CABLE LADDER
71Pages

{{requestButtons}}

Catalog excerpts

CABLE LADDER - 2

CABLE LADDER AVAILABLE FINISHES Perforations on side and bottom of beams for direct mounting on supports On request : SS 304 and 316, Aluminium, Epoxy HERCULE RANGE On request : SS 304 and 316, Aluminium, Epoxy On request : SS 304 and 316, Aluminium, Epoxy H: 48/72/95, w: 250 to 600 mm rungs are crimped H120 and w > 600 mm Rungs are riveted with aviation type rivets (bolted on request) Crimped or delivered in kit to assemble on site Horizontal or Vertical mounting On request : SS 304 and 316, Aluminium, Epoxy Crimped, allows heavy loads (up to NEMA 20 C) High resistance : welded ATLAS RANGE...

Open the catalog to page 2
CABLE LADDER - 3

RANGE OVERVIEW C shaped, alternate, clinched C shaped. Crimped, riveted or bolted Hammer-on or bolt-on. Easy to assemble C35x20 Suitable for use with mechanical pipe clamps RUNG SPACING Excellent strength/weight ratio thanks to "C" profile beams. Recyclable Optimised transportation: articulated cable ladders (except HDG)  maximum volume saving Recyclable Recommended for use with power cables in aluminium. On-site assembly possible Covers locked with screws Recyclable High capacity Recyclable Recyclable Suitable for use in severe conditions (mechanical, corrosion) CABLE LADDER

Open the catalog to page 3
CABLE LADDER - 4

CABLE LADDER | SR SR STRAIGHT SECTIONS SR ladders are particularly recommended for any light to medium duty application requiring ventilation of cables. • Clinched construction • Cost-effective solution: good strength/weight ratio thanks to non aggressive C-shaped perforated beams • High inertia side rails • Long life span: clinched construction with high corrosion resistance especially in hot dip galvanized finish • Great versatility: beams perforated on side, top and bottom for direct fixing on horizontal or vertical supports • case of vertical mounting, use B and BK In mechanical pipe...

Open the catalog to page 4
CABLE LADDER - 5

CABLE LADDER | SR SR STRAIGHT SECTIONS CONNECTING UNITS 45° Horizontal bends Horizontal crosses Inside/outside bends Horizontal tees CABLE LADDER Other connecting units Other bends, Tees, Crosses: use ED bendable coupler Reducers made with EP straight coupler NEMA CLASSIFICATION NEMA Classification VE1 2009 Support span: 3 m Type Beam thickness Stainless steel

Open the catalog to page 5
CABLE LADDER - 6

CABLE LADDER | SR SR STRAIGHT SECTIONS SR 55 M Weight Kg/ml Weight Kg/ml

Open the catalog to page 6
CABLE LADDER - 7

CABLE LADDER | SR SR STRAIGHT SECTIONS SR 100 M Weight Kg/ml Weight Kg/ml CABLE LADDER COVERS AND CLIPS COVERS M Weight Kg/ml Weight Kg/ml

Open the catalog to page 7
CABLE LADDER - 8

CABLE LADDER | SR COUPLERS EP SR STRAIGHT COUPLERS P EA SR VERTICAL ADJUSTABLE COUPLERS Description

Open the catalog to page 8
CABLE LADDER - 9

CABLE LADDER | SR CONNECTING UNITS CABLE LADDER SR 90° HORIZONTAL BEND COVERS - CO V90 Code

Open the catalog to page 9
CABLE LADDER - 10

CABLE LADDER | SR CONNECTING UNITS SR 45° HORIZONTAL BEND COVERS - CO V135 Code

Open the catalog to page 10
CABLE LADDER - 11

CABLE LADDER | SR CONNECTING UNITS SR INSIDE/OUTSIDE ADJUSTABLE VERTICAL BENDS CABLE LADDER SR INSIDE/OUTSIDE VERTICAL BEND COVERS - CO CC/CV Code

Open the catalog to page 11
CABLE LADDER - 12

CABLE LADDER | SR CONNECTING UNITS SR HORIZONTAL TEES SR HORIZONTAL TEE COVERS - CO TE Code

Open the catalog to page 12
CABLE LADDER - 13

CABLE LADDER | SR CONNECTING UNITS SR HORIZONTAL CROSSES CABLE LADDER SR HORIZONTAL CROSS COVERS - CO CX Code OTHER CONNECTING UNITS Other bends, Tees, Crosses: use ED bendable coupler Reducer made with EP straight coupler

Open the catalog to page 13
CABLE LADDER - 14

CABLE LADDER | SR ACCESSORIES END PLATES: ON REQUEST Weight Kg/ml Weight Kg/ml • or partitions of min 24mm F • tandard length: 3 m S

Open the catalog to page 14
CABLE LADDER - 15

CABLE LADDER | SR ACCESSORIES CABLE DROP-OUTS - SC P HOLD DOWN GUIDING CLAMP - SL CABLE LADDER HOLD DOWN BRACKET - EQU 75X45 P

Open the catalog to page 15
CABLE LADDER - 16

CABLE LADDER | EAC EAC STRAIGHT SECTIONS EAC cable ladders are particularly recommended for power cables management and any other light to medium duty application • Rungs are assembled under the beams with aviation type rivets or buttonhead bolts allowing maximum loading capacity • They allow an excellent ventilation of cables • Non aggressive design: tubular at the top and flat at the bottom • Great adaptability: rungs can be clinched, bolted or riveted. • available heights: 48, 72, 95 and 120 mm 4 • Other materials on request: Stainless Steel, Aluminium, coatings • Optimised...

Open the catalog to page 16
CABLE LADDER - 17

CABLE LADDER | EAC EAC STRAIGHT SECTIONS CONNECTING UNITS 45° Horizontal bends Horizontal tees Horizontal crosses CABLE LADDER EAC INSIDE/OUTSIDE VERTICAL BEND UNITS: ON REQUEST The same assembly kit / unit is used for both types of vertical bend / riser with quantity to be estimated according to required angle and radius. Custom-made assembled kit to be fixed to other ladder systems by means of couplers which can be either bolted or clenched. Mouting instructions: provide for supports at each end of fitting or directly under.

Open the catalog to page 17
CABLE LADDER - 18

CABLE LADDER | EAC EAC STRAIGHT SECTIONS EAC H48 - 3M P

Open the catalog to page 18
CABLE LADDER - 19

CABLE LADDER | EAC EAC STRAIGHT SECTIONS EAC H72 - 3M P CABLE LADDER

Open the catalog to page 19
CABLE LADDER - 20

CABLE LADDER | EAC EAC STRAIGHT SECTIONS EAC H95 - 3M P

Open the catalog to page 20
CABLE LADDER - 21

CABLE LADDER | EAC EAC STRAIGHT SECTIONS EAC H120 - 3M P CABLE LADDER

Open the catalog to page 21
CABLE LADDER - 22

CABLE LADDER | EAC COVERS AND CLIPS COR STRAIGHT SECTION COVERS M Weight Kg/ml • tandard length: 2 metres S • clips per cover 8 Use 8 clips per cover length

Open the catalog to page 22
CABLE LADDER - 23

CABLE LADDER | EAC COUPLERS TL11_ATT_4 EIT EAC TUBULAR INTERNAL COUPLERS P Fasten with TRCC M6x12 bolt EID EAC STRAIGHT INTERNAL COUPLERS P CABLE LADDER Fasten with TRCC M6x12 bolt EIA EAC VERTICAL ADJUSTABLE INTERNAL COUPLERS P Fasten with TRCC M6x12 bolt

Open the catalog to page 23
CABLE LADDER - 24

CABLE LADDER | EAC CONNECTING UNITS EAC 90° HORIZONTAL BEND COVERS - CO V90 P

Open the catalog to page 24
CABLE LADDER - 25

CABLE LADDER | EAC CONNECTING UNITS CABLE LADDER EAC 45° HORIZONTAL BEND COVERS - CO V135 P G

Open the catalog to page 25
CABLE LADDER - 26

CABLE LADDER | EAC CONNECTING UNITS

Open the catalog to page 26
CABLE LADDER - 27

CABLE LADDER | EAC CONNECTING UNITS CABLE LADDER EAC HORIZONTAL CROSS COVERS - CO CX P G

Open the catalog to page 27
CABLE LADDER - 28

CABLE LADDER | EAC ACCESSORIES HOLD DOWN GUIDING CLAMP Code • eavy load fastening of STRUT channels on I beam H • asten with TRL M6x30 bolt + HE nut and EAC I beam hold down F bracket • he illustrated configurations require 2 TRL M6x30 bolts + HE T nuts, 2 EAC I beam hold down brackets and 1 EAC I beam clamp ELGR SIDE RAIL END CAPS P

Open the catalog to page 28
CABLE LADDER - 30

CABLE LADDER | HERCULE HERCULE STRAIGHT SECTIONS ON REQUEST • Length 6M, other connecting units radii, unequal cross/tee, 200/400mm rung spacing Recommended for any medium to very heavy duty applications. • Save on transport by opting for on-site assembly • High loading capacity for aluminium power cables • Horizontal or vertical mounting, suitable for cable ties • Available in G, HDG, SS304, SS316, aluminium • Crimped construction promotes high corrosion resistance • Safe C rungs and Z beams with covers locked by nuts & bolts • Recyclable • Electrical continuity in compliance with IEC...

Open the catalog to page 30

All NIEDAX FRANCE catalogs and technical brochures

  1. SUPPORT

    55 Pages

  2. TRUNKING

    35 Pages

  3. PROFILE

    15 Pages

  4. MESH TRAY

    35 Pages

  5. EN Catalogue

    369 Pages