Large digital pressure sensor 31 32 - series ・ ● Easily viewable LCD dual displays with 3-colors display. The main display uses 2-colors. Main display: Pressure indication (Red･Green), Sub display：Pressure setting value（Orange） ●Compact installation ※Calculation： A） 34.4×n ）   n：No. of pressure display （ = （ -3.4 ■Normal mode ■Dimensions after installation 34.4mm ■Opening dimensions for multiple installation ●Power-save mode can reduce power consumption by 30% ■Power saving mode The main display will turn off if no button is pushed for 30seconds. Pushing any button enables to return to normal mode. When the main display turns off, SLP (SLEEP) is displayed on the sub display. During power-save mode, the main display will turn off if no button is pushed for 30seconds. ●Excellent cost effectiveness. Price down of -46.5% was achieved, compared to conventional large digital pressure sensor 30 series. New large digital pressure sensor is affordable. ●Lock function Wrong output by misoperation can be prevented. Key icon is displayed in operating mode. 32 series has a copy function where settings can be copied to slave sensors. Saving time for setting. 32 series comes with conne

Vacuum Accessories Series Large digital pressure sensor ⑤ Cable length / Connector spec. ④ Port type and size VUS - 31 VUS - 32 Cod e VUS - 31R VUS - 32R SEU - 31 SEU - 32 （ （Positive press.） Rated. press. range -100.0 ∼ 100.0kPa Compound press.） -101.3 ∼ 0.0kPa（Negative press.） 0.000 ∼ 1.000MPa V 31series：1point SW output + Analog output (1-5V) S pe c. 32 series：2 points SW output + Analog output (1-5V) Cod e P （※32 series only） PNP open collector 2 31series：2 points SW output 32 series：2 points SW output + copy function ④ . Port type and size 1045 N1U （※32 series only） 01 Cod e G1 （※32 series...

■ Model designation of display accessories ① Applicable sensor type ① . Applicable sensor type Cod e Sensor series ※ Wall bracket and Upright bracket are exclusively designed for each sensor type. Panel adapters can be used for both sensor types in common. Please enter 31 in① in model designation when ordering panel adapters. Female connector is only for 31 series. P1 P2 C42 Panel adapter set w/o front cover Panel adapter set with front cover Female connector Front panel protective cover, M3×0.5 male screw M3×0.5 male screw Front panel adapter, Including Front panel adapter, (2pcs) (2pcs) Back...

Vacuum accessories Series Large digital pressure sensor Sensor type Proof pressure Fluid medium Power requirements Current consumption Switch output Switch output Max. supply voltage Residual voltage Hysteresis Hysteresis mode Window comparator mode Response time Output short circuit protection Digital display Indicator accuracy Analog output （Voltage output） Protective structure Ambient temp. range Ambient humidity range Environment Withstand voltage Insulation resistance Vibration proof Shock resistance Temperature characteristics Cable spec. DC12V ∼ 24V（Ripple ±10% or less） 40mA or less（With...

■ 32 series specifications Sensor type Proof pressure Fluid medium Power requirements Current consumption Switch output Switch output Residual voltage Hysteresis Hysteresis mode Window comparator mode Response time Output short circuit protection Digital display Indicator accuracy Analog output （Voltage output） Protective structure Ambient temp. range Ambient humidity range Environment Withstand voltage Insulation resistance Vibration proof Shock resistance Temperature characteristics Cable spec. DC12V ∼ 24V（Ripple ±10% or less） NPN open collector 30VDC ±0.2% F.S. ±1 digit or less Adjustable（※）...

Vacuum Accessories Series Large digital pressure sensor [How to attach accessories] ●How to attach bracket  31 series Wall bracket （ACPG-31-B1 ） Sensor body Sensor body M3× 0.5 male screw （Equipped with bracket） M3× 0.5 Male screw （Equipped with bracket） Sensor body Sensor body M3× 0.5 Male screw （Equipped with bracket） M3× 0.5 Male screw （Equipped with bracket） ●How to attach holder cover  31 series Holder cover Panel holder Sensor body Back holder Holder cover

[Electrical diagram of 31 series] ● SW 1 point output + Analog output ● SW 2 points output DC （＋） （Brown) DC （＋） （Brown） Analog output Load Main circuit Main circuit [Electrical diagram of 32 series] ● 2NPN ＋Analog (Voltage) output（1-5V ） Analog output Main circuit Main circuit O UT 1 （Black） O UT 2 （White） Analog output Load DC 12-24V （Orange） Load Main circuit Main circuit Copy function terminal O UT 2 （White） Copy function terminal [ Parts name]

Vacuum Accessories Series Large digital pressure sensor ■Switch output 3 sensor modes can be selected. ●One point setting mode N. O. mode Positive pressure Negative pressure Positive pressure Negative pressure ●Hysteresis mode N. O. mode Positive pressure Negative pressure Positive pressure Negative pressure ●Window comparator mode N. O. mode Positive pressure ■Analog output Analog output : 1∼5V proportionally to the pressure. ●Compound pressure Analog output (V) ●Negative pressure Analog output (V) ●Positive pressure Analog output (V) 5 1 ■Hysteresis setting Hysteresis setting can prevent chattering...

■Indication color change Indication color for switch ON / OFF can be selected from Red or Green. ■Power-save mode During Power-save mode, the main display will turn off if no button is pressed for 30 seconds. Press any button to turn on the main display temporarily. ■Fine adjustment mode Displayed value can be calibrated within ±2.5% with this function. It can suppress the variations in the displayed values when using multiple sensors. Displayed pressure value This function eliminates slight differences in the output values and allows uniformity in the displayed value. Displayed value of the pressure...

Vacuum Accessories Series Large digital pressure sensor Detailed Safety Instructions Before using PISCO products, be sure to read Safety Instructions and Safety Instruction manual on page 35-39, and Common Safety Instructions for Pressure Sensors on page 794. 1. Make sure to use this product within the rated pressure range specified in the specifications. Damage to the product or malfunction may be caused if the supply pressure exceeds Max. proof pressure. 2. Turn power off before connecting wiring. 3. Wrong wiring will damage the display and / or cause malfunction. 4. This product is not explosion-proof...