FAST ACTING PROTECTORS \tf " tfA r C-FAP series are resettable overcurrent protection device with high speed response. Protecting electronic equipment against transient voltage caused by short circuits, AC power cross, induction and lightning surge. • MOSFET tmM^mm%i:^M • SjlJfc^ (1 /<sec Jiirt) • RoHS Mlfo • Integrated MOSFET and Current detection circuit • Uni- or Bi-directional trigger current • Fixed or Variable trigger current • Protection against lightning surge (With use of overvoltage component GDT) • Fast response (less than 1 y. sec) • Small energy consumption (1 OOnJ) • RoHS Compliant Sff*°-S (RS-232,422,485), LVDS, CANBUS, ^^/VDSL *-h\ ^r-^'JU^E^A, ONT, Gateway, Communication port (RS-232,422,485), LVDS, CANBUS, Microwave links, Process control system, Smart Grid Communication equipments, Ethernet, Elevator / Escalator, Conveyor equipments, Automated Test Equipments (ATE), Measurement / Test equipment, Railway communication system, Security camera and etc. Voice/VDSL card, Cable modem, ONT, Gateway, MDU, T1 / E1 and wireless communication equipment. PART NUMBER DESIGNATION Npp^fft Product name /'j—Series name < >/\';i/XjE£fe Impulse Voltage Rating H=DFI\I package Hold to Trip Ratio <>;m/XlE£fe Trigger current

FAST ACTING PROTECTORS ト 　BASIC METHOD FOR OVER CURRENT PROTECTION 周 波 Protected Circuit る 過 電 圧 保 護 デ バ イ ス で、ガ ス 放 電 管 GDT Gas Discharge Tubeや、 バ リ ス タ MOV Metal Oxide Varista を使用します。 ● C-FAP保護される回路を過電圧から保護する定電圧ダ イオー ド ● OVP2保護される回路に流れる異常電流を制限します。 ■ C-FAP、 GDT、 MOV の選択ガイド　SELECTION GUIDE FOR C-FAP, GDT, MOV 過 ・ Choose the C-FAP with the impulse voltage (Vimp) ・信号ラインに加わるサージ電圧以上のインパルス電圧 Vimp を持つ C-FAP を選定 ・保護される回路の電流を制限するための トリガー電流を持 つ C-FAP を選定 higher than the surge voltage of the signal line. ・ Choose the C-FAP with trigger current correspond to the maximum current of the protected circuit....

FAST ACTING PROTECTORS Please note when selecting the correct product that there is direction of the trigger current in C-FAP series. デ Direction of trigger current Product series name Circuit Symbol & Operating Waveform Line Side Line Side C-FAP Device ITRIP CURRENT (100 mA/div) Type of Bi-directional trigger current with 2 circuit G C-F AP-PLC-F AP-PK SeriesApplication f or Telecommunication (SLIC Protection) Part Number Absolute Max.Ratings Vimp(V) Electrical Characteristic Itrigger Min.(mA) Itrigger Max.(mA)

FAST ACTING PROTECTORS ト Type of Bi-directional trigger current with 1 circuit 波 C-FAP-CAC-F AP-CX Series:Application Industrial and Consumer RS Port Protection Absolute Max.Ratings Vimp(V) Electrical Characteristic Itrigger Min.(mA) Itrigger Max.(mA) For C-FAP-CX Series, Itrigger current can be adjusted by external resistor

FAST ACTING PROTECTORS Type of Uni-directional trigger current with 1 circuit C-FAP-KE Series Application for Industrial and Consumer Gigabit Ethernet Part Number Absolute Max.Ratings Vimp(V) Electrical Characteristic Itrigger Min.(mA) Itrigger Max.(mA) G C-FAP-DT Series Application for Industrial and Consumer Gigabit Ethernet Absolute Max.Ratings Vimp(V) Electrical Characteristic Itrigger Min.(mA) Itrigger Max.(mA) ARAMETERS G Vimp : Peak impulse voltage withstand with duration less than 10ms. G Vrms : Continuous A.C. RMS voltage G Itrigger : Current required for device to go from operating...

FAST ACTING PROTECTORS ト TYPICAL CHARA Lighting Surge test circuit C-FAP Trigger current (400mA) AC Power Cross test circuit C-FAP Operation Frequency characteristic ONMENTAL CHARACTERISTICS Item esting Condition Operating Temp Humidity HAST Temp Cycle Soliderability Meets Specification Meets Specification Meets Specification Meets Specification

FAST ACTING PROTECTORS U yn— ffiM^zi* SOLDER REFLOW RECOMENDATIONS