KBMD-240DMULTI-DRIVE ®Variable Speed DC Motor Control For Shunt Wound and PM Motors Patented Overload Circuit 1/100 - 1 Hp @ 115 VAC - 50/60 HzA 1/50 - 2 Hp @ 230 VAC - 50/60 HzA TYPICAL APPLICATIONS • Conveyors • Packaging Machines • Feeders • Printing Equipment c^Xus C € STANDARD FEATURES • Plug-in Horsepower Resistor®A. Allows a single model to be used on a wide range of motors. • Dual Voltage Switch. Used to select AC line voltage operation of 115 or 230V. • Built-in AC Line Fuse • MOV Transient Protection (20 JOULE) • Trimpots: MIN, MAX, IR, CL, ACCEL, DECEL OPTIONAL FEATURES • Auxiliary Heatsink (P/N SC-9861). Extends control rating to 1 Hp at 115V and 2 Hp at 230V. • Forward-Brake-Reverse Switch (P/N SC-9860). Includes switch and prewired dynamic brake resistor. Load Regulation Line Voltage Regulation Multi-Drive™ represents the latest in state-of-the-art design for variable speed DC motor controls. It is rugged and compact is size and is able to handle both 115 and 230V AC line inputs by setting the built-in Dual Voltage Switch. In addition, the single model can be used on a wide range of motors by selecting and inserting the appropriate Plug-in Horsepower Resistor®. The standard model, KBMD-240D, controls all motors through 5/4 Hp at 115V and 1 >2 Hp at 230V. By installing the KB Auxiliary Heatsink, the horsepower range is increased to 1 Hp at 115V and 2 Hp at 230V. The versatility of the control is enhanced with the optional Forward-Brake-Reverse Switch Kit. The electronics for the Multi-Drive™ consists of KB's patented KBMM™ speed control module. Its field-proven reliability is confirmed by over 100,000 controls presently in operation. The KBMM™ module is housed in a rugged metal (not plastic, like other inexpensive drives) enclosure. Keyhole slots facilitate mounting while a readily accessible terminal block simplifies wiring. Included with each control is a detailed instruction and user manual. Control Linearity CL/Torque Range MIN Speed Trimpot Range MAX Speed Trimpot Range A Rating indicated is with Auxiliary Heatsink. Maximum rating without Auxiliary Heatsink is 1/2 Hp at 115V and 1 Hp at 230V. * Performance is for 90V PM motors on 115 VAC and 180V PM motors on 230 VAC. ARMATURE FIELD* *Use for shunt motors only. * CE Compliance Requires KBRF-200A RFI Filter A Complete Line of Motor Drives

FEATURES & FUNCTIONS (1) Rugged all aluminum enclosure (2) Keyhole slots facilitate mounting (4) ON/OFF Power Switch (5) Speed Control Knob (6) Auxiliary Heatsink (optional) (7) FWD-BRK-REV Switch (optional) (8) Dual Voltage Switch (“115" or “230") (9) AC Line Fuse Included (10) Plug-in Horsepower Resistor® (11) Barrier Terminal Block (12) Internal adjustments for MAX, MIN, IR, CL, ACCEL and DECEL (not (14) Armature Fuse (customer supplied) * Must be used with Auxiliary Heatsink. ** For overlapping motor horsepower range use lower value Plug-in Horsepower Resistor®. CONTROL WITHOUT AUXILIARY...