Q Troubled by unintended setting change ？ A Slot-head Speed Controller JSD can help you! It prevents unnecessary manual adjustments during the operations. Design without an external needle for speed adjustment. Use a slot screwdriver to adjust the needle. Approx. 2/3 height of the conventional speed controller.* Suitable for a small space. Compact piping! *Compared to the max. height of the conventional speed controller. Rotation of the resin body Rotation of the resin body Fluid medium 360° rotatable resin body (Elbow type). 360° rotatable resin body and push-in fitting part (Free type). Free direction for piping. Operating pressure range Check valve opening pressure Operating temp. range Rotation of the push-in fitting part Rotation of the resin body Rotation of the resin body Elbow type Parts name Lock claws Release ring Tube Guide ring Elastic sleeve O-ring Metallic body *1 Resin body Diaphragm Needle Rotation of the push-in Free part fitting type Material Stainless steel POM Polyurethane or nylon Nickel-plated brass NBR NBR Nickel-plated brass PBT HNBR Nickel-plated brass *1. Metallic body with M3 thread : Special stainless steel (Austenite or ferritic stainless steel with SUS303 equivalent corrosivity) *2. Gasket for metric thread : SUS304+NBR o

Model designation (Example) JSD C 6 - N1 A U 　 ② ⑤.Specification / Packaging option (*Metric thread and Taper thread only) Code No code W -C W-C Specification Standard color: Light-Gray Cleanroom Cleanroom&Light-Gray Release ring Black Light-Gray Light-Blue Light-Gray (Material) （POM） （POM） （POM） （POM） Resin body color Black PBT） （ Light-Gray PBT） （ (Material) Slot-head speed controller *1.Metallic body with M3 thread is made of special stainless steel (Austenite or ferritic stainless steel with SUS303 equivalent corrosivity) *2.Clean-room packaging, Light-Gray, and clean-room & light-gray spec....

Slot-head Speed Controller How to adjust the speed Use a slot screwdriver to adjust the speed of actuators with slot-head speed controller. Refer to the table below for size of slot screwdrivers. ●The tip of a slot screwdriver A Max. thickness of the applicable slot screwdriver tip （㎜） M3×0.5, M5×0.8, U10 0.7 Thread size（R） B Max. width of the applicable slot screwdriver tip （㎜） 3.5 counterclockwise direction clockwise direction to reduce from a fully closed state to increase the speed of an actuator. How to insert and disconnect 1. How to insert and disconnect tubes ① .Tube insertion Insert...

JSDC Elbow （mm - R, inch - R） 　 Release ring Mini øG: 3 ∼6, 1/8 Release ring Standard Metric thread Unit：mm Model code JSDC3-M3 ♶ ₅ JSDC3-M5 ♶ ₅ Weigh List price (JPY) (g) Std. Cleanroom *1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. ♷ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. *3. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *4. Value in [ 　] is for cleanroom packaging. *5. Dimension F represents max. thickness of the applicable slot screwdriver...

Slot-head Speed Controller Release ring Mini øG: 1/8, 5/32 Release ring Standard Unified thread Unit：mm Model code Weigh List price (g) (JPY) 6.3 *1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *3. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width

JSDS Free （mm - R, inch - R） E Release ring Mini øG : 3 ∼6, 1/8 Release ring Standard Metric thread Unit：mm Model code JSDS3-M3 ♶ ♷ JSDS3-M5 ♶ ♷ Weigh List price (JPY) (g) Std. Cleanroom *1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. ♷ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. *3. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *4. Value in [　 ] is for cleanroom packaging. *5. Dimension F represents max. thickness of the applicable slot screwdriver...

Slot-head Speed Controller JSDS Free (inch- NPT） Release ring Mini øG : 1/8, 5/32 Release ring Standard Unified thread Unit：mm Model code Weigh List price (g) (JPY) *1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *3. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of the

JSDS 6-01 8-01 1/4-01 5/16-01 Cylinder tube I.D. Max. ø32mm JSDS 6-02 8-02  10-02    1/4-02    5/16-02    3/8-02 Cylinder tube I.D. Max. ø40mm Control flow Free flow Free flow Control flow Flow rate (l/min(ANR)) Control flow Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Free flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow characteristic (Reference)

Flow rate (l/min(ANR)) Control flow Control flow Free flow Flow rate (l/min(ANR)) Free flow Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR

Detailed Safety Instructions Warning 1. When controlling the speed of actuators, slowly release the air by adjusting the needle from a fully closed state. In case the needle is opened, actuator can move suddenly. Turn needle in the clockwise direction to close, and in the counterclockwise to open. 2. Do not swing or rotate resin body of the products by force. It may damage to the products and cause a fluid leakage. 3. Flow rate may be changed by needle rotation when using slot-head speed controller at the place having vibrations or shocks. Use conventional speed controller having lock-nut on...