Low Abrasion, Low Noise, Open-Close Flap Type Plarailchain SP Calculation of Number of Links • Compared with conventional products, improved durability of cables, hoses, and components.(Special resins reduce wear and tear by one-fourth to one-fifth of conventional products.) • As for SP45 □・55 □・80 □ type, the flap inside can be opened and closed. • Rack is available for SP80300 additionally to divider. • Antistatic type, best suitable for the environment where static electricity should be dissipated, is available. Free span S 2 * HF in the chart above is the height which Plarailchain is able to pass through using under the length of free span with allowable expansion without load such as cables, hoses, etc. * Please make inquiries for special travel conditions. Model Designation (Example) SP 1520 (1) (1) Size (Overall dimensions: H × W) In case of ordering, please apply Model code in the following chart. Detailed Safety Instructions Before using PISCO products, be sure to read "Safety Instructions" and "Common Safety Instructions for Products in This Catalog" on page 13 to 16 and "Common Safety Instructions for Plarailchain" on page 24 to 29. * Two kinds of brackets, one for fixed-end and the other for moving-end, are required. Select a designation code for the bracket from page 41. Number of links is to be calculated by the following equation: S —+a+l 2 n =— P n: Number of links (Figures below decimal point are raised to one positive number) S: Transfer stroke (mm or inch) a: πR + 2K (R: Bending radius (mm or inch), K: Play (mm or inch)) l: Distance from intermediate point (mm or inch) when the fixed-end is not in the middle of transfer stroke (when the t

Max. transfer speed lb./ft Plarailchain material SPCC with chrome plating (RoHS compliance) Bracket material Service temp. range Operating environment Avoid using in acid/alkaline atmosphere or in hot water 5575 Model Max. transfer m stroke Max. transfer speed lb./ft Plarailchain material SPCC with chrome plating (RoHS compliance) Bracket material Service temp. range Operating environment Avoid using in acid/alkaline atmosphere or in hot water The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Metal Brackets for Attachment...

The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Low Abrasion, Low Noise, Open-Close Flap Type Low Abrasion, Low Noise, Open-Close Flap Type Model code Model code /ft. mm inch mm inch mm inch mm inch mm inch mm inch m Caution * Free span is the maximum length that Plarailchain can travel horizontally. * The metal brackets must be ordered separately. (See P. 41) * Select bending radius from the list below and enter into As for SP15**- * Make-to-order production Low Abrasion, Low Noise, Open-Close Flap Type Model code...

The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Model code Model code Model code Model code Applicable Model code Flap Model code Model code Flap for SP45125 Flap for SP45150 Flap for SP45175 Joint collar Model code Model code Rack divider Model code Joint collar Rack divider Model code Model code SP45250 Applicable Model code R-cap Model code Model code Caution for R-piece and Joint collar * Select bending radius (R) from Model Designation in P. 40 a

Common Safety Instructions for Plarailchain Before selecting or using PISCO products, read the following instructions. Read the detailed instructions for individual series as well as the instructions below. Warning : 1. Never step on Plarailchain. Otherwise the chain may break and you will fall down. 2. When connecting, opening, closing, or carrying out maintenance and checks, hold the Plarailchain motionless. Otherwise the Plarailchain may run or fall under its own weight, thus doing injuries to you. 3. Pay attention to the flexing areas of the Plarailchain. You can get injured with your hand...

Capability Diagram When total weight and max. diameter of cable hose, and transfer stroke are decided, please select a best suitable Plarailchain from the following capability diagram. The bending radius of Plarailchain must be larger than the one of cable/hose. Remarks 1. F = Free span = Length can be travelled horizontally 2. The diagram is a case when fixed-end is set to the center of transfer stroke. 3. ø: Maximum diameter of cable or hose to be stored.

Safety Instructions for fixing storage items (tubings/ cables) This instruction is only examples to decrease the wear and tear of tubings/ cables inside the Plarailchain, but do not guarantee the effect for all types. As such, please conduct test use before actual operation. 1. Storage of tubings/cables 1. Please select tubings/cables with less than the minimum-bending radius of plarailchain. In addition, please fix crook of tubings/ cables before installing in Plarailchain. 2. When plenty of tubings/cables are installed, please use "divider" or "rack" inside in order to avoid spiral twist of...

2. Fixing of tubings/cables 1. Please fix tubings/cables as close as possible to the fixing bracket at both ends. Fixing far apart from the bracket causes looseness of the tubings/ cables. 2. Applying metal or resin plates with large surface friction resistance as fixture is acceptable. Tuck tubings/cables between base part and plate as shown below. Note) When a number of tubings/cables are fixed by a banding band together as shown below, some of them might not be touched and fixed by the band and causes loosening. Base part 3. When a number of tubings/cables are fixed by banding band, please...

Safety Instructions for safety device (guide-rail) installation When Plarailchain is used in long stroke or for long time even within the acceptable value of the free-span, the installation of safety device such as guide-rail can prevent sagging or loosening of Plarailchain. (However, the moving speed and acceleration speed are limited by the installation.) Moreover, since the following instruction is only rough indication, please contact PISCO for details. 1. Installation of guide-rail and guide-roller * Do not use guide-roller for the application of more than 1m/s moving speed. Please consider...