Component Specifications and Ratings

This document section outlines the key specifications and ratings for a component identified as "S L P 8 A 2 0". The parameters include mechanical dimensions, electrical characteristics, and environmental tolerances.

Mechanical Dimensions and Tolerances

• Dimensions are provided with specific tolerances, generally ±0.3 unless otherwise noted.
• Examples of dimension values include 12.5 mm, 6.4 mm, 7 mm, 18.8 mm ±0.4, 9.4 mm ±0.5, 3.2 mm ±1, 11.4 mm, 21 mm, 15 mm, and 12.9 mm with asymmetric tolerance (+0.1 / -0.4).
• Angular measurement is specified as 32°.

Electrical Characteristics

• Initial Contact Resistance: Not explicitly quantified here but implied as a critical parameter.
• Dielectric Strength: Specified but exact value not provided in this excerpt.
• Insulation Resistance: Mentioned as a key parameter.
• Electrical Life: Measured in cycles, indicating durability under electrical load.
• Operating Force: Important for mechanical actuation, though specific values are not detailed here.
• Rating Marking: Part number and rating marking are indicated as important for identification.

Environmental Conditions

• Operating Temperature Range: Specified but exact limits are not included in this excerpt.
• Storage Temperature Range: Also specified but exact values are not provided here.

Notes

• Unless otherwise specified, tolerances default to ±0.3 mm.
• Markings on the part include identifiers such as (1), (P), (A), and (B), likely referring to specific features or test points.

This summary captures the essential technical parameters and tolerances necessary for understanding the component's design and operational limits. For complete values and detailed procedures, refer to the full technical datasheet.