CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Flame-Retardant Spatter-proof Speed Controller Speed Controller Anti-spatter Anti-spatter Anti-spatter Series ● Adopting ● Protective ● Effective Cover to Protect from Sparks. Combination with Anti-spatter Tube. Constant Flow Series Throttle (Needle) Valve Series Stainless Series PP Series Anti-spatter Series Quick Exhaust Valve Series Exhaust Valve Series Fixed orifice Series Pressure Control er Series Pressure Gauge Series Check Valve Series Silencer Ser

Controller Series Speed Controller ■ Model Designation (Example) JS Speed Controller ※ Model code without V-O is regarded as Speed Controller Series (P.372). Type: C (Elbow) only ④ Check valve specification ② Thread size Thread size Metric thread　(mm) Taper pipe thread　 ③ Control direction Code 423 Speed Controller Series Control direction ■ Air from thread side is controlled. Air from tube side ■ Air from tube side is controlled. Air from thread side is not controlled and flows out from thread side. is not controlled and flows out from tube side. Solenoid valve Stainless Series Single-acting...

■ Specifications Fluid medium Check valve cracking pressure Operating pressure range Operating temp. range Cover (Flame-retardant resin) Needle (Nickel-plated brass) Elastic sleeve (NBR) Lock-claws (Stainless steel) Release ring (Flame-retardant resin) Metallic body (Nickel-plated brass) Anti-spatter Tube MAKE-TO-ORDER PRODUCTS Locknut (Aluminum) O-ring (NBR) Cover (Flame-retardant resin) Resin body (Flame-retardant resin) Guide ring (Nickel-plated brass) Taper pipe thread: Sealock- coating Metric thread: With gasket (SPCC+NBR) Detailed Safety Instructions Before using PISCO products, be sure...

Controller Series Speed Controller ■ How to adjust the speed 1. Speed adjustment of actuators ① Increasing speed clockwise direction direction from a fully closed state. The more too fast. Make sure moves. Make sure to The speed setting can be changed without tightening the locknut. 425 Speed Controller Series Stainless Series PP Series Anti-spatter Series ■ How to attach and detach cover 1. Cover attachment and detachment ① Cover detachment 　Pinch the cover and pull 　Push the cover down it up while swinging it right and left as the right figure shows.

■ How to insert and disconnect 1. How to insert and disconnect tubes CONTROLLER ① .Tube insertion 　Insert a tube into Push-In Fitting up to the tube end. Lock-claws bite the tube and fix it automatically, then the elastic sleeve seals around the tube. 　Refer to “2. Instructions for Insertion” under “Common Safety Instructions for ② .Tube disconnection 　The tube is disconnected by pushing release-ring to release Lock-claws. 　Make sure to stop air supply before the tube disconnection. MAKE-TO-ORDER PRODUCTS 2. How to tighten thread ① .Tightening thread 　Use a spanner to tighten a hexagonal-column....

Controller Series Anti-spatter Stainless Series PP Series Metric thread type A Speed Controller Series Tube O.D. Tube O.D. Model code øD1 øD2 Speed Controller ※ “L1” and “L2” are reference values for height dimensions after tightening taper thread. ※ □ in Model code / Replaced with ” A” for Meter-out, “B” for Meter-in 　As for the above model code with (K), when selecting “Low cracking pressure type” (Check valve cracking pressure: 0.02MPa), ( ) is removed from the model code. Anti-spatter Series Chart Characte

■ Flow characteristic Elbow Flow rate (l/min(ANR)) Control flow Flow rate (l/min(ANR)) Control flow Flow rate (l/min(ANR)) Anti-spatter Series Constant Flow Series Throttle (Needle) Valve Series Stainless Series PP Series Anti-spatter Series Quick Exhaust Valve Series Free flow Control flow Free flow Free flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Free flow Flow rate (l/min(ANR)) Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) MAKE-TO-ORDER PRODUCTS Free flow Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Free flow Flow rate (l/min(ANR)) Control...

Controller Series Anti-spatter Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Control flow Free flow Control flow Free flow Control flow Stainless Series Free flow Flow rate (l/min(ANR)) Control flow Flow rate (l/min(ANR)) Anti-spatter Series Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Control flow Speed Controller Series Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Free flow Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Speed Controller

Safety Instructions SAFETY Instructions 　This safety instructions aim to prevent personal injury and damage to properties by requiring proper use of PISCO products. 　Be certain to follow ISO 4414 and JIS B 8370 ISO 4414Pneumatic fluid power…Recomendations for the application of equipment to transmission and control systems. JIS B 8370General rules and safety requirements for systems and their components. This safety instructions is classified into “Danger”, “Warning” and “Caution” depending on the degree of danger or damages caused by improper use of PISCO products. Danger Hazardous conditions....

http://www.pisco.co.jp http://www.pisco.co.jp Disclaimer 1. PISCO does not take any responsibility for any incidental or indirect loss, such as production line stop, interruption of business, loss of benefits, personal injury, etc., caused by any failure on use or application of PISCO products. 2. PISCO does not take any responsibility for any loss caused by natural disasters, fires not related to PISCO products, acts by third parties, and intentional or accidental damages of PISCO products due to incorrect usage. 3. PISCO does not take any responsibility for any loss caused by improper usage...

Safety Instructions SAFETY INSTRUCTION MANUAL PISCO products are designed and manufactured for use in general industrial machines. Be sure to read and follow the instructions below. 1. Do not use PISCO products for the following applications. ① Equipment used for maintaining / handling human life and body. ② Equipment used for moving / transporting human. ③ Equipment specifically used for safety purposes. 1. Do not use PISCO products under the following conditions. ① Beyond the specifications or conditions stated in the catalog, or the instructions. ② Under the direct sunlight or outdoors. ③...