Website:
NIHON PISCO CO., Ltd.
Group: 株式会社日本ピスコ
Catalog excerpts
FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Compression Fitting of All Brass Brass Compression Fitting Series Metal Brass for Metallic Body. Improved Resistance to Water. Suitable for Automobile Industry and Molding Die Temperature Control. Sleeve Required. No Worry about Forgetting or Losing Sleeve. Variations of Products for Various Applications. 5 types of Shape: C, CF, MF, L and E Applicable tube size: ø4~16mm (10 sizes) Anti-spatter ＆ Brass Series Die Temperature Control Minimal Series Stop Fitting Series Rotary Series Twist-Proof Fitting Block and Connector Coupling Col
Open the catalog to page 1
Fitting Series FITTING Brass Compression Fitting Series ■ Model Designation (Example) NK Brass Compression Fitting Female Straight Bulkhead Female Straight Identification groove Thread size Taper pipe thread Code Standard Series Mini Series Stainless Series Chemical Series PP Series EG Series Anti-spatter Brass Series ■ Specications Fluid medium Max. operating pressure Max. vacuum Operating temp. range Air / Water / Others (※) Follow the max. operation pressure of tube specification -100kPa Depend on the range of tube specification (No freezing) Warning ※ 1. Be sure to contact us in case of...
Open the catalog to page 2
Cap Nut (Brass) Metallic body (Special brass) VALVE TUBE ※1 ※ 1. Shape with Identification groove. Available tube I.D. : ø5, ø6.5, ø8, ø11mm MAKE-TO-ORDER PRODUCTS ※ 2. Shape without Identification groove. Available tube I.D. : ø2.5, ø4, ø6, ø7.5, ø9, ø13mm Detailed Safety Instructions Before using PISCO products, be sure to read “Safety Instructions” and “Safety Instruction Manual” on page 23 to 27 and “Common Safety Instructions for Fittings” on page 33 to 35. Warning 1. When using chemicals or mixed gases as a fluid medium, be sure to contact us first. Depending on conditions, it may...
Open the catalog to page 3
Fitting Series FITTING Brass Compression Fitting Series ■ Standard Size List Connection: Thread ⇔ Tube Type NKC Straight Tube O.D. x I.D. (mm) Page Thread size 4×2.5 6×4 8×5 8×6 10×6.5 10×7.5 12×812×9 16×11 16×13 P.239 R1/8 ● ● ● ● R1/4 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● R3/8 ● ● ● ● ● ● R1/2 P.240 R1/8 ● ● ● ● R1/4 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● R3/8 ● ● ● ● ● ● R1/2 Connection: Tube ⇔ Tube (Equal dia.) Type NKE Union Tee 237 Standard Series Mini Series Stainless Series Chemical Series PP Series EG Series Anti-spatter ＆ Brass Series Page Thread size NKCF Female Straight P.242 Rc1/8 ●...
Open the catalog to page 4
1. How to insert and disconnect tubes Pass the tube through the nut and insert the barb into the tube up to the barb end. Use a spanner to tighten the nut until the screw end. ※ Hold tube in tightening the nut to avoid tube twisting. Loosen the nut with a spanner first and pull the tube out. ② Tube disconnection Before tube disconnection, make sure to stop fluids such as air, water, etc. MAKE-TO-ORDER PRODUCTS 2. How to tighten thread ① Tightening thread Use a spanner to tighten a hexagonal-column or square part of the fitting. Since there is no Sealock coating on taper pipe thread,...
Open the catalog to page 5
Fitting Series NKC Straight R Tube O.D. x I.D. Model code øD 239 Standard Series Mini Series Stainless Series Chemical Series PP Series EG Series Anti-spatter ＆ Brass Series Hex. Effective area Weight CAD (mm2) (g) file name H2 10 ※ . “L” is a reference value for height dimension after tightening thread. 3D 3D CAD data is available at PISCO website. CAD Brass Compression Fitting Series
Open the catalog to page 6
CONTROLLER VALVE ※ . “L” is a reference value for height dimension after tightening thread. MAKE-TO-ORDER PRODUCTS Effective area Weight CAD Hex. Hex. ø P1 ø P2 (mm2) (g) file name H1 H2 Tube O.D. x I.D. Model code øD Anti-spatter ＆ Brass Series Die Temperature Control Minimal Series Stop Fitting Series Rotary Series Twist-Proof Fitting Block and Connector Coupling 3D 3D CAD data is available at PISCO website. CAD
Open the catalog to page 7
Fitting Series NKE Union Tee Brass Compression Fitting Series Unit：mm Tube O.D. x I.D. Model code øD NKE0425 NKE0640 NKE0850 NKE0860 NKE1065 NKE1075 NKE1280 NKE1290 Effective area Weight CAD (mm2) (g) file name 241 Standard Series Mini Series Stainless Series Chemical Series PP Series EG Series Anti-spatter ＆ Brass Series 3D 3D CAD data is available at PISCO website. CAD
Open the catalog to page 8
Hex. Effective area zqWeight CAD (mm2) (g) file name H2 14 17 MAKE-TO-ORDER PRODUCTS Tube O.D. x I.D. Model code øD NKCF Female Straight Anti-spatter ＆ Brass Series Die Temperature Control Minimal Series Stop Fitting Series Rotary Series Twist-Proof Fitting Block and Connector Coupling 3D 3D CAD data is available at PISCO website. CAD CAD CAD data is available at PISCO website.
Open the catalog to page 9
Fitting Series NKMF Bulkhead Female Straight Brass Compression Fitting Series Tube O.D. x I.D. Model code øD Standard Series Mini Series Stainless Series Chemical Series PP Series EG Series Anti-spatter ＆ Brass Series Unit：mm Hex. Hex. Hex. Effective area Weight CAD H1 H2 H3 (mm2) (g) file name 3D 3D CAD data is available at PISCO website. CAD
Open the catalog to page 10
Safety Instructions SAFETY Instructions This safety instructions aim to prevent personal injury and damage to properties by requiring proper use of PISCO products. Be certain to follow ISO 4414 and JIS B 8370 ISO 4414Pneumatic fluid power…Recomendations for the application of equipment to transmission and control systems. JIS B 8370General rules and safety requirements for systems and their components. This safety instructions is classified into “Danger”, “Warning” and “Caution” depending on the degree of danger or damages caused by improper use of PISCO products. Danger Hazardous...
Open the catalog to page 11
http://www.pisco.co.jp http://www.pisco.co.jp Disclaimer 1. PISCO does not take any responsibility for any incidental or indirect loss, such as production line stop, interruption of business, loss of benefits, personal injury, etc., caused by any failure on use or application of PISCO products. 2. PISCO does not take any responsibility for any loss caused by natural disasters, fires not related to PISCO products, acts by third parties, and intentional or accidental damages of PISCO products due to incorrect usage. 3. PISCO does not take any responsibility for any loss caused by improper...
Open the catalog to page 12All NIHON PISCO CO. catalogs and technical brochures
-
CTB series1 Pages
-
FUS8 series3 Pages
-
31 & 32 Series20 Pages
-
Vacuum Pad Soft Series86 Pages
-
VP series106 Pages
-
CHA series8 Pages
-
Gripper Series15 Pages
-
SVB Series50 Pages
-
SVA series13 Pages
-
SVR series31 Pages
-
NSB series8 Pages
-
Ball Valve SUS304 series8 Pages
-
BV series8 Pages
-
HV series5 Pages
-
Cable clamp & Dividing sheet8 Pages
-
Plarailchain SC15 Pages
-
Plarailchain SPO12 Pages
-
Plarailchain SP14 Pages
-
HPO12 Pages
-
HPU12 Pages
-
PJN series15 Pages
-
KJNC series15 Pages
-
SSJS series6 Pages
-
Flow Control Valve PP Series12 Pages
-
Stainless SUS31613 Pages
-
UE series12 Pages
-
FB series1 Pages
-
CTA series1 Pages
-
SFTN series2 Pages
-
SET series1 Pages
-
SFT series14 Pages
-
ULF series12 Pages
-
UCQ series2 Pages
-
UQ series12 Pages
-
NB series12 Pages
-
NA series12 Pages
-
UD series12 Pages
-
UBS series12 Pages
-
UBT series12 Pages
-
UC series1 Pages
-
UB series12 Pages
-
AK/AS series26 Pages
-
Brass Series30 Pages
-
V-0 series27 Pages
-
EG Series27 Pages
-
PP Fitting series12 Pages
-
PP Series26 Pages
-
AP series18 Pages
-
SL series16 Pages
-
P-SUS series33 Pages
-
NS series24 Pages
-
SSP series8 Pages
-
ATS series6 Pages
-
Air Filter20 Pages
-
Combination Unit Series25 Pages
-
SFU series9 Pages
-
JP series15 Pages
-
ET series11 Pages
-
EQ series19 Pages
-
CVLU series21 Pages
-
CV series24 Pages
-
JN series25 Pages
-
Speed Controller Constant Flow15 Pages
-
JSD series10 Pages
-
JS Low-Flow series17 Pages
-
JSC series13 Pages
-
JS series30 Pages
-
Miniature Pressure Regulator12 Pages
-
MA series16 Pages
-
RH series16 Pages
-
R series16 Pages
-
PS series16 Pages
-
L series41 Pages
-
FUS207 Pages
-
Small Flow Sensor FUS8 Sries3 Pages
-
GP series13 Pages
-
VUS-32. SEU-32 Series1 Pages
-
Small Pressure Sensor 11-series24 Pages
-
VUS12 series2 Pages
-
VUS21 series14 Pages
-
VUS8-S series22 Pages
-
JSD series10 Pages
-
Orifice Fitting Series6 Pages
-
JK series10 Pages
-
RVFUP series6 Pages
-
VLF series16 Pages
-
VFL series8 Pages
-
VF series22 Pages
-
ECV series8 Pages
-
VPLFC, VPLFD series17 Pages
-
VPKE series4 Pages
-
RPV06 Series8 Pages
-
VZ Series34 Pages
-
VX Series42 Pages
-
VQ Series4 Pages
-
VN Series40 Pages
-
VK series53 Pages
-
VJ Series34 Pages
-
VG series21 Pages
-
VRL series17 Pages
-
VVV series11 Pages
-
VLS series4 Pages
-
VM | VC series28 Pages
-
VY series24 Pages
-
VB series11 Pages
-
VH | VS series28 Pages
-
VPHMP series12 Pages
-
VYR series5 Pages
-
HS series13 Pages
-
HML series14 Pages
-
VRG series18 Pages
-
Dry Unit Series33 Pages
-
Fiber Membrane Air Dryer12 Pages
-
VLM series12 Pages
-
VSPE series5 Pages
-
VT series21 Pages
-
PB series13 Pages
-
JSG series17 Pages
-
pararel3 Pages
-
fitting4 Pages
-
BJSU series4 Pages
-
SC15 Pages
-
SPO12 Pages
-
SP13 Pages
-
RPV pump8 Pages
-
Pre-set6 Pages
-
Stainless Steel Ball Valve8 Pages
-
SUS316 Flow Control Valve6 Pages
-
Flange13 Pages
-
HML14 Pages
-
End of Arm Vacuum Gripper12 Pages
-
VYR5 Pages
-
EOAT VRG | VMG series18 Pages
-
VPLFC17 Pages
-
SVB172 Pages
-
SVR39 Pages
-
8mm Sensor22 Pages
-
Vacuum Filter28 Pages
-
Fall Prevention18 Pages
-
Vacuum Pen21 Pages
-
Push-Rod Release4 Pages
-
cylinder22 Pages
-
FDAbellows6 Pages
-
Oval80 Pages
-
sponge50 Pages
-
mark-free34 Pages
-
flat42 Pages
-
Ultrathin34 Pages
-
packaging bag13 Pages
-
multi-bellow46 Pages
-
bellows pad74 Pages
-
Skid proof pad42 Pages
-
soft bellow pad60 Pages
-
soft pad66 Pages
-
VRL17 Pages
-
VH VS VC VUM VU VY VB336 Pages
-
VZ34 Pages
-
VX42 Pages
-
VVV11 Pages
-
VQ42 Pages
-
VN40 Pages
-
VLS4 Pages
-
VLM12 Pages
-
VK53 Pages
-
VJ34 Pages
-
VG21 Pages
-
Vacuum Tube12 Pages
-
Twin Coiling12 Pages
-
Tube Cutter12 Pages
-
Polyurethane Tube12 Pages
-
Nylon Tube Series12 Pages
-
Multi-core Planar Tube12 Pages
-
Low-Friction Polyurethane Tube12 Pages
-
Insert Ring12 Pages
-
Fluororesin (PFA) Tube14 Pages
-
UL series12 Pages
-
Anti-spatter Tube12 Pages
-
Tube Fitting PP Series26 Pages
-
Tube Fitting Mini Series41 Pages
-
Tube Fitting Chemical Series18 Pages
-
K series30 Pages
-
Stop Fitting Series16 Pages
-
Rotary Joint Series16 Pages
-
Multi-Circuit Rotary Block12 Pages
-
Minimal Fitting Series20 Pages
-
Main Block Series24 Pages
-
Light Coupling Series24 Pages
-
High Rotary Joint Series16 Pages
-
Connector Series16 Pages
-
Color Cap12 Pages
-
Brass Compression Fitting Series18 Pages
-
2-Circuit Junction Block Series16 Pages
-
Vacuum EOAT Kit HML14 Pages
-
Vacduum gripper18 Pages
-
Mounting Flange for EOAT.pdf13 Pages
-
SSNC series13 Pages
-
SJSC series24 Pages
-
Speed Controller Series32 Pages
-
Speed Controller PP Series17 Pages
-
Speed Controller Low Flow17 Pages
-
Speed Controller High Flow13 Pages
-
Speed Controller Brass Series15 Pages
-
KJSC series17 Pages
-
Silencer Series13 Pages
-
Quick Exhaust Valve Series19 Pages
-
Pressure Gauge Series13 Pages
-
Miniture quick-exhaust17 Pages
-
Fixed Orifice Joint Series22 Pages
-
Check Valve4 Pages
-
SUS304_Ball Valve Series8 Pages
-
Parallel Gripper6 Pages
-
JSG17 Pages
-
GENERAL106 Pages
-
Mechanical Valve Series19 Pages
-
Ball Valve Series19 Pages
-
Stainless Steel ball valve6 Pages
-
Hand Valve Series15 Pages
-
Change Valve11 Pages
-
SVA21 Series21 Pages
-
P Series71 Pages
-
SVA20 Series43 Pages
-
RegulatorPL031821m12 Pages
-
BJSU series6 Pages
-
NP68-01e17 Pages
