CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Speed Controller of Stainless Steel Speed Controller SUS303 Equivalent Corrosivity Copper alloy free material steel (Cr19~21%, Mo1.5~2.5%) whose Corrosion resistance is equivalent to SUS303 is adopted. ● Copper ● HNBR alloy free Material for Seal Rubber against Low Ozone Concentration Stainless Series PP Series Anti-spatter Series Constant Flow Series Throttle (Needle) Valve Series Stainless Series PP Series Anti-spatter Series Quick Exhaust Valve Series Exhaust Valve Series Fixed orifice Series Pressure Control er Series Pressure Gauge Series Check Valve Series Silencer Ser

Controller Series Speed Controller ■ Model Designation (Example) SJS Speed Controller SUS303 Equivalent Corrosivity Type: C (Elbow) only ① Tube dia. ② Thread size Thread size Metric thread type(mm) Taper pipe thread 03 ③ Control direction Code Control direction ■ Air from thread side is controlled. Air from tube side ■ Air from tube side is controlled. Air from thread is not controlled and flows out from thread side. Speed Controller Series side is not controlled and flows out from tube side. Solenoid valve Stainless Series Control flow Single-acting cylinder Free flow Control flow Free flow...

■ Specifications Fluid medium Check valve cracking pressure Operating temp. range Operating pressure range VALVE TUBE ■ Construction Symbol Tube End Needle (Special stainless steel ※) Lock-claws (Stainless steel) Metallic body (Special stainless steel ※) MAKE-TO-ORDER PRODUCTS Elastic sleeve (HNBR) Locknut (Special stainless steel ※) Tube O-ring (HNBR) Resin body (PBT) Guide ring (Special stainless steel ※) Diaphragm (HNBR) Taper pipe thread: Sealock- coating Metric thread: With gasket (POM) ※ Equivalent Corrosion Resistance to SUS303 Stainless Series PP Series Detailed Safety Instructions Before...

Controller Series Speed Controller ■ How to identify the series of Speed Controller Type Standard Release-ring Resin body Oval, Round / Black Clean-room package Oval, Round / Light-blue Light-gray Locknut color B type High-flow Series Round / Black Low-flow Series Oval, Round / Black Resin body SUS303 Series Oval, Round / Dark-blue Round / Semitransparent Semitransparent ※ 1. ( ) is for low cracking pressure type. ■ How to adjust the speed 1. Speed adjustment of actuators ① Increasing speed Stainless Series closed state. The more too fast. Make sure the needle is opened, Speed Controller Series...

■ How to insert and disconnect 1. How to insert and disconnect tubes CONTROLLER ① Tube insertion 　Insert a tube into Push-In Fitting up to the tube end. Lock-claws bite the tube and fix it automatically, then the elastic sleeve seals around the tube. 　Refer to “2. Instructions for Tube Insertion” under “Common Safety Instructions ② Tube disconnection 　The tube is disconnected by pushing release-ring to release Lock-claws. 　Make sure to stop air supply before the tube disconnection. MAKE-TO-ORDER PRODUCTS 2. How to tighten thread ① Tightening thread 　Use a spanner to tighten a hexagonal-column....

Controller Series SUS303 Equivalent Corrosivity SJSC Elbow Release-ring Mini type R φD：4～6 Speed Controller Release-ring Standard type Metric thread type Unit：mm Tube O.D. Model code øD 409 Speed Controller Series Stainless Series Chart Characteristic chart page ※ . “L1” and “L2” are reference values for height dimensions after tightening taper thread. ※ . □ in Model code / Replaced with ” A” for Meter-out, “B” for Meter-in Weight CAD (g) file name

■ Flow characteristic Elbow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Stainless Series PP Series Anti-spatter Series Constant Flow Series Throttle (Needle) Valve Series Stainless Series PP Series Anti-spatter Series Quick Exhaust Valve Series Free flow Control flow Free flow Control flow Free flow Flow rate (l/min(ANR)) Free flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Control flow MAKE-TO-ORDER PRODUCTS Free flow Flow rate (l/min(ANR)) Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate...

Controller Series SUS303 Equivalent Corrosivity Elbow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Free flow Control flow Free flow Control flow Stainless Series Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Free flow Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Control flow Speed Controller Series Free flow Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Speed Controller

Safety Instructions SAFETY Instructions 　This safety instructions aim to prevent personal injury and damage to properties by requiring proper use of PISCO products. 　Be certain to follow ISO 4414 and JIS B 8370 ISO 4414Pneumatic fluid power…Recomendations for the application of equipment to transmission and control systems. JIS B 8370General rules and safety requirements for systems and their components. This safety instructions is classified into “Danger”, “Warning” and “Caution” depending on the degree of danger or damages caused by improper use of PISCO products. Danger Hazardous conditions....

http://www.pisco.co.jp http://www.pisco.co.jp Disclaimer 1. PISCO does not take any responsibility for any incidental or indirect loss, such as production line stop, interruption of business, loss of benefits, personal injury, etc., caused by any failure on use or application of PISCO products. 2. PISCO does not take any responsibility for any loss caused by natural disasters, fires not related to PISCO products, acts by third parties, and intentional or accidental damages of PISCO products due to incorrect usage. 3. PISCO does not take any responsibility for any loss caused by improper usage...

Safety Instructions SAFETY INSTRUCTION MANUAL PISCO products are designed and manufactured for use in general industrial machines. Be sure to read and follow the instructions below. 1. Do not use PISCO products for the following applications. ① Equipment used for maintaining / handling human life and body. ② Equipment used for moving / transporting human. ③ Equipment specifically used for safety purposes. 1. Do not use PISCO products under the following conditions. ① Beyond the specifications or conditions stated in the catalog, or the instructions. ② Under the direct sunlight or outdoors. ③...