JS series
30Pages

Catalog excerpts

CONTROLLER Air preparation VALVE TUBE MAKE-TO-ORDER Technical PRODUCTS information Push-In Fitting Type Speed Control Valve Speed Controller Series ● Rotatable Resin Body and Fitting(JSS Type) 406 Speed Control er Series Stainless Series PP Series Anti-spatter Series Constant Flow Series Rotatable Resin Body A Rotatable Resin Body B Rotatable Fitting Body A / B Direction and Fitting part. Easy Tube Insertion / Disconnection(JSM Type) w Ne● Union type has been renewed to Small union type. Achieved downsizing of Union type. Throttle (Needle) Valve Series Stainless Series PP Series Anti-spatter Series Quick Exhaust Valve Series Exhaust Valve Series Fixed orifice Series Selection of Body Color (light-gray) and Clean-Room Package. Pressure Control er Series Fluorine-based grease is used on O-ring for clean-room package. Pressure Gauge Series Products are packed in a clean room equivalent to ISO class 6 after cleaning. ▶ Easily understandable video about the characteristics of Speed controller is available. 　　 http://en.pisco.co.jp/product/detail/b/b01/ Check Valve Series Sile

Open the catalog to page 1

Controller Series Model Designation (Example) JS Speed Controller Series Speed Controller A ⑥ Color option+Packaging option ⑤ Check valve specifi cation ④ Control direction Small Union Straight Metric thread Taper pipe thread ③ . Thread size ( ※ No code entry for Small union straight type (JSMU)) Thread size Metric thread(mm) Taper pipe thread Speed Control er Series ④ . Control direction ( ※ No code entry for Small union straight type (JSMU)) Code Control direction ■ Air from thread side is controlled. Air from tube side 　is not controlled and flows out from thread side. ■ ir from tube...

Open the catalog to page 2

Small Union Straight Air Operating pressure range Check valve cracking pressure Operating temp. range CONTROLLER Air preparation VALVE Fluid medium Needle (Nickel-plated brass) Locknut (Aluminum) Metallic body (Nickel-plated brass※1) Elastic sleeve (NBR) Lock-claws (Stainless steel) Release ring (POM) Tube MAKE-TO-ORDER Technical PRODUCTS information 408 Resin body (PBT) Diaphragm (NBR ※ 2) Guide ring (Nickel-plated brass) Taper pipe thread: Sealock - coating Metric thread: With gasket (SUS304+NBR or SPCC+NBR※3) ※1. Metallic body with M3 thread is made of special stainless steel (Austenite...

Open the catalog to page 3

Controller Series Speed Controller Series Detailed Safety Instructions Before using PISCO products, be sure to read “Safety Instructions” and “Safety Instruction Manual”on page 27 to 32 and“Common Safety Instructions for Controllers”on page 401 to 402. Warning 1. When controlling the speed of actuators, slowly release the air by adjusting the needle from a fully closed state. In case the needle is opened, actuator can move suddenly. Turn needle in the clockwise direction to close, and in the counterclockwise to open. 2. Do not swing or rotate resin body of the products by force. It may...

Open the catalog to page 4

■ How to adjust the speed 1.Speed adjustment of actuators ② .Reducing speed Turn the needle inthe counterclockwise direction from a fully closed state. The more the needle is opened,the faster the actuator moves. Make sure to tighten the locknut at the desired speed. The speed setting can be changed without tightening the locknut. CONTROLLER Air preparation VALVE Turn the needle in the clockwise direction when the speed is too fast. Make sure to tighten the locknut at the desired speed. The speed setting can be changed without tightening the locknut. MAKE-TO-ORDER Technical PRODUCTS...

Open the catalog to page 5

Controller Series ■ Applicable Tube and Related Products Polyurethane Tube….P.770 Nylon Tube….P.786 Speed Controller Series Fluororesin (PFA) Tube with clean-room package….P.824 Fluororesin (FEP) Tube with clean-room package….P.828 Polyurethane Tune with clean-room package….P.832 411 Speed Control er Series Chart Characteristic chart page OP. Page for special specifications CAD CAD data is available at PISCO website -2D

Open the catalog to page 6

■ Connection: Thread ⇔ Tube Release ring Standard X Weight CAD Hex. Y (øX) (g) file name MAKE-TO-ORDER Technical PRODUCTS information Tube O.D Model code øD CONTROLLER Air preparation VALVE Release ring Mini ※ 1. ④ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. ※ 2. ⑤ in Model code / Replaced with “K” Low cracking pressure type. for 　 (No ⑤ in Model code indicates Low cracking pressure type is not available.) ※ 3. ⑥ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. ※ 4. "L1" and "L2" are reference values...

Open the catalog to page 7

Controller Series ■ Connection: Thread ⇔ Tube JSS Speed Controller Series Release ring Mini Release ring Standard 413 Speed Control er Series Unit：mm X Weigh CAD Hex. Y (øX) (g) file name ※ 1. ④ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. ※ 2. ⑤ in Model code / Replaced with “K” Low cracking pressure type. for 　 (No ⑤ in Model code indicates Low cracking pressure type is not available.) ※ 3. ⑥ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. ※ 4. "L1","L2", "L3" are reference values for height...

Open the catalog to page 8

■ Connection: Thread ⇔ Tube CAD -2D & 3D- (No ⑤ in Model code indicates Low cracking pressure type is not available.) ※ 4.Weight in ( ) is for low cracking pressure type. MAKE-TO-ORDER Technical PRODUCTS information ※ 1.Weight in ( ) is for low cracking pressure type. ※ 2. ④ in Model code / Replaced with “A” Meter-out, for “B” Meter-in for ※ 3. ⑤ in Model code / Replaced with “K” Low cracking pressure type. for ■ Connection: Tube ⇔ Tube (Equal dia.) JSMU Small Union Straight compliant Symbol of flow control direction Symbol of flow control direction on resin body Symbol of flow control...

Open the catalog to page 9

JS series 30Pages

Catalog excerpts

All NIHON PISCO CO. catalogs and technical brochures

JS series
30Pages