Minimum Dust Ejection, Low Noise, Open-Close Flap, Hinge Connection Type Plarailchain SC Calculation of Number of Links K S 2 * HF in the chart above is the height which Plarailchain is able to pass through using under the length of free span with allowable expansion without load such as cables, hoses, etc. * Please make inquiries for special travel conditions. (1) Size (Overall dimensions: H × W) Code Model Designation (Example) (1) * The bending radius of SC type signifies minimum bending radius of cables inside. * Two kinds of brackets, one for fixed-end and the other for moving-end, are required. Select a designation code for the bracket from page 48 to 49. In case of ordering, please apply Model code in the following chart. Detailed Safety Instructions Before using PISCO products, be sure to read "Safety Instructions" and "Common Safety Instructions for Products in This Catalog" on page 13 to 16 and "Common Safety Instructions for Plarailchain" on page 24 to 29. Free span • New connecting structure with no sliding parts,managed to minimize the generation of dust. The bending part is made into hinge structure, and link increase and decrease are also possible. • Link-against-link friction noise, which is generated when links are running, is significantly decreased thanks to use of softmaterial of low percussive noise. • Since the main inner part in contact with an internal storage cable is made up with soft material though rigidity is maintained by a framework structure, the wear to a cable decreases remarkably. • Hard material is made into the structure as a framework of soft material, and now it is possible to prevent the decrease in products rigidity, which is incidental to soft material-based products. • Flaps are made of the same material as SP series products, making it possible to further increase rigidity while decreasing cable abrasion. • Our flaps are designed not only to open left or right as desired, but also to facilitate mounting/removal. They can also be placed in any direction. • Low-cost & light weight resin bracket is prepared. • Standard one-piece design metal bracket and two-piece design stainless steel bracket accommodating 16 mounting styles are also prepared. * As for R dimension of SC series, be careful that there are formal R descriptions and the R descriptions ([ ] values in above chart) for link number calculation. Number of links is to be calculated by the following equation: S —+a+l 2 n =— P n: Number of links (Figures below decimal point are raised to one positive number) S: Transfer stroke (mm or inch) a: πR + 2K (R: Bending radius (mm or inch), K: Play (mm or inch)) l: Distance from intermediate point (mm or inch) when the fixed-end is not in the middle of transfer stroke (when the transfer stroke is in the intermediate point : 0) P: Pitch (mm or inch) Setting fixed-end in the inter

TPEE, Nylon 6 (glass 30%) Plarailchain material Bracket material Minimum Dust Ejection, Low Noise, Open-Close Flap, Hinge Connection Type SPCC with chrome plating (RoHS compliance) Service temp. range Operating environment Avoid using in acid/alkaline atmosphere or in hot water /ft. mm inch mm inch mm inch mm inch mm inch mm inch m Caution * Free span is the maximum length that Plarailchain can travel horizontally. * The metal brackets must be ordered separately. (See page 48 & 49) * Select bending radius from the list below and enter into As for SC1520As for SC2040- * Make-to-order production...

Plarailchain SC The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Brackets for Attachment of Plarailchain (One-piece design bracket for SC1520, 2040, 2540, 2560, 2580, 3560, 35100) Select best-suited for your application from among a variety of bracket models. Moving-end and fixed-end must be ordered separately when you need them both. Use Bracket type Orientation Outer periphery fix Model code Model code Model code Model code Caution * Same brackets are used for moving-end and fixed-end. Therefore, two sets are required...

The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Brackets for Attachment of Plarailchain SC Select best-suited for your application from among a variety of bracket models. Moving-end and fixed-end must be ordered separately when you need them both. Use Bracket type Orientation Outer periphery fix Model code Model code Model code Model code Model code Model code Model code Model code Caution * Same brackets are used for moving-end and fixed-end. Therefore, two sets are required for moving-end and fixed-end.

Common Safety Instructions for Plarailchain Before selecting or using PISCO products, read the following instructions. Read the detailed instructions for individual series as well as the instructions below. Warning : 1. Never step on Plarailchain. Otherwise the chain may break and you will fall down. 2. When connecting, opening, closing, or carrying out maintenance and checks, hold the Plarailchain motionless. Otherwise the Plarailchain may run or fall under its own weight, thus doing injuries to you. 3. Pay attention to the flexing areas of the Plarailchain. You can get injured with your hand...

Capability Diagram When total weight and max. diameter of cable hose, and transfer stroke are decided, please select a best suitable Plarailchain from the following capability diagram. The bending radius of Plarailchain must be larger than the one of cable/hose. Remarks 1. F = Free span = Length can be travelled horizontally 2. The diagram is a case when fixed-end is set to the center of transfer stroke. 3. ø: Maximum diameter of cable or hose to be stored.

Safety Instructions for fixing storage items (tubings/ cables) This instruction is only examples to decrease the wear and tear of tubings/ cables inside the Plarailchain, but do not guarantee the effect for all types. As such, please conduct test use before actual operation. 1. Storage of tubings/cables 1. Please select tubings/cables with less than the minimum-bending radius of plarailchain. In addition, please fix crook of tubings/ cables before installing in Plarailchain. 2. When plenty of tubings/cables are installed, please use "divider" or "rack" inside in order to avoid spiral twist of...