foreign matter. ・To prevent from dust and foreign mater, do not unwrap packaging before installation. Installation ・Before installation, use air blow or water to clean valve internal. ・IN/OUT flow can be connected to both side of valve. Choose side which is easy to install and operate. ・Consider the load from the piping when installing valve. ・Follow the tightening torque for tube fitting. ・Consider...

Open the catalog to page 5