CMM Sries Micro-connectors NICOMATIC specializes in the design, development and manufacture of electronic connectors. The CMM MICRO CONNECTOR interconnection system is a 2mm pitch connector (square matrix) with proven high reliability under the most extreme environmental conditions: - Flexible architecture: "Board to Board", "Board toWire" and "Wire toWire" configurations - Modular and hybrid design: mixed layout full option with Low Frequency - LF (up to 5 Amp) - and High Frequency - HF - (up to 1 1 GHz) and High Power - HP - (up to 30 Amp) - High reliability contact design & High performance...

CMM Spcifications (with LF contacts) MATERIALS INSULATOR: Spcial PPS (Polyphenylene Sulfide Fiberglass filled thermoplastic) UL 94-V0 驕 Radiation resistance No humidity absorption Օ Oxygen free Note : PPS characteristics are recognized for space applications P.C. LF CONTACTS : Male: Tail : copper alloy / Ni + Au flash 0,1 |j Contact area : copper alloy / Ni + Au > l|j CRIMP LF CONTACTS : Male: Body : copper alloy / Ni + Au > l|j FIXING HARDWARE: Jackscrew: Stainless steel. Female: Body : copper alloy / Ni + Au 0,2 | Socket : beryllium copper / Ni + Au > l,25|j Female: Body : copper alloy / Ni...

6 HIGHLIGHT ON CMM CONNECTOR BENEFITS • Unlimited style of connector: - Mixed-layout:High, Low frequency & High power in 1 connector - PCB solder, SMT, press fit, crimp contacts - Board to board, board to wire, wire to wire connections - Very small footprint: 2 mm pitch (saves up to 60% space & 50% weight over conventional connectors) • Meets or exceeds the relevant electrical & environmental performances described in MIL-DTL-55302F & BS-9525-F0033 standards • Excellent mechanical & environmental characteristics • Built-in jackscrews for high vibrations • Resistance to solvents, radiations &...

5 HF / HP contacts specifications MATERIALS ELECTRICAL MECHANICAL ENVIRONMENTAL HF / HP CONTACTS PART NUMBERING • Spring loaded parts Be/Cu gold plated • Other metal parts Copper alloy • Insulator PTFE (HF) • Retaining clip Be/Cu Ni plated • Mechanical operations Up to 2500 cycles • Insertion force From 0.60 to 5 N per contact • Withdrawal force From 0.50 to 2 N per contact • Secure overlapping 1.30 mm • Contact replacement in insulator 50 cycles for HF / HP 30 series (5 cycles for HF / HP 22 series) High Power (HP) Contact High Frequency (HF) Contact Intensity Series 30 : 20 A Impedance 50Ù...

Straight PCB TypeY 90° PCB TypeV Straight SMT TypeT 90° SMT Type R Crimp Type S - C CMM RANGE USE STRAIGHT ON PCB 90° ON PCB STRAIGHT SMT 90° SMT CRIMP L=6,50 / 8,00 / 10,50 / 12,00 / 14,50 / 16,00 mm upon request (only for straight on PCB male contacts) Female Male Straight PCB Type PF Press fit 7 Standard contact Any other type of contact upon request only LF : low frequency contacts PRESENTATION INFORMATION TABLE Male Y YL YM YX V VL T TL R C S 100/200 L=3,0 L=4,5 L=5,1 L=9,1 L=3,0 L=4,5 L=2,25 L=3,35 L=0,9 Gauge 22 Gauge 24-28 Female Y YL YC PF V VL T TL R C S L=3,0 L=4,5 L=1,2 Press fit...

90° PCB Straight SMT 90° SMT Card edge Straight Crimp 90° Crimp Straight Straight PCB solder 90° solder Type D Type E Standard contact Any other type of contact upon request only Female CMM RANGE TYPICAL USE TYPE OF CONTACTS TO BE USED IN THE CMM CONNECTORWITH CAVITIES FOR HF/HP CONTACTS ONLY TYPE D FOR SPECIAL CONTACTS ON PCB (Eg.221D00F22-00 nbr of special contact-1300CMM) TYPE E FOR SPECIAL CONTACTS ON CABLE Straight on PCB 90° on PCB Straight SMT 90° SMT Card edge Straight Crimp 90° Crimp Straight solder 90° solder Male 100/200 Female Male 30-1300-CMM 30-1300-45 30-1400-CMM 30-1400-45 30-1500-CMM...

Female CMM RANGE TYPICAL USE TYPE OF CONTACTS TO BE USED IN THE CMM CONNECTORWITH CAVITIES FOR HF/HP CONTACTS ONLY TYPE D FOR SPECIAL CONTACTS ON PCB TYPE E FOR SPECIAL CONTACTS ON CABLE Straight on PCB 90° on PCB Straight SMT 90° SMT 90° SMT Card edge Straight Crimp 90° Crimp Straight solder 90° solder Male 100/200 Female 30-3300-CMM 30-3300-45 30-3400-CMM 30-Male 3400-45 30-3500-CMM L=3,0 L=4,5 L=3,0 L=4,5 30-3600 30-3500 no LF contact 30-3500-12 30-33XX 30-33XX 220 30-4300-CMM 30-4300-45 30-4400-CMM 30-4400-45 Female L=3,0 L=4,5 L=3,0 L=4,5 30-4600 30-4500 30-43XX 30-43XX Male 30-3300-CMM...

10 Female CMM RANGE TYPICAL USE TYPE OF CONTACTS TO BE USED IN THE CMM CONNECTORWITH CAVITIES FOR HF/HP CONTACTS ONLY TYPE D FOR SPECIAL CONTACTS ON PCB TYPE E FOR SPECIAL CONTACTS ON CABLE Straight on PCB 90° on PCB Straight SMT 90° SMT Straight Crimp 90° Crimp Straight solder 90° solder Male 100/200 Female Male 220 Female Male 320 Female 22-1300-12 22-1300-14 22-1400-12* 22-1400-14* Male L=3,0 L=4,5 22-1400-22** 22-1400-24** 22-1312-ZS 22-1320-ZZ 340 L=3,0 L=4,5 22-2300-12 22-2300-14 22-2400-12* 22-2400-14* Female L=3,0 L=4,5 22-2400-22** 22-2400-24** 22-2312-ZS 22-2320-ZZ L=3,0 L=4,5 12 =...

Female Male 90° PCB Straight SMT 90° SMT Straight Crimp 90° Crimp Straight Straight PCB solder 90° solder Type D Type E * First row : 22-3400-12 / 22-3400-14 / 22-4400-12 / 22-4400-14 ** Second row : 22-3400-22 / 22-3400-24 / 22-4400-22 / 22-4400-24 11 CMM RANGE TYPICAL USE TYPE OF CONTACTS TO BE USED IN THE CMM CONNECTORWITH CAVITIES FOR HF/HP CONTACTS ONLY TYPE D FOR SPECIAL CONTACTS ON PCB TYPE E FOR SPECIAL CONTACTS ON CABLE Straight on PCB 90° on PCB Straight SMT 90° SMT Straight Crimp 90° Crimp Straight solder 90° solder Male 100/200 Female Male 220 Female Male 320 Female 22-3300-12 22-3300-14...

12 Male housing marking CMM 100/200 CMM 220 CMM 320/340 Marking : NCM (Nicomatic) + date code (Lot number) Marking 1 : NCM (Nicomatic) + date code (Lot number) Marking on two faces if the number Connector P/N of LF contacts is < to 10. LF contact number 1 Marking 2 : NCM (Nicomatic) + date code (Lot number) : CMM 220 mixed layout (LF + HF/HP) CMM 220 with HF/HP contacts CMM 220 with 04 LF contacts Marking LF contacts type :Y-YL-V-VL-R-T-S-C Marking 2 : NCM (Nicomatic) / date code (Lot number) : CMM 320 mixed layout CMM 320 with HF/HP contacts CMM 340 Marking LF contacts type :Y-YL-V-VL-S-C Marking...