pressure-sensor type DS01 description: High quality pressure sensor with internal ceramic membrane in a compact design. High corrosion resistance and long-term stability. As 2-wire (4-20mA) and 3-wire (0-10) available. Convinced by vacuum resistance, good reproducibility and hysteresis and low temperature impact. product features: - suitable for absolute pressure, gauge pressure and vacuum in gases, vapors, liquids and dusts suitable for mechanical engineering, hydraulics and pneumatics long-term stability, vacuum resistance, good reproducibility and hysteresis low temperature influence 0 – 600,0 bar relative – depending on design design: body material: seals: membrane: process connection: supply voltage: current consumption: characteristic deviation: long-term drift: temperature deviation: plug: process pressure range: protection: option: temperature: pressure-sensor with internal ceramic membrane Cr-Ni-steel FPM, EPDM ceramic Al2O3 96% Stainless steel 1.4404/316L or 1.4571/316Ti 10–30V DC on 2-wire 4–20mA 14–30V DC on 3-wire 0–10V ≤ 30mA; on 2-wire 4-20mA ≤ 6mA; on 3-wire 0-10V ≤±0,5% FS ≤±0,15% FS / year not cumulative measuring range 0-0,25 bar up to 0-2,5 bar ≤±0,5% FS/10 K (Zero/Span) measuring range 0-4 bar up to 0-600 bar ≤±0,4% FS/10 K (Zero/Span) EN 175-301-803-A (formerly DIN 43650-A): body PA Polyamid, contacts tinned, seal NBR 0 – 600 bar relative, for absolute and vaccum pressure on request Plug type acc. to EN 175-301-803 IP 65 EN/IEC 60529 ATEX II Ex-Schutz (on request) process: -40°C – +100°C or 125°C (temperature decoupler neccessary) environment: -40°C - +85°C

Datasheet diameter: electronical connection plug EN 175-301-803-A process connection: G ½“ B with internal drill (IB) article number: type DS01 example: DS01030101 pressure sensor with internal ceramic membrane output: 0 – 10 V seal: FPM range of pressure: 0 – 1 bar connection: G ¼“ B Image simil